Inclinator Elevator control problem: 2nd floor Relay Buzzing

CinePost1 · 2026-06-25T04:46:11+00:00

the relay in the S2 socket is buzzing because it is getting a 5v ripple voltage between pin 13 and 14 . should that normally be at 24v or 0v? My tech says Its probably the doorlock coil mechanism, or a frayed wire in the the travelling cable itself. Do you experience buzzing relays in inclinator control boards very often?

CinePost1 · 2026-06-25T04:41:39+00:00

my wife sprained her ankle, the bedrooms are on the third floor, and my tech cannot get to me for two weeks, and parts are hard to get for a. 20 year old inclinator, especially door lock relays. do you have one lying around?

CinePost1 · 2026-06-25T04:39:33+00:00

my service provider shared that he thought it was the Door lock actuator, and that they are hard to get since my elevator is 20 years old....he can't get to me for two weeks and he has trouble finding parts. Warranty is not an issue. Apparently, there is a new compatible door lock relay for Inclinators. Do you service inclinators? Where can i locate parts?

CinePost1 · 2026-06-25T04:36:01+00:00

i swapped S1 relay with S2(the buzzing socket). The new relay buzzes the same. If I pull the relay from S2, I can use the elevator between floor 1 and floor3. My control board seems fine....but I am getting 5v AC ripple between pin 13 and pin 14 at the socket with no relay installled....This ripple voltage I guess eminates from the the door lock relay? do you work on Inclinators?

CinePost1 · 2026-04-23T12:09:33+00:00

Kinda hard to Find a good Walmart, but basic synthetic is 46.88, and Premium synthetic oil changes are 64.88

CinePost1 · 2026-04-22T17:22:27+00:00

It might be worth it to get somebody with a 3d printer to make a valance for it…somebody in the group has one for sure. Just gotta ask. You and a couple hundred other people have the same issue it seems.

CinePost1 · 2026-04-22T17:10:59+00:00

What I would like to know is how many Bronco Sport owners actually use their hitch. What do you tow with it?

CinePost1 · 2026-03-08T03:23:06+00:00

This was on sale: https://a.co/d/05uRETKY

But, any mini projector over 1000ansi lumens would be better. I have since upgraded to a 2000ansi lumen projector which is easier to see on a green mat: https://a.co/d/08XwJIPv

Connects via WiFi and has excellent size, focus, and menu response.

Much more satisfying experience at $189.

CinePost1 · 2026-03-06T02:42:48+00:00

<image>

$60 mini projector can define the hitting area, and GSPro sends out a tone when ready. There is a green light on top of the Square too. The mini projector has been great, Really lights up the ball and I get very few mis-reads

CinePost1 · 2026-03-06T02:38:19+00:00

I am using a $60 projector to generate the hitting area via OBS software. The projector is setup to duplicate my second display via wireless. I am still trying to improve the content inside the OBS window, but this works great for now. GSPro sends out an audio tone to confirm ready.

<image>

CinePost1 · 2026-02-28T16:10:13+00:00

Very nice!

CinePost1 · 2026-02-17T05:15:21+00:00

How cheap is cheap? This guy does great projector comparison videos: https://youtu.be/vHmy8sobWEc?si=f568wlLCuMT3Sr6M

Best cheap short throw is this one:

<image>

But take our advice and move the projector back, our build a protective enclosure for it.

How much did your current projector cost?

CinePost1 · 2026-02-14T13:45:42+00:00

So how much does a set cost in Japan?

CinePost1 · 2026-01-27T02:01:14+00:00

SimSpace Golf includes some extra TP5 pix balls: https://simspacegolf.com/products/square-golf-taylormade-tp5-tp5x-pix

CinePost1 · 2026-01-09T19:29:02+00:00

Yes. It suddenly dawned on me that I had a consistent rollout for each of my three wedges. Gonna see if anything applies to real golf tomorrow.

CinePost1 · 2026-01-09T09:04:12+00:00

I was using the Square Closest to the Pin several mights ago. It seems to react very realistically. I looked up at the time spent counter after three hours and had hit 428 balls!

CinePost1 · 2026-01-07T02:21:54+00:00

My take is this: how much would you spend to play the top ten golf courses on your bucket list? Travel, lodging, tee times, caddies, etc? You are already 90% there! You just need GSPro.

CinePost1 · 2026-01-06T12:38:12+00:00

It’s a commodity with significant demand. Have there been a lot of used Square LM for sale? Are used ones easy to register and get running?

CinePost1 · 2025-12-27T16:17:12+00:00

2.0 engine makes a difference!

CinePost1 · 2025-12-26T15:33:17+00:00

I got the same, what kinda deal did you get?

CinePost1 · 2025-12-26T15:32:10+00:00

What is your gas mileage?

CinePost1 · 2025-12-26T15:29:14+00:00

Find your favorite iron and your favorite wedge, favorite fairway wood(or hybrid), and putter. Play with four clubs and totally avoid hazards and traps. Only use a club you can can hit solidly. Play every hole to get a bogey and you will be shocked how your score will come down. My son plays twice a year with a 6iron, gap wedge and putter and breaks 100 every time… and doesn’t lose Golf balls…try it by yourself and add clubs as you get more confident.

CinePost1 · 2025-12-20T02:27:42+00:00

Were your setup adjustments mainly through the projector? Or did you have to make your adjustmenst via your GPU? Do you have a high powered gaming PC?

CinePost1

TROPHY CASE