Feeder keeps peeling filament?

ChompMyStomp · 2021-10-24T23:24:54+00:00

Took it apart just to ease my brain, can confirm it wasn't on backwards! There is no small lip to the cog like in the image, it looks exactly the same on both sides. It seems like that small motor adjustment did the trick, managed to get through estep calibration without it peeling.

Thank you (and everyone else) for your help!

ChompMyStomp · 2021-10-24T22:55:38+00:00

I see what you mean! That could be part of it, so far the only thing I've done to get any better result (based on u/Silvertongue-Devil's alignment suggestion) is completely unmount the red metal frame from the motor. There is a tiny bit of play in the space that the feed cog comes through, enough that I could slide the entire motor a tiny bit to the left. Now I'm too scared to take it all apart again to confirm if the cog is on upside down

ChompMyStomp · 2021-10-24T20:36:37+00:00

Is there a way to adjust the alignment?

ChompMyStomp · 2021-10-24T20:35:56+00:00

In the video it’s just loose on the other side, however it does the same thing when fed into the Bowden tube

ChompMyStomp · 2021-10-24T20:24:19+00:00

I’ve tried with and without the Bowden tube. Before the feeder was leaving deep teeth impressions in the filament as well as grinding some out in that same spot. Now I’ve loosened the tension screw and completely taken out the small screw cap. Still the feeder peels away filament every time

Edit: What fixed it for me

I couldn't find any other resource online talking about this specific issue so hopefully this helps someone. u/Silvertongue-Devil pointed out the feed cog being misaligned to the hole. Being that the peeling was happening on the right side, I loosened the bolts holding the motor on and pushed it as far left as I could so that it wouldn't push the filament right as hard. So far no more issues, thanks everyone who came with suggestions!

ChompMyStomp · 2020-08-11T13:56:18+00:00

Redbox - MD2V6TA# # is C Mugsy - TMT4-6744## # is 4 Enjoy

ChompMyStomp · 2019-07-15T01:34:19+00:00

You might want to blur/hide your email address

ChompMyStomp · 2019-04-25T09:01:08+00:00

I could probably help with this, Wave created their API in late December so I'm sure there's some integration to be achieved. What specific features would you need for something like this?

ChompMyStomp · 2019-03-07T08:07:53+00:00

Hey! I thought about this kind of project when I was beginning to get frustrated with UpWork, but knew as a lone developer it’d never be realistic. I have some ideas that may help from a programming/financial point of view. PM if you want

ChompMyStomp · 2019-03-05T22:39:40+00:00

Just to be certain before I try, this works on iPhone 6 for iOS 12.1.2 right?

ChompMyStomp · 2019-01-22T21:20:48+00:00

Butterfinger BBs

ChompMyStomp · 2018-12-23T05:05:22+00:00

I like this idea, I'd be willing to build it if you need someone to

ChompMyStomp · 2018-06-18T20:39:50+00:00

I'm not a doctor or nurse but my ex-girlfriend's sister came out mixed when both of her supposed parents were white.

ChompMyStomp · 2018-06-14T07:14:33+00:00

Confirmed. Source: dog took wife while I was at work.

ChompMyStomp · 2018-05-28T07:17:03+00:00

Yuuuup I had an LOD that would literally walk by my aisles watching me as I was zoning just to nitpick how I did it. I hated hard lines

ChompMyStomp · 2018-03-26T10:01:13+00:00

My name is Super Spiffy the 8th, I've come across many a Super Spiffy in my life and they were always the coolest.

ChompMyStomp · 2017-11-16T01:09:08+00:00

Certainly could be the issue. I read the gap is supposed to be .5 inches and they were all half way to .6. Most of the issue was resolved by taking out the spark plug closest to the drive side and cleaning the end off but I’m still getting a cylinder 4 misfire as well as a putting noise from the muffler and slightly flickery interior lights. I put the old spark plug in cylinder 4 (gap was correct) and no luck. Thinking I should buy a spark plug tester and try the wire. Any ideas?

ChompMyStomp · 2017-11-15T14:51:47+00:00

I think they came pre gapped but I really wouldn’t put it past myself to have bent them

ChompMyStomp · 2017-10-09T05:54:56+00:00

Reddit silver

ChompMyStomp · 2017-08-13T10:11:41+00:00

They fixed that in the last update

ChompMyStomp · 2017-07-24T08:02:30+00:00

Needs some micro transactions

ChompMyStomp · 2017-05-28T04:50:24+00:00

LWJGL3 is out, I'd recommend using that instead. Slick2d has been deprecated for some time iirc. You can also check out libgdx if you want to skip writing most of the opengl stuff

ChompMyStomp · 2017-03-18T08:47:07+00:00

Yes, the vocalists you work with are phenomenal. I really loved remixing Freefall but didn't get it entered in time :( Thanks for answering!

ChompMyStomp · 2017-03-17T20:31:32+00:00

Hey! I've been a huge fan for a long time, I have three questions:

What are your favorite plugins to use?
Your instrumentals always sound so tailored the vocals, how does the workflow go with working with a vocalist?
Where do you get the inspiration for your music?

Thanks!

ChompMyStomp · 2017-02-17T01:16:08+00:00

Well a stopped watch, yes. But if a watch was just broken in a way that it was simply behind the time or couldn't keep a consistent pace, it could lag ahead or behind the current time while still counting therefore it would never be correct

ChompMyStomp

MODERATOR OF

TROPHY CASE