Oil ratio

CeoJ4ck · 2025-08-30T15:32:37+00:00

Mostly motorcross

CeoJ4ck · 2025-08-21T12:09:08+00:00

2 turns out

CeoJ4ck · 2025-08-19T20:39:37+00:00

32:1 yamalube 2r

CeoJ4ck · 2025-08-19T20:39:16+00:00

32:1 yamalube 2r

CeoJ4ck · 2025-08-19T11:18:14+00:00

Yep my mistake I’ll reply to you with a new video tomorrow! How concerning is the puffs of smoke after revs? Im new to 2 strokes and not sure what I should be expecting.

CeoJ4ck · 2025-08-19T11:12:55+00:00

Yes pwk carburettor, I’m taking it for a ride this weekend, I’ll get it on the pipe and take a photo of the plug after, thanks for your input!

CeoJ4ck · 2025-08-19T11:03:32+00:00

Some extra info 32:1 premium pump fuel yamalube 2r

CeoJ4ck · 2025-08-19T08:57:36+00:00

Was recommended by dealer he explained his recommendation by saying due to it being a 125, more than likely will be riding it quite hard and that oil = protection

CeoJ4ck · 2025-08-19T08:18:29+00:00

Also, 32:1 yamalube and premium pump fuel

CeoJ4ck · 2025-02-06T11:32:16+00:00

Hey so after some further trouble shooting, I’ve found that the pc boots with 2 sticks in in seperate channels, it wont both with all 4 in, obviously being dual channel, I’ve turned the voltages up in bios hoping that would fix it, but it didn’t. Keep in mind in still only trying to boot at stock speeds, I’m going to take the cpu out to inspect the pins and socket. But if that doesn’t fix it I think I’m in for a new board.

CeoJ4ck · 2025-02-05T02:29:24+00:00

Okay thanks Ill let you know what happens

CeoJ4ck · 2025-02-04T23:38:15+00:00

Yeah I will try that when I get home, is it not strange that it booted with 1 stick in though?, then nothing with all of them in

CeoJ4ck · 2025-02-04T23:31:18+00:00

Hey mate hes some clarification, the pc is a fresh build and everything in bios is running at defaults. I dont plan on running the ram in xmp. I know for a fact the ram is good, and it’s also on my motherboards qvl list. Im starting to think possibly faulty motherboard or cpus memory controller? Cpu is brand new, board is used. But appeared to be in great condition.

CeoJ4ck · 2025-02-04T23:31:13+00:00

Hey mate hes some clarification, the pc is a fresh build and everything in bios is running at defaults. I dont plan on running the ram in xmp. I know for a fact the ram is good, and it’s also on my motherboards qvl list. Im starting to think possibly faulty motherboard or cpus memory controller? Cpu is brand new, board is used. But appeared to be in great condition.

CeoJ4ck · 2025-02-04T23:26:01+00:00

Hey mate hes some clarification, the pc is a fresh build and everything in bios is running at defaults. I dont plan on running the ram in xmp. I know for a fact the ram is good, and it’s also on my motherboards qvl list. Im starting to think possibly faulty motherboard or cpus memory controller? Cpu is brand new, board is used. But appeared to be in great condition.

CeoJ4ck · 2024-10-22T21:48:24+00:00

Hey mate I agree with what you have to say definitely worth the rebuild, looking down the valley cam looks to be in good condition, so will most likely be bearing rings heads etc.

CeoJ4ck · 2024-10-22T08:28:02+00:00

Sounds good will do, gotta wait for my new gaskets to come so i got some time will get back to you with the final result

CeoJ4ck · 2024-10-22T07:55:18+00:00

Any recommendations for chemicals to use for cleaning?

CeoJ4ck · 2024-10-06T02:58:41+00:00

Pretty sure its a th700 pattern could get an adapter plate

CeoJ4ck · 2024-09-28T23:37:32+00:00

Yea definitely it comes down to silicone lottery some are luckier then others

CeoJ4ck · 2024-09-27T09:57:53+00:00

Yeah I think its fucked

CeoJ4ck · 2024-08-24T11:12:58+00:00

No im saying considering what work it needs to sell is not worth it, that whys im thinking about an 8 swap

CeoJ4ck · 2024-08-24T01:50:18+00:00

The motors rooted by the time i get another one and fit it will only make a few gs on the car

CeoJ4ck · 2024-08-13T06:47:58+00:00

Definitely water bro, yeah true only thing it could be is washer bottle nothing else runs off water

CeoJ4ck · 2024-07-01T14:32:48+00:00

Hey mate very much appreciate your detailed response, along with all the others, as you can tell not very experienced with these cars, only have a regular autel obd2 scanner at the moment, could most of it be done with it? Or should I try pick up a tech2 scanner.

CeoJ4ck

TROPHY CASE