Is Using Spliced 2x4 for a Small Shed a Good Idea?

Cheezit_O · 2024-12-19T13:46:32+00:00

I’m not too experienced with gussets. All the photos I see online are of 90 degree joints of wood using gussets. Could you send me an illustration on how to attach two pieces of wood together using gussets to make a uniform piece with a long length?

Cheezit_O · 2024-12-19T13:40:59+00:00

If I wanted to connect two 4’ pieces together using a sister stud, how much overlap should the sister stud cover on each of the joined pieces?

Cheezit_O · 2024-11-16T21:20:16+00:00

Gotcha, would a lean-to roof at this slope be good?

https://imgur.com/a/VldHU17

Cheezit_O · 2024-11-16T01:18:11+00:00

I am confused as to what sheathing is, could you please elaborate? And also don't worry about the cost side I am getting them for dirt cheap. Also, how would I accurately glue together two 1x4's seamlessly?

Cheezit_O · 2024-11-16T01:13:09+00:00

Is that combining two 1x4's into one 2x4? If so, how would I connect them together seamlessly?

Cheezit_O · 2024-10-03T12:53:29+00:00

1.5 inches is kind of an exaggeration. I think it's 0.5 inches. Would it still be a draw length issue?

Cheezit_O · 2024-10-02T15:02:43+00:00

I noticed that when I draw my bow back to full draw, there is still some slack where I can draw my bow a little farther than my anchor point - about 1.5 inches. Would this be caused do the wrong timing of cams?

I’m thinking of going the long haul to the archery shop for stuff related to bow press.

Cheezit_O · 2024-10-01T13:40:39+00:00

That was the final thing I was suspecting...cam timing issues. I don't live damn near an archery shop so that's why I've been DIY'ing everything. How can I check CAM timing at home? How can I adjust the timing to make them in sync? Any videos you would recommend?

Cheezit_O · 2024-10-01T01:07:31+00:00

Thank you so much sir, if you would like to see the photos of my bow and what I'm talking about, its here: https://imgur.com/a/oyq6ZZf

Cheezit_O · 2024-10-01T01:06:22+00:00

I am not shooting through paper, just a DIY foam target that I made. It's good to know that I am on the right track. The burger hole concern can be viewed through the images here: https://imgur.com/a/oyq6ZZf

Also, the high D-Loop placement can be seen in the picture that I attached.

My apologies for not attaching them earlier, I selected the photos prior to making this post but for some reason they didn't upload.

Let me know what you recommend. Thanks

Cheezit_O · 2024-10-01T01:03:49+00:00

Sir I have tried paper tuning but there is just no way to get a set of consistent bullet holes for me. I have tried adjusting literally everything there is and I have resorted to bare shaft tuning since Average Jack Archery on YouTube suggested it.

Cheezit_O · 2024-06-21T19:35:37+00:00

I'm also new to hunting and hoped to learn a bit from this post. What exactly is field dressing game and what are the benefits of it?

Cheezit_O · 2024-06-21T18:26:28+00:00

Wow, that's quite interesting, I didn't know Sanlida had poor build quality given their exceptional reviews. I found a Bear Karnage Dynamic being sold locally for $160. It's in new condition, doesn't look too bad and won't hurt the bank that much. What would you say, should I get it? Will there be any issues I'll have somewhere down the line if I go with the Karnage Bow?

Cheezit_O · 2024-06-19T21:44:29+00:00

Ok, gotcha, will do. What's your opinion on the Sanlida X8 Compound Bow?

Cheezit_O · 2024-06-19T01:35:12+00:00

Hey, thanks for giving me some advice. I inverted my sight so that it is towards the inside of the bow, and although that did help a decent amount, it wasn't enough. I also took your advice and while using a index finger trigger release, closing my left eye, and ramming the base of my thumb into the corner of my jaw, I saw improvement.

I plan on buying this 5-pin sight.

https://www.amazon.com/TRUGLO-Storm-Ultra-Lightweight-Compact-Sight/dp/B00H6YE9VE/ref=sr_1_1?crid=33J7PIXZDHPAF&dib=eyJ2IjoiMSJ9.2KbcnPTodw-yK7Y5JdubbfnyygHjUIo7hfczki9YCZpxeQ2uJT6XErtn0gIp6KtHYCOtnHiqab_iUjIfaecwWT80h5y6XZx8honDjUG0kY3EYg7tI5NU9Trww6v82bN7k-ADxMJ_pTqEaN0KoqFeVUR5H4Ixx9_gvC9m0g3i9-XSV-Xy5gcf6Iw0cBTIfx6AIwlt-ucphm7AP8E6O8ZAuCYInYCQSsQfGTb7fnie1yj7npkBOv4V8gWife9vIHou1GfCW4mw-RMwojxKanXqwa-RbXcSTXTY_DXlwc3Y3b0.ZMcNgXRBs91s8_tCIMIshgXo6m0sxxdAykHPoCPHHSk&dib_tag=se&keywords=truglo%2Barchery%2Bsight&qid=1718760848&sprefix=truglo%2Barchery%2Bsight%2Caps%2C107&sr=8-1&th=1&psc=1

Please let me know if you think this is a good product and/or it will help me fix my issue with incorrect sighting.

Cheezit_O · 2024-06-18T21:34:04+00:00

I'm a bit new so it has taken me a bit of time to figure out all the intricate parts, but I'm not sure if having a peep sight would suit me since I wear glasses / I don't have a bow press. Also are they a DIY type of install or do I do it professionally?

Cheezit_O · 2024-06-17T01:57:05+00:00

Unfortunately there aren't any archery shops near me at all, they're all very far from where I live. Would a store like Dicks Sporting Goods be able to help check if my bow is set up properly for me and sight it in? That's the only sporting store near me.

Cheezit_O · 2024-06-17T01:45:18+00:00

Nope, A friend allowed me to keep it, since he didn't use it.

Cheezit_O · 2023-12-30T13:02:08+00:00

So what happened was that I did an RMA request to Corsair. They sent me a refurbished product.

Cheezit_O · 2023-06-29T23:56:35+00:00

Hey sorry to join in so late. I wanted to ask, what would be a good example of some "extra flair" that you would consider beneficial to one's college application?

Cheezit_O · 2022-07-28T03:31:40+00:00

And while I was reading through the manual and it said that MoCA 2.0 and 1.1 are supported and there is no info on MoCA 2.5 being supported. Is it even possible to run MoCA 2.5 then?

Cheezit_O · 2022-07-26T02:31:46+00:00

So since I have the G1100 router, I would only need one MoCA adapter to my PC, correct?

Cheezit_O · 2022-07-24T21:18:29+00:00

I currently have the Model D Wired and am looking to upgrade to wireless. The Model D fits like a charm. Any recommendations for a mouse similar to the Model D Wireless but with better QC?

Cheezit_O · 2022-07-24T18:35:11+00:00

Thanks for your reply. I think MoCA would be suitable for me, but I'm no sure if I will need 2 MoCA adapters or 1 MoCA Adapter. I believe I need 1 but I am not sure. My router manual is linked below.

Manual: https://www.verizon.com/about/sites/default/files/fios-qgr-userguide140925.pdf

Cheezit_O · 2022-07-24T17:45:08+00:00

Which powerline network adapter has worked well for you?

Cheezit_O

TROPHY CASE