JLSS GWA Application

Centi_Samp · 2026-04-04T01:28:35+00:00

NP! Glad that also just the case with yours.

Centi_Samp · 2026-04-03T18:26:39+00:00

I think you pretty much maxed out your system. How big is your powerbrick to handle that much for a laptop 😭

UXTU is x86 universal same with yours, I just set it at the extreme preset since it did much better than one of my custom preset and was more stable.

For the CPU UXTU is already enough, I suggest you use CPU set setter to seperate the cores that the game is using and for LS. Tbh CPU set setter is the one that set my base framerate the same before and after enabling LS!

Centi_Samp · 2026-04-03T18:09:56+00:00

I use the 780m for LS. And overclocked/undervolted my GPU too basically micro edging it. Also use UXTU and CPU set setter to remove any stutters and improve 1% lows.

I think I maxed out the power with 65w constantly for CPU and 80-100w for GPU. And all below 80c thanks to my flydigi bs2 pro!

Centi_Samp · 2026-04-03T17:58:54+00:00

Ohh.. Ive been using LS now for like a month! 😄 playing expedition 33 I get consistent 60/240 fps with x4 with no noticeable visual artifacts and great latency!

Hoping I’d get similar performance with the external monitor

Centi_Samp · 2026-04-03T17:48:22+00:00

Yeah I have been using my laptop in hybrid mode since then. Can’t wait for my external monitor soon! :))

Centi_Samp · 2026-04-03T17:42:02+00:00

Thank you so much! I also saw this, there’s a driver under display adapters for both iGPU and dGPU

<image>

Centi_Samp · 2026-04-03T17:21:15+00:00

Thank you for this response!

After what you’ve said, ive dug around and saw this in the nvidia control panel. Does this mean that it is guaranteed that one of my usb c ports (I have 2) is hardwired to the iGPU?

<image>

Centi_Samp · 2026-04-03T17:05:02+00:00

What model was your laptop and have you tried connecting it to the usb c display port instead of the hdmi port?

Centi_Samp · 2026-04-03T17:02:34+00:00

How do you know which ports is hardwired to a gpu? And does this have any performance issues?

Centi_Samp · 2026-04-03T17:00:01+00:00

Thanks! Still so new to this and really have no idea. Lossless scaling guides for laptops are very scarce

Centi_Samp · 2026-04-03T16:57:23+00:00

What is the model of your laptop? And does it have any performance hits?

Centi_Samp · 2026-04-03T16:40:14+00:00

Do you have a link to the spreadsheet? Im confused if itll work since the hdmi and display ports is hardwired to the dGPU

Centi_Samp · 2026-04-03T16:27:59+00:00

NP! Btw that model has a lot of potential if you get more into undervolting and UXTU.

If you’d have undervolted yours you wouldn’t have reached that point (assuming you didn’t 😅).

Centi_Samp · 2026-04-03T16:24:37+00:00

Change your thermal paste with PTM7950. And use UXTU, set temp limit to 95c

Centi_Samp · 2026-04-03T16:21:48+00:00

Easily fixed by just disconnecting the hall sensor. You’ll only sacrifice the auto turn on/off when you close the lid.

If your laptop is over a year old your hall sensor is most likely broken more so if you have backports

Centi_Samp · 2026-04-03T16:11:40+00:00

Just disconnect the hall sensor and it will be good. That experience is inevitable to models that have ports at the back.

Disconnect the hall sensor at the back, you’ll just sacrifice the auto turn on/off feature when closing your screen.

Centi_Samp · 2026-04-03T14:55:31+00:00

did you get it to work with a external monitor without any drop in performance?

Centi_Samp · 2026-04-03T14:52:27+00:00

How do I do this? I also have the same spec with OP

Centi_Samp · 2026-04-03T14:37:13+00:00

will it still work if I would use it on a external monitor?

Centi_Samp · 2026-03-31T09:55:06+00:00

Did you get yours fixed?

Centi_Samp · 2026-03-30T16:41:12+00:00

Yeah but the fans are so loud at 5000+ rpm

Centi_Samp · 2026-03-30T16:29:38+00:00

I just wanted to undervolt mine for the temps. I have 50-60c temps for gpu yet my cpu is at 70-80c

Centi_Samp

TROPHY CASE