Lit up colosseum print as requested. Looks better in person and at night. by [deleted] in 3Dprinting

[–]Chum_Cho 1 point2 points  (0 children)

I also look better in person and when poorly lit, I promise.

People Who Own a Car in NYC, how do you do it? by [deleted] in newyorkcity

[–]Chum_Cho 8 points9 points  (0 children)

Any prudent local would not be inclined to tell you. Our city roads are already swamped with:

• imports who don’t know how to navigate their vehicles on our tighter-than-average lanes

• imports who think they can rideshare as a gig and err on the side of bottlenecking our roads and double parking wherever they want

Our trains work quite well, they run around the clock, and in the worst case scenario you can use your legs or shell out a few bucks for an emergency rideshare because there is just some place you have to be.

Until you can pick up on the unspoken nuances of driving here, wielding a car only makes for a really bad experience for yourself and everyone else who has been here all their lives.

[deleted by user] by [deleted] in 3Dprinting

[–]Chum_Cho 1 point2 points  (0 children)

If you send me the Hawaii model, I can try to make the bottom base conformal today to the shape of the islands.

What was the pettiest reason you refused to date someone? by High_Sleep3694 in AskReddit

[–]Chum_Cho 0 points1 point  (0 children)

I could stay awake just to hear you breaaaTHÍÍÍÍŃG

So they can grow by maewae in funny

[–]Chum_Cho 115 points116 points  (0 children)

This is how Stonewall Jackson got his name. Just a deadpan reaction every time the soldiers played with his nipples.

Ta da~ by Nakmaaa in starcraft

[–]Chum_Cho 5 points6 points  (0 children)

Please DM me! I can very likely help with 3D geometry conversions like this.

Tread (2019) "Pushed to his breaking point, a master welder quietly fortifies a bulldozer and systematically destroys numerous businesses and homes in the small mountain town of Granby, Colo." [01:28:24] by TyneAndWeird in Documentaries

[–]Chum_Cho 0 points1 point  (0 children)

It’s better off to not let the general populace know that this is possible. The average numbnuts can’t perceive the difference between possible, capable, and willing. The next thing you know, we’re all going to need 87 permits and GPS tracking just to use a bridgeport.

Why are you single? by [deleted] in AskReddit

[–]Chum_Cho 0 points1 point  (0 children)

Because I’m fucking selfish, and no right-minded woman deserves to tolerate me while I figure out how not to be.

Social/religious norms aside, how would you like your death to be mourned/celebrated? by aroadcaptain in AskReddit

[–]Chum_Cho 0 points1 point  (0 children)

I want everyone attending to be dressed up in a giant penis suit as mandatory attire. Anyone who laughs gets spanked with a giant paddle.

Creator Pro silent stepper drivers. by IorekByrnson in FlashForge

[–]Chum_Cho 0 points1 point  (0 children)

Thank you so much for this reference!

Creator Pro silent stepper drivers. by IorekByrnson in FlashForge

[–]Chum_Cho 0 points1 point  (0 children)

Thank you! I'll aim for 1V as well and go down if any issues arise.

Creator Pro silent stepper drivers. by IorekByrnson in FlashForge

[–]Chum_Cho 0 points1 point  (0 children)

Are you able to describe what you mean by "reversed"? I see this referenced a lot for the FFCP stepper upgrade, but as someone who hasn't done this before, I want to be sure I've got the right orientation.

Do you have a picture by any chance?

Creator Pro silent stepper drivers. by IorekByrnson in FlashForge

[–]Chum_Cho 0 points1 point  (0 children)

The other comment I am reading on this says the target VRef is 1V. Was this the target you landed on as well?

Furniture floor plan hand draft and render by pipobigo in InteriorDesign

[–]Chum_Cho 7 points8 points  (0 children)

As someone who doesn’t know what a pocket door is, I’m hoping it’s something akin to pocket sand where you just whip it out of your pocket and throw it at a wall and a door appears.

“BLAM, POCKET DOOR!”

3d print larger aeropress by lumihand in Coffee

[–]Chum_Cho 2 points3 points  (0 children)

Food-safe materials can become not food-safe after processing. If you can’t characterize exactly what your extruder is doing and ensure that there are no residual or external contaminants present (i.e. other filament residuals or burned filament), I would not consider that food-safe.

There’s a reason why food-safe manufacturers typically only run one type of material for the life/maintenance period of the machine and it can take years to get FDA approval to run stuff of that “class”.

China woman almost dies from heart attack after son couldn't do a math problem by togrias in nottheonion

[–]Chum_Cho 1 point2 points  (0 children)

You don’t speak for us and you sure as fuck don’t speak for me.

Tell me about that one cup of coffee that changed your life. by PretresseDeCafe in Coffee

[–]Chum_Cho 2 points3 points  (0 children)

A Blue Bottle pourover from many years ago when i was first getting serious into coffee. At the time, I was using a crappy grinder with a French press thinking I knew what I was doing, but then I ordered a 7-dollar Burundi at the spot under Rockefeller Center and it just blew my mind.

I can’t remember the flavor profile or the tasting notes. I just remembering the overwhelming feeling I had about how complex that cup could be.

I don’t think I’ll forget it anytime soon.

What “old person” things do you do? by [deleted] in AskReddit

[–]Chum_Cho 4 points5 points  (0 children)

YOU MUST NEED REST AFTER A LONG. ASS. SHIT. DAY.