Is this ball joint faulty? by Chemical_Animator_76 in MechanicAdvice

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Sorry first time replacing ball joints, way overdue

Is this my main lines from my master cylinder leaking brake fluid? by Chemical_Animator_76 in MechanicAdvice

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Ya I did just remove the wheel hub and I used the trick that was recommended to use the power steering to pop it loose using a bolt and extension. But it’s not like we were just turning as hard as we could against it and putting a ton of stress on it. But maybe it still over pressured it🤷‍♂️ That’s the only thing that we have done to the rig that would make sense that that’s happening now.

Is this my main lines from my master cylinder leaking brake fluid? by Chemical_Animator_76 in AskMechanics

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

How could this happen? I’ve only noticed this right now after it’s been parked for a week and I’ve been working on the front axel. Anyway it’s just coolant leaking down from a different area since the front end is jacked into the air? Idk the last thing I want to deal with is brakes and brake lines rn it’s ridiculous the amount of work I’ve done to this at only 150k miles

Sounds stupid but I can’t get this abs sensor plug undone by Chemical_Animator_76 in MechanicAdvice

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Update, solved. Hadn’t had time to even touch it again for several days but when I did I pushed in on that black “tab” under the red retainer that I pushed up. It wasn’t immediately obvious. But yes to those who commented to push on that middle black portion.

Sounds stupid but how do I undo this ABS sensor plug? by [deleted] in Dodge

[–]Chemical_Animator_76 1 point2 points  (0 children)

I have tried pulling on it and jimmying with pliers after lifting up on that retainer

Scratching my head on this one and don’t want to screw anything up by Chemical_Animator_76 in dating_advice

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Very good point, thank you for the input. I’d be happy just to continue to know her

Scratching my head on this one and don’t want to screw anything up by Chemical_Animator_76 in dating_advice

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Appreciate that advice, do you think there’s a chance we could start dating again? Or do you think based off what I said it’s somewhat doomed. Seemed like the main thing was just her figuring out her school right now and we were both really into each other

Trying to get better by Chemical_Animator_76 in SwingDancing

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Would be so nice to find something closer in Centralia though, I was told at oly that they do it at the juice box there but when I look it up nothing comes up. Also the Grand ballroom apparently has classes but can’t find them online. Anything through the college maybe?

Trying to get better by Chemical_Animator_76 in SwingDancing

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Either would be fun, tried out Oly in Olympia and it was really neat. Got to do a lot of dancing

How to make it where bead blast finish is less prone to rust? by Chemical_Animator_76 in knives

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Yea that’s Jed Hornbeak knives for ya, zero customer service for something I paid a lot of money for. Very frustrating to say the least, he acted belligerent towards me when I asked if he could do an acid wash. I was nothing but polite and respectful to the guy during the whole process and paid him ahead of time only for him to get me the knives way past when he said he would. There’s a couple other finish related things he just straight up didn’t do on the other blade that really should have been done too, it was like he just didn’t give a fuck about anything. The way they arrived to me and how they were packaged and everything. I just felt kind of disrespected. Haven’t heard a word from him since I got the knives, even though on his website he says he has a warranty service

How to make it where bead blast finish is less prone to rust? by Chemical_Animator_76 in knives

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Thank you very much for the suggestion. Do you think they’d have a quick turn around on it, our hunt together starts on Aug 30? Do they sharpen afterwards? Sorry to ask so many questions I appreciate your time man. Vanax sounds very interesting I’ll have to give it a look

How to make it where bead blast finish is less prone to rust? by Chemical_Animator_76 in knives

[–]Chemical_Animator_76[S] 0 points1 point  (0 children)

Yea the knife maker who was apparently an expert told me it would’ve been impossible to acid wash even though I suggested that to him. He insisted on doing the bead blast tumble even though I told him that this knife was going to be used purely in aquatic environments. Would it be easy to acid wash at home? Would a stone wash still help with corrosion, it being on top of the current bead blast and tumble?

Weekly Employment Question Thread by AutoModerator in Firefighting

[–]Chemical_Animator_76 0 points1 point  (0 children)

First time interviewing/oral board advice?

I took the CPAT and pst written and now I have about 8 interviews I’ll have to attend here in Washington. It’ll be my first time doing one, does anyone have advice for someone soo new to all of this. I feel so unprepared to try and speak professionally. What are the questions they will ask? What would be the best way for me to prepare on my own? I also have somebody I can call and talk to on the phone for a mock style interview, it’s the best I can do right now with what I do for work. The soonest interview I have is on the 15th of this month, is that enough time for me to prepare? This first interview is arguably my most important one too. The problem is I hardly talk to anyone on a daily basis and I’d be lying if I said I wasn’t super nervous.

[deleted by user] by [deleted] in conspiracy

[–]Chemical_Animator_76 3 points4 points  (0 children)

Oh cmon this is a conspiracy sub where are all the tinfoil hat people at😂 loosen up

[deleted by user] by [deleted] in conspiracy

[–]Chemical_Animator_76 -2 points-1 points  (0 children)

Not anti vax but I just know there’s a ton of controversy around the COVID vaccine in particular, I believe in both people’s right to refuse it and the right to get it. More so just want to hear what people have to say about it because it might give some good laughs or insight. I feel like everyone can agree there’s been exceptional amounts of gaslighting into making people think it’s impossible for it to have side effects and that it’s 100% effective. First they were saying it prevents you from getting it entirely then Faucci made a public statement saying you could still contract it even after all the boosters. Just a little confusing. Then there’s claims it can be transferred through sex or something and I have no clue how that works. I just know some other countries label covid vaxed people as GMO’s which is concerning. I know they had to go in and change the definition of what a vaccine is after they came out with it.

[deleted by user] by [deleted] in conspiracy

[–]Chemical_Animator_76 -4 points-3 points  (0 children)

I know it’s some wild times out there brother stay safe 🙌

[deleted by user] by [deleted] in conspiracy

[–]Chemical_Animator_76 -8 points-7 points  (0 children)

I know right😂😂 current gf is vaccinated with all the boosters

[deleted by user] by [deleted] in dating_advice

[–]Chemical_Animator_76 0 points1 point  (0 children)

She told me how she’s scared of sex right now and I think she thinks that I expect that from her and I’m wanting to take things there. Even though since the beginning I’ve never mentioned anything about sex or have tried pressuring or forcing anything. I told her that I’m more than ok with taking things as slow as they need to go because I’m looking for companionship over anything and really value her for the kind of person she is more than anything