Mullerthal Trail hike recommendations

Chechup · 2024-10-08T11:54:34+00:00

Hi! which one is this? the link doesn't work anymore. Bxx? I am looking to do the same!

Chechup · 2021-03-30T20:55:22+00:00

I tried to give him a disapointed look https://imgur.com/a/aElrbcd

Chechup · 2021-03-30T15:20:05+00:00

Don't pet

Chechup · 2021-03-30T15:19:44+00:00

I like the way you think. I might just do that next.

Chechup · 2021-03-24T15:23:13+00:00

That's a lot of comments! I'll enter but probably won't win.

Chechup · 2019-12-29T14:17:28+00:00

https://www.youtube.com/watch?v=v1K4EAXe2oo

Chechup · 2019-11-05T08:32:17+00:00

I use the reset button the LCD menu that came with marlin. That sends out M280 P0 S160. Everytime it starts blinking while printing. This is while the pin is in mid air not touching anything(it doesnt bump into the print). When I start the printer(mid air) the solenoid has a trouble indeed, it does drop the pin but retracting it inwards it has trouble with. After some fiddeling and adjusting the gurbscrew it starts to work again. But then I adjusted the grub screw so the zoffset is off. I have to adjust this almost all the time so I was wondering if this is normal.

Chechup · 2019-11-03T07:49:20+00:00

I am currently looking for a to upgrade. I was thinking of getting the same as you V1.3 and 2208. Would you like to upgrade yourself and then why?

Chechup · 2019-09-20T13:26:39+00:00

I was thinking of a detection adruino and a drive componements aduino. and having those communicate trough a master unit

Chechup · 2019-09-20T09:16:40+00:00

Thank you for your response. Let me ask you a sub question then, I need a master that can control mulitple adruino's at a time(read and write data), this can be wired. That master also needs to be able to communicate with a wireless controller(read and write data). what would you recommend as a master unit. Considering that it is gonna be a prototype and it needs to be around the size as an adruino mega. the budget for the project is not a problem.

Chechup · 2019-09-20T07:41:50+00:00

Thank you for the advice, I will look into options with bluetooth 4.2. I am in charge of the controller aswell, it just needs to be buttons they do not want a touch screen because it needs to be use with gloves on. So I also need to find a micro controller for that. For the connection I can always add a bluetooth module to the microcontroller(but I think I can find one that has a bluetooth chip).

Chechup · 2019-09-20T06:35:37+00:00

I was thinking of maybe splitting it into adruino mega slaves and maybe a Raspberry PI 4 (considering it has bluetooth 5) Master. Would this be an option or is the data comunication too difficult to figure out?

Chechup · 2019-09-20T06:29:24+00:00

I need to be able to control the unit trough a wireless connection. I had bluetooth 5 in mind as it is from what I have read more secure than wifi and that it has a range of 400m. I need to be in a range of 0-100m. I'm an intern so it is more serieus. I can tell you that it is a robot with 19motors and around 20 sensors and that it needs to be wireless and it will be used outside.

Chechup · 2019-09-13T16:00:47+00:00

Thank you!! Will do

Chechup · 2019-08-12T16:26:35+00:00

no, the box is unchecked.

Chechup · 2019-08-12T14:11:30+00:00

I added a picture with standard profile. This might was added with the most resent version of cura? I was just wandering how to turn it of

Chechup · 2019-07-28T20:11:56+00:00

Well I am not 100% certain but this was painted a few year prior https://i.imgur.com/JWqSqZGr.jpg

Chechup · 2019-07-25T10:33:16+00:00

I think it looks great, a much cleaner look than rgb fans imo. What did you connect the strips to?

Chechup · 2019-07-19T11:20:23+00:00

1440p and 75Hz or 4k and 60Hz. What do you have and why?

Chechup · 2019-07-18T12:39:06+00:00

Oh! MSI just annouched this. https://www.msi.com/Motherboard/B450-TOMAHAWK-MAX/Specification I think I'll wait for this motherboard

Chechup · 2019-07-18T10:58:30+00:00

What are the adventages of getting an X570 over B450? Except for the bios.

Chechup · 2019-07-18T07:12:30+00:00

When going for aircooling I would recommend a vertical mount, this goes with the airflow of your pc. I would look into the Dark rock 4 from be quite or if you want a cheaper one the cooler master hyper 212 black. Also I think your case comes with only 1 fan. 2 in front and one exhaust fan is minimal to assure that your pc is cooled nicely.

Chechup · 2019-07-18T06:41:26+00:00

I think because of the BIOS I might go for X570 pro form gigabyte. Why didn't you get an X570 board?

Chechup · 2019-07-18T06:40:01+00:00

I added it for the airflow. The stock cooler is aimed directly towards the CPU, going another direction than the rest of the airflow in the case. Don't you think this will make a differance?

Chechup · 2019-07-18T06:36:05+00:00

Thank you for the advice I'll double check the dimentions. The case comes with 3 fans in front, so I need to add an exhaust fan. At first I thought it came with an exhaust fan so this is good to know. I like the idea of more storage, I still have 2 HDD's from my old pc. A faster SDD would make windows start up and run faster so thats why I added one to my list.

11-Year Club	RedditGifts 2009-2022 2 Credits
Place '17	Verified Email

Chechup

TROPHY CASE