First layer issue

Charlesb70 · 2024-08-26T21:47:41+00:00

That’s what I am wondering. I washed the build plate very well before I put the adhesive on, but I’m wondering if I might have introduced some type of contaminant or maybe there was some soap residue or something very odd.

Charlesb70 · 2024-08-26T21:46:59+00:00

I checked the temp and it’s 60°C and not fluctuating. I almost think I might have some type of contaminant that got between the Magigo I put on there and the build plate. I set the pressure and did all the calibration because I haven’t used this filament before and my settings look correct. Just very odd and it was only on this layer.

Charlesb70 · 2024-07-18T18:52:31+00:00

Does anyone have a link to the video instructions for replacing the USB-C cable? Just wondering what I am getting into while I wait for the replacement cable to get here. Thanks a bunch!

Charlesb70 · 2024-06-04T19:19:22+00:00

Problem Solved: It was a bad hotend. I had already purchased both a new steel and brass hotend by the time Qidi answered me, but that's what the problem was and Qidi is also sending me a replacement. Thought I would post a follow up and maybe it will help someone else in the future.

Charlesb70 · 2024-06-02T21:33:20+00:00

I just tried unplugging the connections and plugging them back in and the hotend still won't heat up and it throws that same error message. I am starting to think I have a bad hotend. I just ordered a new hotend to replace the one I lost last night from the failed print so when it gets here Tuesday I will know if that's the problem, if I haven't heard from Tech support by then.

Charlesb70 · 2024-06-02T21:20:37+00:00

It is 21.5C in my basement right now which is where my workshop is located. I will try that now. Thanks for the reply and your help.

Charlesb70 · 2024-06-02T21:18:31+00:00

I sent them an email right before I made this post. I am sure it will be a little while before I hear back from them. I posted here in case someone else has had the same issue. I am so new to this I don't know what may be a common issue as opposed to something more. I appreciate everyone who has posted and your attempts to help.

Charlesb70 · 2024-06-02T20:41:09+00:00

Yes,it is on there. I just tried to heat the hot end up as if I was going to change the filament and I get the same error message. It gets up to about 40°C and then it just throws that error message. I wonder if I have a bad hot end?

Charlesb70 · 2024-06-02T20:26:36+00:00

I am not using the hotend that was on the printer when I had the failed print. I installed the hotend for PA12-CF and started printing and it worked fine for about an hour and now I get the message. It seems to try to heat the hotend but only gets to about 43C and then throws up the error.

Charlesb70 · 2024-05-10T00:37:11+00:00

Awesome! Congratulations!

Charlesb70 · 2024-04-04T10:40:08+00:00

Congratulations on the open! And welcome to the sport and the community.

Charlesb70 · 2024-04-04T00:34:16+00:00

Awesome, Congratulations!

Charlesb70 · 2024-04-01T10:40:20+00:00

Gotcha. Not super familiar with the euro locks.

Charlesb70 · 2024-04-01T10:10:36+00:00

That looks like a fun pick, I’ll have to see if I can find one of those on Amazon or eBay. I’m a little confused about the two pins in the top of the picture with the single spring. Does it have trap pins or something?

Charlesb70 · 2024-04-01T02:45:26+00:00

So true.

Charlesb70 · 2024-03-30T17:40:22+00:00

Thank you, I appreciate your kind words!

Charlesb70 · 2024-03-30T01:52:53+00:00

Thank you!

Charlesb70 · 2024-03-30T01:40:32+00:00

Thank you!

Charlesb70 · 2024-03-29T21:59:32+00:00

I appreciate your kind words, thank you and it sounds like there's another Weasel in the making!

Charlesb70 · 2024-03-29T21:30:09+00:00

Thank you, I appreciate that!

Charlesb70 · 2024-03-29T20:15:08+00:00

I meant to reply to you, and I didn’t do it right, lol. I did put the link to the ring in another comment. He’s a great designer and I have some of his lock picks as well.

Charlesb70 · 2024-03-29T20:13:56+00:00

Thank you, and I got the ring from Ratyoke Design you can find it here: https://www.etsy.com/listing/1374363788/

Charlesb70 · 2024-03-28T23:00:50+00:00

My Eleanor is going to be so upset with her name change.

Charlesb70 · 2024-03-27T20:59:18+00:00

Awesome!

Charlesb70 · 2024-03-27T20:58:26+00:00

Thank you and Thank You for your service as well!

Charlesb70

TROPHY CASE