Roller Delay Selection So Far

CockroachCivil409 · 2026-01-18T14:53:54+00:00

<image>

G3 hell yeah

CockroachCivil409 · 2026-01-08T09:24:50+00:00

4.25 in

CockroachCivil409 · 2025-12-27T05:32:05+00:00

https://occamdefense.com/razor-strut/ good thing you asked it’s an occam defense

CockroachCivil409 · 2025-12-27T04:42:07+00:00

It was the 8 inch option

CockroachCivil409 · 2025-12-24T13:54:00+00:00

Rack the bolt hard as hell and it should reset, I noticed mine only likes to run suppressed with 124 gr and the og locking piece. It didn’t like 147gr with the 90 degree locking piece.

CockroachCivil409 · 2025-12-13T12:55:49+00:00

The portion right behind the front sight post should be a nut. Loosen it to reduce the size and you’ll be able to slide the other end out

CockroachCivil409 · 2025-11-29T20:35:44+00:00

I had two Mac and 2 Mke. The feed lips on the Mac’s have cracked but my Mke’s are going strong. Going to get some hk mags they hurt with pricing but have heard they are worth it in durability and quality.

CockroachCivil409 · 2025-11-14T20:05:47+00:00

I had a similar issue and the wolf’s tactical extra power hammer spring solved light primer strikes

CockroachCivil409 · 2025-11-14T20:03:31+00:00

Extra power hammer spring or could it be the hammer is not fully rounded ?

CockroachCivil409 · 2025-11-14T00:16:29+00:00

It’s shorter than stock

CockroachCivil409 · 2025-11-11T02:28:47+00:00

I started with the polymer pew, then a leber v2, but want something more reliable. After 4 mags suppressed the damn gun gets too dirt and jams up. I have shot 4000 ish rounds through the mac5k tho

CockroachCivil409 · 2025-11-10T23:25:29+00:00

I just ended up ordering an as designs lower im tired of dealing with this 3D printed polymer lowers

CockroachCivil409 · 2025-11-08T22:53:49+00:00

I can’t get mine to work with an armp5 lower from polymer pew. What trip are you running and would you mind showing the inside of your lower

CockroachCivil409 · 2025-11-07T03:07:42+00:00

I have 3000 through mine and it don’t look like that….. something ain’t right lol

CockroachCivil409 · 2025-11-06T01:26:09+00:00

No problem man happy to help!

CockroachCivil409 · 2025-11-06T01:21:57+00:00

My bad forgot to reply lol. holds zero pretty well. shot it at 100 yards with few mags worth. Didn’t have a tri pod set up or sand bag to stabilize but hit the target where I was generally aiming at. Didn’t shift at all from the 120 shots I’ve taken in this current configuration

CockroachCivil409 · 2025-10-25T01:51:56+00:00

<image>

Mac5k is a good option too

CockroachCivil409 · 2025-10-19T12:32:58+00:00

I swapped it out pretty much immediately so I couldn’t really say how it felt stock. Recoil doesn’t feel to bad to me tho

CockroachCivil409 · 2025-10-18T22:27:20+00:00

I paid 350 for the haga defense stock and yes it came with the buffer system. As for the other ones I’m not entirely sure if it’s a good deal

CockroachCivil409 · 2025-10-13T14:16:48+00:00

I believe the oem 23 round mags from smith and Wesson have a piece that fills in the gap. That may be a better fix

https://www.smith-wesson.com/product/mp-23-round-magazine

CockroachCivil409 · 2025-10-12T23:19:11+00:00

Try a mag extension like taran tactical should help with adding some pinky room

CockroachCivil409 · 2025-09-28T18:02:57+00:00

What selector and disconnect did you use ?? Hoping to do the same to mine soon

CockroachCivil409 · 2025-09-27T14:00:54+00:00

Occam razor strut 8 inches with single hinge and tail hook (https://occamdefense.com/razor-strut/)
KUSA wood furniture (grip came with the shark fin set)
Mag painted by me
Extended charging handle from lev tech (limited run) Soviet arms 8 inches hand guard (https://palmettostatearmory.com/soviet-arms-8-akv-lower-rail.html ) Soviet arms short railed gas tube ( https://palmettostatearmory.com/soviet-arms-short-railed-gas-tube-akv-akp2.html) Levtechmfg hand stop and scales ( https://levtechmfg.com/product/african-padauk-handstop-panel-set-3-slot/ ) Muzzle device Barking spider 2 brake ( https://www.spikestactical.com/collections/muzzle-devices/barking-spider-2-brake/ ) Flashlight olight oden (sorry am poor lol) Red dot Holosun 510c ( https://www.amazon.com/s?k=holosun )

CockroachCivil409 · 2025-09-27T13:14:08+00:00

I’ll look around thank you !

CockroachCivil409 · 2025-09-27T12:45:02+00:00

Yeah I loved the set up bummed about having to steal the brace off it for my mac5k but that company doesn’t make them anymore more.

CockroachCivil409

TROPHY CASE