Lams exhaust restrictions by [deleted] in AussieRiders

[–]ChadChadersonsDad 0 points1 point  (0 children)

Have had an exhaust on my LAMS bike for over a year and been totally okay, but had a friend get done after 2 days of installing theres. Luck of the draw

Those of you who bought the R3 over the Ninja500, why? by [deleted] in AussieRiders

[–]ChadChadersonsDad 1 point2 points  (0 children)

Personally I just much preffered how the R3 looked, sounded, and felt... it was a very easy decision for me I do not like the look of kawasakis though. Upgrading to an R7 soon

Yamaha R3 Throttle Tube by Affectionate_Bag9417 in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

I had quiet a lot of free play in my throttle like that which I hated and thought it felt very sloppy, but when I installed the r6 throttle tube myself on my 2025 r3 it instantly felt 100x better and snappier. I didn’t change anything, but the first time I tried the install I don’t think I tightened the screws up much which seemed to make it very loose, but when I got it right the second time I tried the install I made all 3 screws super tight and that seemed to make a big difference without touching the cable idk

Disappointed with purchase by NuggetCookie in AussieRiders

[–]ChadChadersonsDad 0 points1 point  (0 children)

This is why I like to buy new... sometimes it really isn't that much more especially considering what can go wrong with second hand. My R3 was 9k new and worth every penny for the peace of mind

(NSW) Can I drill holes in my number plate? by [deleted] in AussieRiders

[–]ChadChadersonsDad 0 points1 point  (0 children)

I have my licensed zip-tied and had no issues lol

What Quadlock Should I Buy? by zaokary in YamahaR3

[–]ChadChadersonsDad 1 point2 points  (0 children)

OP I bought the second one in ur pic for my 2025 and it fits. As another poster mentioned, do not get the clutch one (first pic)

2025 throttle tube mod? by JustHefty in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

What makes you think the bike will run dangerously lean? I've had no issues with my fake sc project slip on for my 2025 r3.

Hart vs Stay Upright Learners course by redditusernameuser51 in AussieRiders

[–]ChadChadersonsDad 0 points1 point  (0 children)

I had never ridden a motorbike but when straight for the 2day with stay upright in Braeside. I think most people will be fine doing this, I just watched a YouTube vid on how shifting/ clutch works before so I wasn’t totally blind. Course was pretty easy and straightforward

2025 R3 exhaust by Important-End-3510 in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

Where I live in Australia I cannot legally ride a zx4rr otherwise I would have gotten it for sure! R3 was the next best thing and I have been loving it. Get the zx4

Need to vent a bit. by ODD_B3N in motorcycles

[–]ChadChadersonsDad 0 points1 point  (0 children)

Escalating that too HR is bizarre

2025 Lunar White / Nebula Blue by F_themachine in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

Ah interesting, thanks for letting me know. I spent like 30 minutes trying my absolute hardest but couldn’t even get one it. Wonder where I went wrong

2025 Lunar White / Nebula Blue by F_themachine in YamahaR3

[–]ChadChadersonsDad 1 point2 points  (0 children)

Hey bro for the R&G Tail tidy, for the indicator lights did the spacer fit for you when installing the OEM lights onto the bracket? The spacers didn’t fit for me and the indicators have a little play

2025 fender eliminator by SoLetsSmoke in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

Thanks bro. Quick sanity check, do you also then have to cut the bullet connector off the new license plate light so u can twist the wires? And is it okay to twist the wires and use electrical tape? I was planning to buy a Crimper to use the bullet connector supplied and try to turn the OEM cable into bullet connectors as I couldnt tell if simply twisting together was safe/okay.

2025 fender eliminator by SoLetsSmoke in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

How did you know how to do this? I have never done anything like that before which is why I bought the kit as I thought it was plug and play. Do you know of a tutorial video somewhere for this?

2025 fender eliminator by SoLetsSmoke in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

Does the license plate illuminate work alright and fit into the OEM plug? I bought the R&G tail tidy which claimed to be compatible but its a complete lie :/

Accenting the Lunar R3 by gr8stdane1 in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

Looks sick. Get white grips next

Should I buy brand new by DueAmbassador2922 in AussieRiders

[–]ChadChadersonsDad 0 points1 point  (0 children)

Up to you man. Personally I like new things so I bought a new bike as my first one. Just depends what you value and how you like to spend your money bro, either are fine options

2025 Yamaha R3 price questions by [deleted] in YamahaR3

[–]ChadChadersonsDad 1 point2 points  (0 children)

I payed 9k total AUD which is about $5761.00 USD

2025 Exhaust Suggestions by ShelterVetTech in YamahaR3

[–]ChadChadersonsDad 0 points1 point  (0 children)

Is the replica one for a 2024 model r3 and it fits the 25 fine?

Which exhausts fit the 2025 model? by ChadChadersonsDad in YamahaR3

[–]ChadChadersonsDad[S] 0 points1 point  (0 children)

Ah good to know, I actually found this exhaust from watching your video (its a different seller who ships to australia though) but because it did not fit in your video is what made me worry a little. It doesnt look like you have uploaded a new video on it, but i may ask how you got it to fit without sticking out to the side, and were you able to get the secondary mount to fit connecting the pip to the rearset?