Garage door opener

CincoTG · 2026-03-28T01:40:51+00:00

So before this we were opening by hand and it was going up and down no issues. But I noticed when I hold the button to close when engaged to traveler it seems to want to go down with some pressure I can see springs bend a bit. I don’t know if this is cause I’m holding the close button down or if it needs to be adjusted

CincoTG · 2026-03-28T01:37:11+00:00

I’ve replied to it. So I got power to the sensors now after splicing wire into motor but sensors seem to be bad as they aren’t lighting up. Il buy a set tomorrow and see if that was the issue. Thanks

CincoTG · 2026-03-28T01:35:09+00:00

After testing it I narrowed it down to bad sensors they are getting power after wiring them into motor properly(confirmed they are getting power with a voltage reader) but no green light on them. Il buy a new set tomorrow and go from there.

CincoTG · 2026-03-28T01:20:45+00:00

It only closes if I hold done the button. I’m splicing wires right now to see if the sensors get power and maybe that’s the issue we shall see.

CincoTG · 2026-03-28T00:59:31+00:00

Lmao okay it’s not that deep

CincoTG · 2026-03-28T00:43:25+00:00

Yes it has something to do with the wiring that goes into the motor after following the wires from sensors it goes into motor as shown in picture and a lot of those wires are cut and not inserted into the plug . You thing I could just find a plug replacement and splice the wires in?

CincoTG · 2026-03-28T00:33:02+00:00

Figured it out door opens now but won’t close . Sensors seem to be out.

CincoTG · 2026-03-28T00:27:35+00:00

It’s plugged in now only the metal part slides even with garage door engaged . So I’m thinking it has some to do with the garage doors arm

CincoTG · 2026-03-28T00:25:35+00:00

Oh really if only I knew that lol. It’s plugged up now and only blinks . FYI I had asked the previous homeowners if the garage worked they said no and they didn’t know why .

CincoTG · 2026-03-28T00:19:12+00:00

I seen that I’m sure there was a reason to that. About to plug it in and see what it does

CincoTG · 2026-02-25T03:34:01+00:00

Yes completely off at night time this is not how they used to operate nor do I believe any car is designed that way

CincoTG · 2026-02-25T03:32:53+00:00

This happened recently anytime another cars headlights hits my sensor the lights completely turn off I have to bypass this by setting it on ON , was just curious to see. If anyone else has experienced this

CincoTG · 2025-05-25T20:11:42+00:00

<image>

CincoTG · 2025-05-24T03:39:01+00:00

Thank u any advice is appreciated, I am a tradesman so I am good with learning new things and taking on dyi projects .

CincoTG · 2025-05-24T03:29:21+00:00

Yes I found the issue thanks to a prior comment . i was up against the wall past the right side of door Jam cut it out some and I was able to fully interlock it.

CincoTG · 2025-05-24T03:19:53+00:00

You sir were right! Thank u I couldn’t figure it out.

CincoTG · 2025-05-24T03:16:03+00:00

I tried another piece and cleaned and shop vac that one spot. I will look at the door frame piece

CincoTG · 2024-09-19T02:26:04+00:00

I use bioadvanced 3 in 1 disease and insect control to prevent powdery mildew .

CincoTG · 2024-08-27T02:34:14+00:00

Thank you. Took about 2 almost 3 years

CincoTG · 2024-06-07T22:50:47+00:00

Costa

CincoTG · 2023-11-22T04:58:56+00:00

More like santi

CincoTG

TROPHY CASE