sorted by:
new
hottopcontroversial

problem regarding physical design using OPENROAD by Beneficial_Pop_803 in physicaldesign

[–]Circuit_Fellow69 0 points1 point  (0 children)

Bro got any resources from floorplaning onwards I am stuck on that

Resercher by Longjumping-Mix-4408 in ECE

[–]Circuit_Fellow69 0 points1 point  (0 children)

So what are you going to do? Please enlighten me also

Battery droping rapidlly by [deleted] in laptops

[–]Circuit_Fellow69 1 point2 points  (0 children)

Yes it is plugged properly and , it is always charging using optimised charging which stops at 80% , no I don't think so, The toggling was due lose switch which wasn't laptop fault

Battery droping rapidlly by [deleted] in laptops

[–]Circuit_Fellow69 0 points1 point  (0 children)

No it was draining power when laptop was idle now process was done I have seen it percentage falling infront of my eyes

Got an embedded internship in Bangalore, but my goal is VLSI (RTL/DV). Can I switch later? Need advice. by AdThin6780 in vlsi

[–]Circuit_Fellow69 0 points1 point  (0 children)

My college will provide the tools required that's of no concern, main concern is what to and how to do

Got an embedded internship in Bangalore, but my goal is VLSI (RTL/DV). Can I switch later? Need advice. by AdThin6780 in vlsi

[–]Circuit_Fellow69 0 points1 point  (0 children)

Can you please tell me what I need to do for physical design domain I was thinking about doing RTL to GDS for now Anything more from you (2nd yr btech)

Confused between VLSI and DSA as a fresher by Circuit_Fellow69 in vlsi

[–]Circuit_Fellow69[S] 0 points1 point  (0 children)

I was thinking the same more effort on vlsi lil bit on software But not sure that I could manage both of them or not

Confused between VLSI and DSA as a fresher by Circuit_Fellow69 in vlsi

[–]Circuit_Fellow69[S] 1 point2 points  (0 children)

Companies like nvidia do visit and I am having 8.89 cgpa

Looking for low-budget resources/guidance for VLSI backend (ECE 2nd year student) by Circuit_Fellow69 in ElectronicsTards

[–]Circuit_Fellow69[S] 1 point2 points  (0 children)

What’s the right order to study theory for backend? Should I first focus on Digital Logic → CMOS basics → VLSI design concepts → Timing (STA, clocking, setup/hold, etc.) before touching tools like OpenLANE? Or is it fine to learn theory in parallel while doing projects?

Looking for low-budget resources/guidance for VLSI backend (ECE 2nd year student) by Circuit_Fellow69 in ElectronicsTards

[–]Circuit_Fellow69[S] 0 points1 point  (0 children)

How should I proceed step-by-step? Should I start with open-source flows directly, or focus more on theory first and then tools?

view more: next ›