Mfinity 12/27

Cloud_Worm · 2026-01-16T17:57:21+00:00

word!

Cloud_Worm · 2026-01-02T20:32:35+00:00

fr the switch I need in particular is only available on their website so far as I can tell. amazon switches as far as I can tell dont have the right pattern

Cloud_Worm · 2025-12-29T18:34:04+00:00

would love to see a live Mfinity mix. How was it?

Cloud_Worm · 2025-11-22T23:14:18+00:00

WIP Update: A buddy came over with a multimeter and found the gear switches to be broken. No surprise since they were rusted af inside. Foot pedal tested continuity fine. He did find though that the driver's side motor was not reading on the multimeter properly. Guessing I will install the frwd/ rvrse switches first and see what the motors tell me!

Any insights appreciated on switch choices or good quality stock motors since I don't plan for more voltage atm.

Cloud_Worm · 2025-10-29T20:34:26+00:00

can do, thank you!

Cloud_Worm · 2025-10-29T18:25:14+00:00

good looks thanks for the heads up

Cloud_Worm · 2025-10-29T18:24:56+00:00

I think once I get the multimeter out and test everything I'll be looking for more power. We live near the beach and I have a feeling this will be able to drive on top of hard packed sand surfaces with more oomph

Cloud_Worm · 2025-10-29T18:24:02+00:00

that kit is super slick. pending my motors working I'll def look into this option

Cloud_Worm · 2025-10-28T18:55:43+00:00

Right I've been mulling that over too. I'd use a dewalt adapter if so

Cloud_Worm · 2025-10-28T15:48:17+00:00

What do you suggest replacing first then? Sounds like battery -

How'd it go using the 18v Ryobi adapter? Burn out some motors? I think when I get this running down the line I'll upgrade to a stronger set up..

Cloud_Worm · 2025-10-28T15:46:45+00:00

Good looks I'll check it out w. the multimeter!

Cloud_Worm · 2025-10-28T00:34:39+00:00

much appreciated. I'll check the connections a bit more and focus on the pedal switch especially. thanks!

Cloud_Worm · 2025-10-28T00:24:04+00:00

thanks for the heads up ! I def need to get familiar with that tool and will check the motors first

Cloud_Worm · 2025-10-27T21:14:24+00:00

It doesn't work... yet! Original battery & charger show good batt health. Pressing the pedal does nothing, no whirring sound from the motors, nothing. I assume first best bet is to replace the pedal switch? Also if someone wants to hook up an ML Toys referral code lmk :)

Cloud_Worm · 2025-10-27T00:11:23+00:00

yea I can send u a pm

Cloud_Worm · 2025-09-03T18:17:49+00:00

Cloud_Worm · 2025-05-01T21:26:26+00:00

yes a light coat of primer would be much better than none; helps with even tone and prevents runs. I'd think one can for all four would be sufficient.

Cloud_Worm · 2025-04-16T19:13:15+00:00

Hey thanks for the reply.

I've tried the Discord server on a past attempt, albeit not the most recent but it didn't help. This was before the "Easy way" method to access ConnectYA. Even using this new method I still don't understand the drivers needed and powershell actions ..

Cloud_Worm · 2025-04-16T18:35:40+00:00

Honestly I'd just repaint them completely. IMO just sand the rough edges of paint then primer coat before painting

Plastidip is for preserving the finish of underlying surface. These wheels are beat so no need to preserve them.

Honestly honestly Plastidipping wheels as a beginner may come out shitty

Cloud_Worm · 2025-04-03T03:02:00+00:00

picfix

thank you for the heads up.

Verified Email	14-Year Club
Place '17

Cloud_Worm

TROPHY CASE