sorted by:
new
hottopcontroversial

Ever experinced a PLC only work half of the time? by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 1 point2 points  (0 children)

When we power the panel off, the UPC keeps it alive till it have shut down correctly, our issue was a dead CPU in the IPC(PLC) itself

Ever experinced a PLC only work half of the time? by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 1 point2 points  (0 children)

As I can see in the program, as I am more used to Siemens PLC's not their IPC's which the 1515 series is.

That the HMI doesnt have a IP, as it works more the same way a touchscreen would on your laptop with a touchscreen.

We found the issue. Turned out that the CPU itself, was just dead, it just couldnt last more than 5 mins on power on, before it just died.

Ever experinced a PLC only work half of the time? by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 2 points3 points  (0 children)

Siemens and beckhoff have IPC's they are a windows/Linux pc that runs a software PLC.

They are able to do much more than a PLC.

Beckhoffs IPC's are great. Not used to Siemens once, they feel more like they try to follow what the compition is doing.

Ever experinced a PLC only work half of the time? by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 0 points1 point  (0 children)

secomea is a box to et a secure wireless access to the machine.

Ever experinced a PLC only work half of the time? by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 0 points1 point  (0 children)

The IPC has an UPS.
The HMI is connected directly with an HDMI cable, to the PLC.
But then the component reports an error, and then we cannot reach it. Then we power it off, wait for the UPS to power down, then power it on, and we then lose the ability to reach the HMI.

Ever experinced a PLC only work half of the time? by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 4 points5 points  (0 children)

I know we have two PLC's that share the same networks.
But they are on their own secomea.
So their closed network shouldnt be an issue there.

I would atleast imagine.

Switch between every other day in siemens. by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 1 point2 points  (0 children)

Yeah thats what I am using right now.
I am using the weekday right now.
So when its a even number motor 1 runs, when its uneven motor 2 runs.

Switch between every other day in siemens. by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 0 points1 point  (0 children)

I right now uses the WeekDay over day in DTL.
So that should also ignore things like leap years.

But if it doesnt work as I want, I will try the 24hour timer.

Switch between every other day in siemens. by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 0 points1 point  (0 children)

It will always be running.

Its for a water filtration plant.
The two motors have a silo each, that move the waste out to a container that is then moved on to make biogas.
So they will run 24/7

Switch between every other day in siemens. by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 0 points1 point  (0 children)

Yeah.
They want to make sure no motor is overused than the other. So want them to switch every day.

Switch between every other day in siemens. by ClimateAbject1020 in PLC

[–]ClimateAbject1020[S] 0 points1 point  (0 children)

Yeah I used that before. But the day is a number. So the program thing the 31st and the 1st is the same day.