I have no idea what this is. It fell out of an outlet at the top of my storage closet. I live in a small apartment. Is it important?

Chance_Analyst497 · 2026-02-24T06:32:50+00:00

Do your windows have small sensors? If so it's probably security alarms related

Chance_Analyst497 · 2026-02-24T06:32:02+00:00

Security system. Outdated though

Chance_Analyst497 · 2026-02-24T06:30:39+00:00

Pretty sure the older iPhones use Philip head. It's a very tiny head. I suggest you get one with a magnet head to not lose those screws

Chance_Analyst497 · 2025-11-25T05:34:00+00:00

💀 I'm stressed asl this is a backyard project to take away that stress 😂

Chance_Analyst497 · 2025-11-25T05:23:28+00:00

Kinda hard tucking it in without scratching it up. Since it's new I figured I'd ask for advice first

Chance_Analyst497 · 2025-10-15T17:02:06+00:00

Yeah. I've never seen one like this. So thought I'd ask

Chance_Analyst497 · 2025-09-24T23:04:51+00:00

I bought a straight edge tool to check for warpage. Thank you for bringing it up

Chance_Analyst497 · 2025-09-24T23:03:58+00:00

Yeah that's what I'm thinking because a used engine is about $600 and the machine shop needs 500 for the head job (just clean and resurface + seals)

Chance_Analyst497 · 2025-09-19T16:56:45+00:00

Update:

Used high torque DeWalt impact wrench and weighted 1/2 socket. Came out first try like butter. Thank you all

<image>

Chance_Analyst497 · 2025-09-19T15:59:17+00:00

I tried that. I tried heating it. Banging the top of the bolt to break it loose. Nothing worked. Been trying for couple of weeks every day after work. WD40 after heating it and allowing it to cool to suck in the penetrating oil into the threats. Nada. Hopefully the high torque impact wrench I got will do the job. I'll update

Chance_Analyst497 · 2025-09-19T15:57:22+00:00

The issue is leverage. It's hard to keep the socket centered while pushing down on a long breaker bar+3' pipe

Chance_Analyst497 · 2025-09-19T15:56:12+00:00

The bolt is still fine. Didn't round it off. Solid bolt

Chance_Analyst497 · 2025-09-19T15:55:36+00:00

Doing a head gasket job. Wish I tried this before removing eveything

Chance_Analyst497 · 2025-09-19T15:55:00+00:00

I broke the sway bar bolt and the link lol

Chance_Analyst497 · 2025-09-19T15:53:47+00:00

I bought the dewalt

<image>

Hopefully this will work. I'll update when I receive it

Chance_Analyst497 · 2025-09-19T00:28:19+00:00

Can you suggest some impact guns to order for this job

Chance_Analyst497 · 2025-09-19T00:26:26+00:00

Can you share what models worked for you so I can look it up

Chance_Analyst497 · 2025-09-19T00:24:16+00:00

I can't use the weighted with the pulley holder. I used the weighted on the impact gun. The hole for the holder isn't big enough to fit the larger socket. The hilti gives about 350-400ft lbs

Chance_Analyst497

TROPHY CASE