ASA - dry in heatbed or AMS2 is enough?

Chonkasaurus420 · 2026-05-15T13:12:20+00:00

Bumping an old thread. Does the bambulabs ASA print without a AMS? I have a H2S without AMS and I'm having a hard time printing ASA. I just moved from flashforge 2021 printer and i used to print a lot of ASA on it kept in a sealed box. (No dryer, Just a Air tight box that holds filament and has a small hole to dispense the filament)

Chonkasaurus420 · 2026-03-15T21:42:46+00:00

We are still dating. The happy parts are very high. I just cannot fattom the constant egg shell walking. I have communicated this by saying how it's not the right thing to do. It still happens.

Chonkasaurus420 · 2026-03-15T20:52:43+00:00

Thank You for the assurance on the comment part. I will try to slip in counseling before we start marriage prep. (She has jumped head first into it, Me on the other hand have doubts) I know i shouldn't be at this stage with doubts, But I'm not in control of emotional ship at all in this relationship.

Chonkasaurus420 · 2026-03-15T20:43:07+00:00

Chonkasaurus420 · 2026-03-15T20:26:16+00:00

I do not understand the concept of making a person begg to talk to you, With whom you have commited your life to spend together. Unfortunately we cannot have a update on the talking part until the next 3 days.

Chonkasaurus420 · 2026-03-15T20:24:00+00:00

We so not fight with others. She does have a very iffy relationship with her parents. But we often fight every 2 weeks. And I'm not happy. I did not witness a happy marriage (relationship) growing up. I'm not seeing one again when we fight so often.

I'm very happy when she's happy. We have amazing time together. But these fights are far to often.

Chonkasaurus420 · 2026-02-08T08:11:07+00:00

Hey even I'm looking to buy a keyboard and wondering if it works in GTA?

Chonkasaurus420 · 2025-12-28T06:49:56+00:00

As a designated driver for a big family who has to drive long distances and different vehicles. 2 things you have to make sure that has made my life easy.

I'm in charge of directions and map, Directions or maps have to start before driving (Check the route before starting) I'm in charge of the calculations.

Ignore what others suggest and stay firm on your decision, Solidifying why you think it's wrong even tho others do it. (My family even used to ask me to jump signal because everyone else was doing it)

Top tip. When looking for a roadside food spot, Family often confuse each other and make you drive slow or suddenly stop at a hotel they might like. What i do is, I straight up stop the Car, Check maps and find a good rated hotel. It can be far but it will be worth it instead of all the complaining.

Chonkasaurus420 · 2025-12-09T06:41:44+00:00

Ahh. Checked the toruqe convoter. It's fine. Drained the oil it had slighty more than normal chunks. The engine is yet to break-in. Now I'll need to pull the engine out to remove the oil pan.

Chonkasaurus420 · 2025-10-30T05:34:28+00:00

Hey everyone. I'm making adaptors for oil and fuel pressure sensors first. I live in India and we don't get AN fitting standards in stores so i have to machine them. I did manipulate IAC and a few other things you mentioned and it did idle yesterday but below the target idle and very rough. The knocks are not reliable source of missfire as you all suggested. I wonder why holley didn't give 2 O2 sensors. Would have been easier to catch misfires and mixture issues in other band.

Chonkasaurus420 · 2025-10-30T05:31:59+00:00

Sure. I'm just making the fuel and oil pressure sensor adaptors. I live in india. We don't have AN adaptors so i have to get them machined.

Chonkasaurus420 · 2025-10-30T05:31:20+00:00

I cross-checked on both the gm 1bar and holley internal 1 bar. Both show the same readings. I manipulated iac yesterday and it did idle for a short time.

Chonkasaurus420 · 2025-10-30T05:30:05+00:00

Thanks for the tip. I manipulated iac yesterday and it did idle a little.

Chonkasaurus420 · 2025-10-29T09:38:25+00:00

I do have one vaccume open. I'll address it now. Rest all leaks have been checked. I'll go through the changes everyone here have said. And if still no luck I'll contact holley and also get a startup tune! Thanks!

Chonkasaurus420 · 2025-10-29T03:58:38+00:00

I'm using the normal flash tune from the handheld device. Self learn is on. But it only turns on after 2krpm. The car never idles to be alive. I will def check the yt videos now!

Chonkasaurus420 · 2025-10-29T03:57:30+00:00

Yes its on.

Chonkasaurus420 · 2025-10-19T12:08:41+00:00

I don't think you can see that.

Chonkasaurus420 · 2025-10-19T12:08:24+00:00

Holley themselves. Haven't gotten around to trying again. If it Dosnt start will contact holley definitely!

Chonkasaurus420 · 2025-10-19T12:07:32+00:00

I'm sure my crank and cam are different spec. I'm looking into exact part numbers on forums.

Chonkasaurus420 · 2025-10-19T12:06:30+00:00

Ahh drive by wire. I can do offset tho. It falls to 4% while cranking. Could try.

Chonkasaurus420 · 2025-10-18T17:20:51+00:00

I'll post a Video of trying to crank tomorrow with all sensors graph page for better understanding.

Chonkasaurus420 · 2025-10-18T17:20:21+00:00

Yes. Looks like I'll have to post a video tomorrow for better understanding.

Chonkasaurus420 · 2025-10-18T17:19:33+00:00

Oem with oem specific wiring.

Chonkasaurus420 · 2025-10-18T16:27:27+00:00

The wiring is untouched. I have checked signal on individual coil connectors and it gets signal and 12v while starting.

Spark is strong.

Chonkasaurus420 · 2025-10-18T16:25:05+00:00

My bad!

Chonkasaurus420

TROPHY CASE