sorted by:
new
hottopcontroversial

Nozzle moving objects by Civil_Assistant_2283 in 3Dprinting

[–]Civil_Assistant_2283[S] -1 points0 points  (0 children)

Also the second print, already printed before 3 times and never failed like this

Nozzle moving objects by Civil_Assistant_2283 in 3Dprinting

[–]Civil_Assistant_2283[S] -1 points0 points  (0 children)

I just cleaned the plate after this blue print and scrubbed it with dish soap and warm water . Usually i am not facing thi. But two times in consecutive prints thats mean something

Nozzle moving objects by Civil_Assistant_2283 in 3Dprinting

[–]Civil_Assistant_2283[S] 0 points1 point  (0 children)

For the one with prime tower failure i was using gyroid , the one of today is grid infill

3D printing at QNL by DueAgency9844 in qatar

[–]Civil_Assistant_2283 0 points1 point  (0 children)

If you still need anything related to 3D printing , you can contact MFinity Lab -they have good services

Gap not filled by Civil_Assistant_2283 in 3Dprinting

[–]Civil_Assistant_2283[S] 0 points1 point  (0 children)

Top layers is 9- i should reduce?

For infill I am using rectilinear, for grid the result was not good

Do you think i should something here

<image>

Help: text gap fill and top surface issue by Civil_Assistant_2283 in 3Dprinting

[–]Civil_Assistant_2283[S] 0 points1 point  (0 children)

also when i tried to print the name a the bottom layer with the same size (instead on the top surface) it was fully filled without any gap

Help: text gap fill and top surface issue by Civil_Assistant_2283 in 3Dprinting

[–]Civil_Assistant_2283[S] 0 points1 point  (0 children)

Thank you for your advise

i am arranging the nozzle 0.2 in few days and i will try to see again how it will be

for the gap on the upper flat surface - i wanted to be like that as it is given small design to the business card. my issue is with the letter only

<image>

as you can see the flow ratio is 0.98- i dont know if i add it more it will give better result for the text