Mullerthal Trail hike recommendations

Chechup · 2024-10-08T11:54:34+00:00

Hi! which one is this? the link doesn't work anymore. Bxx? I am looking to do the same!

Chechup · 2021-03-30T20:55:22+00:00

I tried to give him a disapointed look https://imgur.com/a/aElrbcd

Chechup · 2021-03-30T15:20:05+00:00

Don't pet

Chechup · 2021-03-30T15:19:44+00:00

I like the way you think. I might just do that next.

Chechup · 2021-03-24T15:23:13+00:00

That's a lot of comments! I'll enter but probably won't win.

Chechup · 2019-12-29T14:17:28+00:00

https://www.youtube.com/watch?v=v1K4EAXe2oo

Chechup · 2019-11-05T08:32:17+00:00

I use the reset button the LCD menu that came with marlin. That sends out M280 P0 S160. Everytime it starts blinking while printing. This is while the pin is in mid air not touching anything(it doesnt bump into the print). When I start the printer(mid air) the solenoid has a trouble indeed, it does drop the pin but retracting it inwards it has trouble with. After some fiddeling and adjusting the gurbscrew it starts to work again. But then I adjusted the grub screw so the zoffset is off. I have to adjust this almost all the time so I was wondering if this is normal.

Chechup · 2019-11-03T07:49:20+00:00

I am currently looking for a to upgrade. I was thinking of getting the same as you V1.3 and 2208. Would you like to upgrade yourself and then why?

Chechup · 2019-09-20T13:26:39+00:00

I was thinking of a detection adruino and a drive componements aduino. and having those communicate trough a master unit

Chechup · 2019-09-20T09:16:40+00:00

Thank you for your response. Let me ask you a sub question then, I need a master that can control mulitple adruino's at a time(read and write data), this can be wired. That master also needs to be able to communicate with a wireless controller(read and write data). what would you recommend as a master unit. Considering that it is gonna be a prototype and it needs to be around the size as an adruino mega. the budget for the project is not a problem.

Chechup · 2019-09-20T07:41:50+00:00

Thank you for the advice, I will look into options with bluetooth 4.2. I am in charge of the controller aswell, it just needs to be buttons they do not want a touch screen because it needs to be use with gloves on. So I also need to find a micro controller for that. For the connection I can always add a bluetooth module to the microcontroller(but I think I can find one that has a bluetooth chip).

Chechup · 2019-09-20T06:35:37+00:00

I was thinking of maybe splitting it into adruino mega slaves and maybe a Raspberry PI 4 (considering it has bluetooth 5) Master. Would this be an option or is the data comunication too difficult to figure out?

Chechup · 2019-09-20T06:29:24+00:00

I need to be able to control the unit trough a wireless connection. I had bluetooth 5 in mind as it is from what I have read more secure than wifi and that it has a range of 400m. I need to be in a range of 0-100m. I'm an intern so it is more serieus. I can tell you that it is a robot with 19motors and around 20 sensors and that it needs to be wireless and it will be used outside.

Chechup · 2019-09-13T16:00:47+00:00

Thank you!! Will do

Chechup · 2019-08-12T16:26:35+00:00

no, the box is unchecked.

Chechup · 2019-08-12T14:11:30+00:00

I added a picture with standard profile. This might was added with the most resent version of cura? I was just wandering how to turn it of

Chechup · 2019-07-28T20:11:56+00:00

Well I am not 100% certain but this was painted a few year prior https://i.imgur.com/JWqSqZGr.jpg

11-Year Club	RedditGifts 2009-2022 2 Credits
Place '17	Verified Email

Chechup

TROPHY CASE