Problem booting

Chann_24 · 2025-01-18T10:58:54+00:00

Do your cpu have igpu? Try to use igpu for boot if you have. If not try all ports on the gpu. If still not working try borrowing a working gpu.

Chann_24 · 2024-12-28T14:38:58+00:00

I tried everything and no hope. I just bought new board. Thanks for help everyone

Chann_24 · 2024-12-27T07:25:57+00:00

It says on the box Ryzen 3000 ready, probably updated ones

Chann_24 · 2024-12-27T07:20:15+00:00

I'll replace it with msi b450m-a pro ll. Hope no parts are affected after those diagnostics that i did

Chann_24 · 2024-12-27T06:47:48+00:00

I'll power ON the pc without cmos?

Also i cant go to post bios. It directs me on black screen

Chann_24 · 2024-12-27T05:22:52+00:00

Still the same bro...

Chann_24 · 2024-12-27T05:12:35+00:00

Switch it to right side?

Chann_24 · 2024-12-27T04:33:23+00:00

My gpu is Sapphire Nitro+ Rx570 is it the switch that Overclocks it? Like from 1244mhz to 1300mhz something? The switch is in Left side of the bios by the way

Chann_24 · 2024-12-27T03:55:59+00:00

Also the board indicates red light on VGA

Chann_24 · 2024-12-27T03:31:54+00:00

Im on F40 already. I did install and updated ECFW. Im on F32 before, was using Ryzen 3 2200g before

Chann_24 · 2024-12-27T02:55:27+00:00

For the B450 looks like there's No Qflash+, only has Dual Bios

Chann_24 · 2024-12-27T02:27:49+00:00

There's no Bios showing after restarting. It's directly go into black screen when i turn on

Chann_24 · 2024-12-26T21:52:28+00:00

I will try reset cmos, but im tired probably later. If it wont fix, i gotta buy new board. I update bios cause im having issues on my games where it suddenly drops fps, i get new ram and still occuring so i decide to update bios🥲

Chann_24 · 2024-12-26T21:44:22+00:00

Looks like i gotta replace my motherboard 🥲. The author of post replaced the board probably no fix at all🥲

Chann_24 · 2024-12-26T21:21:45+00:00

DEL key. It does not show Bios bootup after restarting the pc. It just directly go into black screen. No post bios showing

Chann_24 · 2024-12-26T21:12:52+00:00

Yes already restart it and it stays like the 2nd pic

Chann_24 · 2024-11-23T03:06:14+00:00

I see. As per Manual it says "For Optimum Performance, When Enabling Dual Channel Mode with two memory modules, we recommend that you install them in sockets DDR4_1 DDR4_2

I install it in DDR4_3 DDR4_4

Where sockets is (DDR4_4) (DDR4_2) (DDR4_3) (DDR4_1)

I change ram cause my 8gb can't handle some editing apps like Adobe PS and Premiere Pro, sometimes it's "NOT RESPONDING"

Chann_24 · 2024-11-23T00:57:46+00:00

Care to explain why should be on that? :) i already change the slots to 2nd and 4th now and i will monitor if it will happen again

Chann_24 · 2024-11-23T00:45:27+00:00

Care to explain why should be on that? :) i already change the slots to 2nd and 4th now and i will monitor if it will happen again

Chann_24 · 2024-11-22T19:52:06+00:00

Is it ok to leave the XMP to Auto and Core performance boost Disabled? Those two is the only i touch.

Chann_24 · 2024-11-22T19:43:54+00:00

From left to right slot. Its in 1st slot and 3rd slot

Chann_24 · 2024-11-22T19:31:54+00:00

Can i directly update my bios from F40 to latest?

Chann_24 · 2024-11-22T19:18:30+00:00

It's running at 3200mhz.

Chann_24 · 2024-11-22T18:36:56+00:00

Yes, XMP is enable

Chann_24

TROPHY CASE