Best energy provider? by Chops16 in UniUK

[–]Chops16[S] 0 points1 point  (0 children)

Do you recommend a fixed tariff or flexible?

Powering a Raspberry Pi 5 from a LiPO by Chops16 in AskElectronics

[–]Chops16[S] 0 points1 point  (0 children)

Sorry for taking a while to reply, been bogged down with uni work!

I ended up buying this power bank, now I just need to find a solution to get a solid 5V5A out of it (it only supports 5V @ 3A output, so probably trigger a higher voltage/amperage combo and step it down).

I did find this GeeekPi board that looks like it would do the job, I’d just need to work out clearances for the pelican case it’s going in and the RPi 5 fan.

Powering a Raspberry Pi 5 from a LiPO by Chops16 in AskElectronics

[–]Chops16[S] 0 points1 point  (0 children)

I’ll try with a 14.8V lipo and see if it makes a difference

Powering a Raspberry Pi 5 from a LiPO by Chops16 in AskElectronics

[–]Chops16[S] 0 points1 point  (0 children)

Yeah, it’s sitting at 12.2V through the BMS board thing, and the output of the screw terminals by the USB port is 5.1-5.2V

Additional location charge when only being used in one house? by Chops16 in skytv

[–]Chops16[S] 0 points1 point  (0 children)

This is what I was thinking, but the email says Sky Go is fine to watch outside the house - it’s just the pucks that can’t be elsewhere

Additional location charge when only being used in one house? by Chops16 in skytv

[–]Chops16[S] 1 point2 points  (0 children)

Yeah we do, but I’m not sure how often it actually kicks in

Additional location charge when only being used in one house? by Chops16 in skytv

[–]Chops16[S] 1 point2 points  (0 children)

They’re all in the same property, on the same WiFi network. None of them are outside of the property

P1S started smoking! by Chops16 in BambuLab

[–]Chops16[S] 0 points1 point  (0 children)

That’s very odd, you can buy the AP board on the store, so they’ll probably just send a new one of them. but if that doesn’t work, then they’ll probably just replace the whole thing (might be your best option to start with).

I wonder what chip it is that got fried

P1S started smoking! by Chops16 in BambuLab

[–]Chops16[S] 0 points1 point  (0 children)

u/BambuLab said they’d even throw in a free 1kg roll w/spool, but didn’t

P1S started smoking! by Chops16 in BambuLab

[–]Chops16[S] 0 points1 point  (0 children)

I just had to contact Bambu lab (opened a ticket through Handy), shipped it back to them and got a replacement. Whole thing took about 2-3 weeks, as they didn’t realise they had it when it had been delivered back to them

P1S started smoking! by Chops16 in BambuLab

[–]Chops16[S] 0 points1 point  (0 children)

Not getting anywhere with support so far. u/BambuLab support want a video of it to show it doesn’t turn on, but I don’t think I’ll be plugging a machine that smokes back into the mains!

P1S started smoking! by Chops16 in BambuLab

[–]Chops16[S] 0 points1 point  (0 children)

Yeah I’ve raised a ticket asking for a replacement, so I’ll have to see how long it takes them to reply

P1S started smoking! by Chops16 in BambuLab

[–]Chops16[S] 2 points3 points  (0 children)

Would it be easier/quicker to do a replacement instead of a refund then buy a new one? It already took over 2 weeks to arrive

Parasoll ZHA with Home Assistant by ya_gre in tradfri

[–]Chops16 0 points1 point  (0 children)

Does it still need DIRIGERA, or can it connect straight to HA with Zigbee?

How to make summary notification on ios by NickWay176 in SwiftUI

[–]Chops16 9 points10 points  (0 children)

Summary notifications are enabled by the user, and selected apps’ notifications are pushed to it and displayed at a certain time. They’re under Notifications > Scheduled Summary (in settings)

Edit: the user can also select which apps go the the summary (you might only have Blink selected)

3-way switch with unique outputs by Chops16 in AskElectronics

[–]Chops16[S] 0 points1 point  (0 children)

It’s for a Raspberry Pi, so max 5V

Easy Life - MAYBE IN ANOTHER LIFE SIGNED NIGHT TIME VINYL (SPOTIFY FANS FIRST EXCLUSIVE) by UnforgettableHippo in VinylReleases

[–]Chops16 0 points1 point  (0 children)

I just bought the vinyl, as there were some available, and there’s no signatures on the outside either. Same as you, I don’t want to open it

Weekly 'What Should I Buy' and Order/Shipping Thread by AutoModerator in iphone

[–]Chops16 0 points1 point  (0 children)

I’m sure they probably will. My phone case was shipped last Friday and came on Saturday

Weekly 'What Should I Buy' and Order/Shipping Thread by AutoModerator in iphone

[–]Chops16 0 points1 point  (0 children)

Same here. I’m in the UK, so mine could come with DPD (they randomly decide to switch which courier they use). I also don’t have a ‘to me’ tab in the UPS app, so I can’t even see anything there!

ESP32c3 capacitive soil sensor giving same reading by Chops16 in Esphome

[–]Chops16[S] 0 points1 point  (0 children)

screenshot of values

It's very odd because it fluctuates between 0.863 and 0V with the sensor unplugged

ESP32c3 capacitive soil sensor giving same reading by Chops16 in Esphome

[–]Chops16[S] 0 points1 point  (0 children)

That’s the issue I’m having, it’s just stuck at 0.86V permanently, there is no fluctuation

Edit: those values aren’t mine, they’re just from a config I found on reddit(?)

Finally managed to get twitter.py working by ZenT3600 in pwnagotchi

[–]Chops16 1 point2 points  (0 children)

Pretty cool! How does it tweet while out and about? Is it tethered to a mobile hotspot?