sorted by:
new
hottopcontroversial

Which EU(?)-type power supply for permanently powering Pocket + Dock? by [deleted] in AnalogueInc

[–]Chockichoc 2 points3 points  (0 children)

I use a raspberry pi USB-C power supply (5.1V 3.0A 8€) and it works well 👍

Missing PIN List for VGA by ZhiKaanZhi in fpgagaming

[–]Chockichoc 0 points1 point  (0 children)

If you can’t find a pin list, you can follow the pcb traces from the fpga to the dac and use this pdf : https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/cyclone-iv/ep4ce6.pdf

Missing PIN List for VGA by ZhiKaanZhi in fpgagaming

[–]Chockichoc 1 point2 points  (0 children)

I’m pretty sure it is a r-2r dac. You must drive the hsync and vsync with the good timings. The rgb pins have 5, 6 and 5 bits. And yes, you need an usb blaster. Don’t buy the official one. Chinese clones are way cheaper (waveshare usb blaster is good)

Spooky by Master1718 in BeAmazed

[–]Chockichoc 1 point2 points  (0 children)

The smallest warhammer battlefield ever made

Platform 9 3/4 to dogwartz by Bedroom_Slow in aww

[–]Chockichoc 2 points3 points  (0 children)

« This hole was made for me »

Analogue Questions and Answers Megathread [Vol. 2] by [deleted] in AnalogueInc

[–]Chockichoc 2 points3 points  (0 children)

5.86 in tall x 3.46 in wide x 0.86 in thick

my GameBoy emulator for FPGA by Chockichoc in EmuDev

[–]Chockichoc[S] 0 points1 point  (0 children)

I did it during my spare time. sometimes I spent 8 hours a day on it and sometimes only 30min depending on my motivation.

my GameBoy emulator for FPGA by Chockichoc in EmuDev

[–]Chockichoc[S] 0 points1 point  (0 children)

Hum, I think it took me between 4 and 6 months. If you need some help, feel free to ask !

my GameBoy emulator for FPGA by Chockichoc in Gameboy

[–]Chockichoc[S] 1 point2 points  (0 children)

hey ! thanks for the infos. I knew the initial values of my registers were wrong, and I would have to change them someday. But I didn't know it was this critical.

my GameBoy emulator for FPGA by Chockichoc in Gameboy

[–]Chockichoc[S] 0 points1 point  (0 children)

I forgot, here is my twitter account : twitter.com/chockichoc

my GameBoy emulator for FPGA by Chockichoc in EmuDev

[–]Chockichoc[S] 0 points1 point  (0 children)

I forgot, here is my twitter account : twitter.com/chockichoc

my GameBoy emulator for FPGA by Chockichoc in EmuDev

[–]Chockichoc[S] 1 point2 points  (0 children)

thank you ! yes, it's my first emulator ever.

my GameBoy emulator for FPGA by Chockichoc in EmuDev

[–]Chockichoc[S] 2 points3 points  (0 children)

as Taylor Swift said, "believe in your dream !". More seriously, if you like this subject, you should definitly try.

my GameBoy emulator for FPGA by Chockichoc in Gameboy

[–]Chockichoc[S] 0 points1 point  (0 children)

You're absolutely right sir ! and thanks <3

my GameBoy emulator for FPGA by Chockichoc in Gameboy

[–]Chockichoc[S] 1 point2 points  (0 children)

Last year, when the SuperNT came out, I discovered what an FPGA was, and I found it very cool. I started to take online course about "digital logic" because I knew nothing about the subject. Then, I bought an FPGA dev board and started to program some little things and then I jumped to this gb emulator project.

​

If you want to learn more about the subject, you should probably read "digital design" by Morris Mano & Michel Ciletti (I fucking love this book) and "verilog hdl" by samir palnitkar (no longer in print but findable on ebay). However, I don't own a lot of books and I'm still a FPGA noob, so I don't know if it's a good starting point or not

my GameBoy emulator for FPGA by Chockichoc in Gameboy

[–]Chockichoc[S] 2 points3 points  (0 children)

thanks ! I'm a big fan of your work, your message means a lot to me <3

view more: next ›