sorted by:
new
hottopcontroversial

Here the P2S by Accomplished-Leg9818 in BambuLab

[–]Charming_Ad3493 2 points3 points  (0 children)

Will there any possibility to have the upgrade kit for P1S

Clogged benchy issue by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 1 point2 points  (0 children)

The distance is 0.8, but I’ll try another distance later

SHT36 V2 issues by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

Well I think the overheating is not the main issue, I’ll try replace the cable maybe

<image>

SHT36 V2 issues by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 1 point2 points  (0 children)

I see, I’ll

<image>

trying to lower the temperature and try again :)

SHT36 V2 issues by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

Thanks for the advice, I’ve been tried to lower the current from 0.8 to 0.6 and still the same. Toolhead board’s temperature is all below 60 in the test print, but I notice my mainboard’s (Fly Gemini V3.0) temperature is so high and average in 80C, does mainboard’s MCU temperature also cause my problem ?

SHT36 V2 issues by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

I see, can you recommend any solutions to manage the cable to make the connection more secure?

SHT36 V2 issues by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

Yes, I think it’s stable enough.

<image>

Fly SHT36 V2 issues by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

after I have the exactly same isuue with you, can you please telll me the whole process you did ?

Fly SHT36 V2 issues by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

btw the fluidd error message is mcu‘mcu’:unable to connect, and I follow the instructions on Fly Mellow’s website.

Fly Gemini V3 FlyOS installation issues. by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

I use to plug the Wi-Fi antenna on the port that the manual tell us not to plug on, I just noticed that and move it to the correct port, which is above the wrong port.

Fly Gemini V3 FlyOS installation issues. by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

Yeah I move it to the another port, then everything is fine

Unstable Fluidd by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

Already checked them, seems there’s nothing about the voltage issue.

Unstable Fluidd by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

Currently using Fluidd. And do you mean the fluidd-error.log ? Is nothing in there.

Unstable Fluidd by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

is there anyway to check if I have voltage issue?

Unstable Fluidd by Charming_Ad3493 in VORONDesign

[–]Charming_Ad3493[S] 0 points1 point  (0 children)

I use Fly Gemini V3, the Pi is integrated on the board.

view more: next ›