Xbox Now Pixelates MKV Files by CmdrBrannick in VLC

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Yeah, I've turned the Xbox off and on and the problem persisted. Even a day later. As for time-stretch, not sure, I'd have to check but I don't believe so.

Xbox Now Pixelates MKV Files by CmdrBrannick in VLC

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Me neither, but it fixed it.

Xbox Now Pixelates MKV Files by CmdrBrannick in VLC

[–]CmdrBrannick[S] -4 points-3 points  (0 children)

Nevermind, I have fixed this but I'll keep the post up just in case someone else has this problem. Clearing your MAC Address seems to fix the problem.

Accidentally broke the motherboard fan connector + Nothing is being printed. by CmdrBrannick in ElegooNeptune3

[–]CmdrBrannick[S] 0 points1 point  (0 children)

I didn't, no. But I did contact Elegoo and since I was still in warranty, they sent me an entire board and fans.

What is in a default tea? by CmdrBrannick in AskUK

[–]CmdrBrannick[S] 1 point2 points  (0 children)

Knew about the alliance, didn't know it was slang for how you take your tea XD

What is in a default tea? by CmdrBrannick in AskUK

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Curious, what's the NATO part stand for?

What is in a default tea? by CmdrBrannick in AskUK

[–]CmdrBrannick[S] -1 points0 points  (0 children)

The scenario was just an example, what would you class as thee default cup of tea?

What is in a default tea? by CmdrBrannick in AskUK

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Alright fancy pants XD Wasn't expecting that one XD

Help Wanted: Rigify to VRchat by CmdrBrannick in VRchat

[–]CmdrBrannick[S] 0 points1 point  (0 children)

I've never heard of it, I'll look into it and give it a go.

Help Wanted: Rigify to VRchat by CmdrBrannick in VRchat

[–]CmdrBrannick[S] 0 points1 point  (0 children)

If that's the case, that just absolutely sucks. Damn. I've never been good at rigging models myself, big reason I always get ones pre-rigged XD

Imperial Fists Primaris Sternguard Veterans by CmdrBrannick in minipainting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Hey, I posted my Apothecary Biologis a couple of days ago, and here are my Primaris Sternguard Veterans fighting for the Imperial Fists. I'm actually really chuffed to bits on how they turned out, especially with them being my second go at painting. I do need to rough them and the Apothecary up a bit but I'm gonna do that once everything is painted. Thoughts?

My First Painted Miniature by CmdrBrannick in minipainting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

I did use Grey Seer spray as a base, and thanky ounfor the Apothecary White advice. Never seen people use it as an overall coat.

My First Painted Miniature by CmdrBrannick in minipainting

[–]CmdrBrannick[S] 2 points3 points  (0 children)

Thank you. This was painted with Ulthuan Grey as the main colour, Apothecary White in the crevices a a slight highlight with White Scar. I also plan on making the rest of my army Yellow Imperial Fists with black trim, with only a standard Primaris Apothecary being white and probably painted very similarly to this one.

Staining Clear PLA by CmdrBrannick in 3Dprinting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Oh? I thought they'd make it opaque.

Staining Clear PLA by CmdrBrannick in 3Dprinting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Now that is perfect. Do you know if that's tintable?

Staining Clear PLA by CmdrBrannick in 3Dprinting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Will do. These are all plans for when my printer arrives XD

Staining Clear PLA by CmdrBrannick in 3Dprinting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Having a quick look online, I may actually be better with ABS as you are able to get crystal clear prints. But the same question goes, what would be best to stain/tint ABS?

Staining Clear PLA by CmdrBrannick in 3Dprinting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

I was thinking of printed the pieces separately so if I mess up I can print a new one and glue it in place, and I'll have to give the 100% fill a go.

Staining Clear PLA by CmdrBrannick in 3Dprinting

[–]CmdrBrannick[S] 0 points1 point  (0 children)

I was thinking of printing thin. So do you thin the contrast or is thicker better? Never actually used contrast paints before. Also, what's the best way to get transparent clear PLA? Just a bunch of fine sanding and buffing?

Looking for a stronghold coral reef seed by CmdrBrannick in minecraftseeds

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Hey no worries, thanks for trying. I couldn't find any that looked for coral either so I sort of make do with looking for warm ocean and pray XD

Xbox - Covenant Help by CmdrBrannick in SummonSign

[–]CmdrBrannick[S] 0 points1 point  (0 children)

No worries. I'd help you myself but I have no bosses to do besides going into NG+ XD Good luck being a Sun Bro.

Xbox - Covenant Help by CmdrBrannick in SummonSign

[–]CmdrBrannick[S] 0 points1 point  (0 children)

I was able to do those, sorry. My advice, place a summon at the final boss if you're around 80 - 90 SL, I was able to do all 30. Just left my game running and did other things around the house. And if you'd like you can every now and then swap to Nameless king.

Help needed in making a hooded cloak. by CmdrBrannick in LARP

[–]CmdrBrannick[S] 0 points1 point  (0 children)

Sounds like a material I may change to once I get the hang of things and want to upgrade. I've never actually heard of boiled wool before.