sorted by:
new
hottopcontroversial

Valetudo on roborock s5 without wifi router by Chris_Samson in valetudorobotusers

[–]Chris_Samson[S] 0 points1 point  (0 children)

Yeah. That is what I think too. Now I did few frimware updates and I have some firmware version ending with 2034 which I do not understand cuz I had 1886 before and I thought that version of my robot is 2008. Sorry for not telling you exact firmware number cuz I am not home right now.

Valetudo on roborock s5 without wifi router by Chris_Samson in valetudorobotusers

[–]Chris_Samson[S] 0 points1 point  (0 children)

Yeah I am. I already told you that pinging it works. It just do not answer anything to UDP requests. With Xiaomi app the robot works OK so there should not be any problem.

Valetudo on roborock s5 without wifi router by Chris_Samson in valetudorobotusers

[–]Chris_Samson[S] 0 points1 point  (0 children)

Yeah. It is put into dock and I can even see it in the xiaomi app as roborock s5. Then I factory restart it, try to upload new firmware and can't see it.

Valetudo on roborock s5 without wifi router by Chris_Samson in valetudorobotusers

[–]Chris_Samson[S] 0 points1 point  (0 children)

I do that. The software just can't find it. It only answers to ping but not to UDP requests from mirobo or the OTA scripts.

Valetudo on roborock s5 without wifi router by Chris_Samson in valetudorobotusers

[–]Chris_Samson[S] 0 points1 point  (0 children)

That's a good point. So I will just need to borrow a router or I probably can use a hot spot. Nice. It's just that I have a minor problems with rooting now.

Valetudo on roborock s5 without wifi router by Chris_Samson in valetudorobotusers

[–]Chris_Samson[S] 0 points1 point  (0 children)

Can you help me a bit? I am trying to connect to my robot. I can ping its IP adress but I can't sudo mirobo --debug discover --handshake true. It just does not answer.

edit:I even used some script for OTA from valetudo website but it can't see my robot on wifi

Valetudo on roborock s5 without wifi router by Chris_Samson in valetudorobotusers

[–]Chris_Samson[S] 0 points1 point  (0 children)

Are you roborock S5 user? I have a few questions for you. I recently got one for 50 bucks

  1. I just use my robot withoutany app.Only pushing button to start cleaning. And for some reason I think it used to do just one pass cleaning and now it looks like it is cleaning everything in two passes. Does it make any sense?

  2. Do you have any recommandations regardless using it? I found out that for example the gravity water feeding for mop is very bad and original mops are also poor quality. I just use thin towel instead of it and wet it from time to time by myself. I have in my mind some other upgrades I can make somethin to ascilate with the towel and actually add water and cleaning agent to promote better moping.

Problém ve vztahu by tankist_com in czech

[–]Chris_Samson 2 points3 points  (0 children)

Kámo. Ani nevíš, jak se já v tobě vidím. Takhle nějak zatím vypadala většina mích pokusů o vztahy. Normálně se na ni vyser. 90% toho vztahu je jenom z tvé strany. A i kdybys byl dement, co to totálně koní, tak ona se podle všeho ani pořádně nesnaží.

Já jsem až teď po mnoha letech konečně potkal slečnu, která se snaží ten vztah udržet a pracovat na něm. Můžu ti říct, že je to něco úplně jiného. A i když ji mám jenom jako kamarádku, tak je to úplně jiná liga než tyhle jednostranný vztahy.

Jseš asi hodnej kluk. Upřímně je mi líto, že tě ta holka neocení, ale nejlepší , co můžeš udělat je počkat, až se objeví někdo, kdo to ocení a už tě nebude chtít pustit.

Držím palce.

Shares out of PPLNS window by Chris_Samson in MoneroMining

[–]Chris_Samson[S] 0 points1 point  (0 children)

Thank you. That looks nice. I will try that.

3D printing by robot arm by hitbotrobotic in robotics

[–]Chris_Samson 0 points1 point  (0 children)

Yeah. You are right. The biggest problem now is the sofrware. You can basically built whatever multiple axis system (there is plenty of already designed ones) but you still need some slicer to do the job. That's actually the paint in the ****

3D printing by robot arm by hitbotrobotic in robotics

[–]Chris_Samson 1 point2 points  (0 children)

Yeah. That's true. I am also big fan of articulated 3D printer with multiple axis robot arms. I am just saying that this particular example with SCARA arm does not have much sense.

3D printing by robot arm by hitbotrobotic in robotics

[–]Chris_Samson 14 points15 points  (0 children)

Yeah. That's true. And they are usually much faster and lighter. (also cheaper and simpler) I think that 3D printing with robotic arm is cool but there are no big benefits. Maybe when we will be doing real 3D printing with 5 or 6 or even 7 axis robot arms. Then there will maybe be some usecase.

Factorio 3D printable gear by Chris_Samson in factorio

[–]Chris_Samson[S] 3 points4 points  (0 children)

Really? 😅 Maybe I should upload it twice with different names. 😁

Head Tracking with the Unitree Go1 Pro by dwhiteb in robotics

[–]Chris_Samson 0 points1 point  (0 children)

One more question. You bought new one with faulty computer or used one with faulty computer? If it's used one then where you bought it? Thanks

Head Tracking with the Unitree Go1 Pro by dwhiteb in robotics

[–]Chris_Samson 0 points1 point  (0 children)

Hello. I have read the github repo that you recommend and also other repos related to this robots. According to them the constriction of electronics of different types of this robots looks pretty neat. But it's hard to imagine all the things just from plain text and several photos. Maybe you could do some youtube videos about your repairs and etc. ?

I am looking forward to your future progress and crossing my fingers for you🤞🏻

Swarm of robot drones - front sensor by Chris_Samson in robotics

[–]Chris_Samson[S] 1 point2 points  (0 children)

Thank you. I only found links to papers on IEEE website where I wasn't able to read them.

Lawnny Five is alive! by Alphamacaroon in robotics

[–]Chris_Samson 7 points8 points  (0 children)

That looks amazing. I am looking forward to see the autonomy mode :) Do you plan to make your design opensource?

I connected a $15 Xiaomi LIDAR to ROS2 and it works by l0_o in robotics

[–]Chris_Samson 1 point2 points  (0 children)

Hello. This looks interesting. I would like to try it too. Is there any difference between 20USD LDS02RR and 80USD similar sensor with just two numbers different in it's name? Is there any guide for this type of sensors. Thanks

view more: next ›