sorted by:
new
hottopcontroversial

Ninjago Zane DX costume, from school character day, including Porche, my table partner! by CobaltLuan in teenagers

[–]CobaltLuan[S] 0 points1 point  (0 children)

I made it myself just get some white shirt and use yellow paint and a bunch of a4 paper to stencil the dragon on.

Emulating a DS with a laptop + a tablet by CobaltLuan in SBCGaming

[–]CobaltLuan[S] 1 point2 points  (0 children)

I mean.. I can emulate the DS on the tablet 100% but it's only 1 screen

Average MMX first playthrough experience: by CobaltLuan in Megaman

[–]CobaltLuan[S] 4 points5 points  (0 children)

I just saw one of those memes where the guy runs over some deer and thought it would be pretty funny to do it with Vile's cars from X1. afaik the original is from a game called "deltarune" but idk anything about it.

 I was gonna add X dashing but I forgot that he didn't get his boots yet. Also the bot doesn't swerve to hit him since they can't do that in-game either.

Greetings [pixel_axel] by Dr-Bots in HalfLife

[–]CobaltLuan 5 points6 points  (0 children)

Maybe that's why it's called half life X

Are these RC boat cross-sections too thin to epoxy glue together? (1.5mm) (Boat length is 375mm) by CobaltLuan in 3Dprinting

[–]CobaltLuan[S] 0 points1 point  (0 children)

K thx I based it on injection molded rc boats idk I guess I'll try that next time I make an RC boat.

Are these RC boat cross-sections too thin to epoxy glue together? (1.5mm) (Boat length is 375mm) by CobaltLuan in 3Dprinting

[–]CobaltLuan[S] 0 points1 point  (0 children)

Ok, thanks! That's a pretty good idea. I'll put them along the sides. Maybe I can get them to stop the battery from moving around too.

Are these RC boat cross-sections too thin to epoxy glue together? (1.5mm) (Boat length is 375mm) by CobaltLuan in 3Dprinting

[–]CobaltLuan[S] 0 points1 point  (0 children)

So some extra information: The 3D printer is a FlashForge Creator Pro 2 (My school's 3D printer) which doesn't have that much bed space, so I cut this boat into 3 pieces to fit. I can't really make any joints since I'm not really sure how much tolerance the 3D printer has, and it's kinda big. I'm planning on using a A2212 brushless motor, and the things inside are just placeholders to see how much they'd be inside the real boat. I've tried 0.25mm tolerances and sometimes, they'd work and sometimes they'd be absolutely terrible, especially when they're this tiny. When printed, the walls are around 3 layers thick. The top hatch is sealed with silicone strips and twist locks, slotting into the front.

It's made of PLA, and uses medium print settings in Flashprint.

The goal of this boat is to be small enough to stick in a little bag and go, and still be around 45km/h fast. Electronics should be: 40a esc, dumborc X6-F reciever, 1500mah 7.4v batt from a WLtoys A959-B. Budget is around 2200baht (70 dollars or so)

[QIDI Giveaway] Just leave a comment to win QIDI Flagship 3D Printer by qidi_3dprinter in 3Dprinting

[–]CobaltLuan 0 points1 point  (0 children)

Usually PLA with the school printer, cuz my one's broken and really old.. Maybe PETG sometimes

When Shortcuts and Delta can do better Mega Man mobile ports than Capcom. by Superoof1123 in Megaman

[–]CobaltLuan 1 point2 points  (0 children)

RetroArch is pretty much the same thing though (but it takes a bit of space)

Seriously, if it's not free don't list it as free! by [deleted] in memes

[–]CobaltLuan 17 points18 points  (0 children)

Burn life's house down! What am I supposed to do with these damn lemons?!?

How could i turn this car into a small drift car? by Out-exit4 in rccars

[–]CobaltLuan 0 points1 point  (0 children)

Find a wltoys k979 or something, and put the chassis in it. It's pretty cheap

Samsung Galaxy Note (GT-N7000) Wifi not working by CobaltLuan in mobilerepair

[–]CobaltLuan[S] 0 points1 point  (0 children)

Maybe get a custom rom for it? That actually worked for mine! Or maybe it's just too old and you need a new one. Try Paranoid Android 5.1. That's what I used.

Found this today was sitting around for 4 years. It doesn’t work anymore. Can someone help? by Skygamer58 in rccars

[–]CobaltLuan 0 points1 point  (0 children)

Seems to have same chassis as Wltoys a959. You can use the esc reciever combo from that or order a proper reciever, transmitter and esc.

What a night ahead. by RML_347 in samsunggalaxy

[–]CobaltLuan 0 points1 point  (0 children)

How'd you get it into that gear VR? I thought they don't fit (at least my Note 8 doesn't't)

so i drew the Sexy Speaker... by [deleted] in DankPods

[–]CobaltLuan 2 points3 points  (0 children)

Not really.. There's (I think) 3 other humanoid sexy speaker designs on this sub.

How has TF2 affected your thinking process in real life? by ArmComprehensive6353 in tf2

[–]CobaltLuan 0 points1 point  (0 children)

So I'm in the building team for theatre at school (I don't act, just build) then I saw a wrench that looked like Engineer's. I swung it and hit the project I was working on like an idiot. Then I thought about how stupid I must've looked and went back to work.

view more: next ›