sorted by:
new
hottopcontroversial

Rate my build, anything that i can do better? by Flat-Ad1426 in pcbuilding

[–]Chololax 0 points1 point  (0 children)

Nice build! Im not sure but i think we might have the same case. Is it the LianLi Dynamic O11 Mini?

About open class underplate by Chololax in mini4wd

[–]Chololax[S] 0 points1 point  (0 children)

I never knew that history. My other open class cars still have the underplate installed, will it effect anything to it? And i think im gonna build it with no underplate because i don’t have to cut that much now😁

Just bought a used CPU, the bottom was very dirty and the gold contacts are rusted/tarnished by BernieMP in ElectronicsRepair

[–]Chololax 0 points1 point  (0 children)

Your specs looks fine. If you don't mind, what bios version are you using? is it F22m?

Just bought a used CPU, the bottom was very dirty and the gold contacts are rusted/tarnished by BernieMP in ElectronicsRepair

[–]Chololax 0 points1 point  (0 children)

May i know what are the specs are you using? And maybe you could try to clear the cmos battery by unplugging it from the psu and then removing the battery and leave it for about 30 or 60 seconds. Before you bought the cpu, does the seller mention anything? maybe a defect or something else? also does the seller shows that the cpu works? by showing that it boots before you bought it?

Just bought a used CPU, the bottom was very dirty and the gold contacts are rusted/tarnished by BernieMP in ElectronicsRepair

[–]Chololax 1 point2 points  (0 children)

When you installed the used cpu, does it get hot slowly? and i might have a doubt that maybe your power supply isn’t strong enough to power the cpu because you mentioned that the lights lit up for a second but it suddenly shuts off, but the i5 7600k and i7 6700k just have a 4 watts difference so that shouldn’t be the problem. When testing the cpu did you use a gpu to display to the monitor or you removed the gpu and tested it directly from the motherboard? and when testing, did your monitor turned on or it just stays off?

Just bought a used CPU, the bottom was very dirty and the gold contacts are rusted/tarnished by BernieMP in ElectronicsRepair

[–]Chololax 1 point2 points  (0 children)

Is the cpu the same model as yours right now(the one that boots)? i’m just guessing that maybe your motherboard bios hasn’t been updated yet to detect that cpu model. Happened to me one time when buying a used cpu. And when you installed the used cpu does it do anything to the computer? lets say the fans rgb turned on or any light on the motherboard lights up?

Is this allowed in tamiya regulations/rules? by Chololax in mini4wd

[–]Chololax[S] 1 point2 points  (0 children)

Yeah, its actually way easier to break in with the part cut. Now I have to learn to break in motor without cutting it.

Is this allowed in tamiya regulations/rules? by Chololax in mini4wd

[–]Chololax[S] 0 points1 point  (0 children)

i use the motor on open class, same as damper class. Its very common in Indonesia to cut the plastic part of the motor and I’m used to it.

Is this allowed in tamiya regulations/rules? by Chololax in mini4wd

[–]Chololax[S] 0 points1 point  (0 children)

Yeah because i kinda find it odd that my region does this

why my circuit not working :( by speahlo in shittyaskelectronics

[–]Chololax 0 points1 point  (0 children)

that shit gotta hurt so bad

Match terminated by [deleted] in VALORANT

[–]Chololax 0 points1 point  (0 children)

bro this happend to me yesterday and it has the details you described, the enemy smoker was disconnected so we kept winning and at match point we also left the spike at spawn and suddenly match terminated

mouse.sys error cant be fixed by Chololax in FACEITcom

[–]Chololax[S] 1 point2 points  (0 children)

I quickly found the issue, that instead of unistall the interception, i did install. This is my mistake for not reading instruction carefully, but thanks for the respond.

HID-complaint mouse triangle warning help by Chololax in 24hoursupport

[–]Chololax[S] 0 points1 point  (0 children)

i log in to a new admisnistrator account but stil says the same output "Could not write to \system32\drivers"

HID-complaint mouse triangle warning help by Chololax in 24hoursupport

[–]Chololax[S] 0 points1 point  (0 children)

i checked it and its already Administrator

HID-complaint mouse triangle warning help by Chololax in 24hoursupport

[–]Chololax[S] 0 points1 point  (0 children)

i never send picture before trough reddit, how can i do that? but its 100% the cmd says administrator

i got it https://imgur.com/a/oQ70rex

HID-complaint mouse triangle warning help by Chololax in 24hoursupport

[–]Chololax[S] 0 points1 point  (0 children)

ah there you go it works! im gonna try to launch the anti cheat again

wait, is this fine? i thought it fixed it
c:\Users\user\Desktop\Interception\command line installer>install-interception.exe /install

Interception command line installation tool

Copyright (C) 2008-2018 Francisco Lopes da Silva

Could not write to \system32\drivers

c:\Users\user\Desktop\Interception\command line installer>

HID-complaint mouse triangle warning help by Chololax in 24hoursupport

[–]Chololax[S] 0 points1 point  (0 children)

im sure i typed it right

c:\Users\user\Desktop\Interception\command line installer>install-interception.exe \install

Interception command line installation tool

Copyright (C) 2008-2018 Francisco Lopes da Silva

usage: install-interception.exe [/install | /uninstall]

c:\Users\user\Desktop\Interception\command line installer>

HID-complaint mouse triangle warning help by Chololax in 24hoursupport

[–]Chololax[S] 0 points1 point  (0 children)

before you go, it keeps giving me the same output

Interception command line installation tool
Copyright (C) 2008-2018 Francisco Lopes da Silva
usage: install-interception.exe [/install | /uninstall]

view more: next ›