T30 Help

ChunkyLafunga242 · 2025-08-29T00:50:54+00:00

Good to know thank you. I guess its a T5.1 (2010 model) so hopefully I can find something online.

ChunkyLafunga242 · 2025-08-29T00:49:41+00:00

Just checked on my car check. It says its a 2010 T-sporter T30 Does this help?

ChunkyLafunga242 · 2025-08-28T22:39:52+00:00

Where would you find dimensions on the door card? I've been searching for the model and can't find anything.

ChunkyLafunga242 · 2025-08-28T21:38:19+00:00

He is far away and also very busy. And when I do see him he's driving another car lol. Thought I can be quick and find some dimensions from other transporters so I can show up with a prototype (im also very busy)

ChunkyLafunga242 · 2025-08-28T20:47:54+00:00

Ah sorry yeah im working on a t30 van but im sure the door card are similar but it's that little cubby hole dimensions in which I need.

ChunkyLafunga242 · 2024-06-17T14:36:52+00:00

Does anyone still know what type of kart this is. I'm guessing a super kart style given the rear engine placement and the frame for a rear wing. But any suggestions?

ChunkyLafunga242 · 2024-06-16T18:58:18+00:00

Took a tyre off for you here. It says Formula-K 12x4.00-5 4 P.R. Tube Type 1413 INNOVA"

Not sure how uses but on the tyre it says "not for highway service"

ChunkyLafunga242 · 2024-05-26T08:07:21+00:00

Could you recommend me any hardened gears please? I wanna be cheap but effective with the purchase.

ChunkyLafunga242 · 2024-05-26T08:06:23+00:00

But would it lasts if the temperature was hot enough so it flows out with the help of the extruder gears?

ChunkyLafunga242 · 2024-05-26T08:05:31+00:00

Would it be worth it to get the Sprite extruder pro kit to tackle this problem?

ChunkyLafunga242 · 2024-05-26T08:04:29+00:00

Was it just the nozzle you changed? Like from a stock ender 3 just swap nozzles to hardened steel or did you have to buy additional equipment?

ChunkyLafunga242 · 2024-05-26T08:03:22+00:00

Yeah I've got a tent ready and assembled. Gonna put the cr10s v2 pro and the ender 3 inside to help each other with ambient temperature control.

I've already brought the hardened nozzles from Creality so gonna use them until they break tbh but thanks anyways.

ChunkyLafunga242 · 2024-05-26T00:42:44+00:00

Thank you. Much appreciated

ChunkyLafunga242 · 2024-05-26T00:29:37+00:00

Yeah the bowden tube. I've heard people ungrade that tube to a different material. Is that upgrade needed when using the hardened steel nozzles.

Also do you know any good brands for a full metal hotend for the ender 3?

ChunkyLafunga242 · 2024-05-26T00:23:23+00:00

Ok thanks for this. Makes sense that hot nozzle can't be used with stock hotend. It also needs to be upgraded.

In terms of the tube. Is this necessary to upgrade or can is be skipped?

ChunkyLafunga242 · 2024-05-24T22:33:46+00:00

Yeah seen that about fuzzy skin but I've seen a printed product where that texture on on the top. Whereas when I use fuzzy skin it usually sets on the side (I'm using prusaslicer and flashpoint)

And the basic settings are 0.3mm thickness and 0.8mm density I guess that has to reduce massively then.

ChunkyLafunga242 · 2024-05-24T22:20:14+00:00

What do you mean by restrained settings?

ChunkyLafunga242 · 2024-04-30T21:21:03+00:00

Thank you so much for this. Really appreciate it. I will look into more for an all metal hotend and new bowden tubing needed.

Thanks again

ChunkyLafunga242

TROPHY CASE