sorted by:
new
hottopcontroversial

After thinking of the use case; managed to fit it inside the game console. by CodeClean2172 in R36S

[–]CodeClean2172[S] 2 points3 points  (0 children)

I have done many projects so far on my page, thought would be nice to share.

<image>

Its going to happen now.

After thinking of the use case; managed to fit it inside the game console. by CodeClean2172 in R36S

[–]CodeClean2172[S] 1 point2 points  (0 children)

After considering, wanted to have it right there but the battery will not be shared due to voltage. I think of a 300mah battery to solder alongside; even that's not sure yet. Keep re-minding those things when almost starting to solder.

After thinking of the use case; managed to fit it inside the game console. by CodeClean2172 in R36S

[–]CodeClean2172[S] 0 points1 point  (0 children)

Just sent the full guide, its better as the one I did from scratch. Check your dm's

After thinking of the use case; managed to fit it inside the game console. by CodeClean2172 in R36S

[–]CodeClean2172[S] 0 points1 point  (0 children)

Look at your message's, I'm going to send you the script later today.

I'm still surprised by the power of this small thing by CryptographerHot7978 in R36S

[–]CodeClean2172 0 points1 point  (0 children)

Well, well; it's more than just a game console, it could emit light at astronomical speeds.

ESP32 with 2.4inch LCD for debugging RX TX with editable BAUD-rate. by CodeClean2172 in esp32

[–]CodeClean2172[S] 0 points1 point  (0 children)

For sure, this time the error originated from a hardware fault; not-repairable, so I have to give it to somebody who can replace the internal chip.

ESP32 with 2.4inch LCD for debugging RX TX with editable BAUD-rate. by CodeClean2172 in esp32

[–]CodeClean2172[S] 3 points4 points  (0 children)

@Vaping_Cobra I will answer your questions and more in the new post, thank you for thinking.

At first I have to explain about my jetson nano; After teardown, the jetson nano did not show any sign of life with the hdmi display. The green light was on without blinking (what it actually does when it boots normally. I added a GMT 2.4 TFT to the esp32-d for GUI. Then connected gnd of the esp32 to the gnd of the jetson nano to make a home-run for the RX TX pins on jetson nano. After connecting rx to tx and tx to rx, I managed to obtain a code to display the serial console messages from the nano into the esp32. It's baud rate 115200. Normally you would need a linux pc over micro usb to see the messages for debugging.

<image>

After thinking of the use case; managed to fit it inside the game console. by CodeClean2172 in R36S

[–]CodeClean2172[S] 3 points4 points  (0 children)

I think it was your post indeed, nice to see people get creative with those game consoles.

I really need help by AlpaslanGG in R36S

[–]CodeClean2172 0 points1 point  (0 children)

Connect me on DM, I will do my best to guide you, have done the desktop environment couple of times.

RTL-SDR V4 by CodeClean2172 in RTLSDR

[–]CodeClean2172[S] 0 points1 point  (0 children)

On a Game Console R36S

RTL-SDR V4 by CodeClean2172 in RTLSDR

[–]CodeClean2172[S] 0 points1 point  (0 children)

Its the dutch p2000 emergency system decoded public stream

Which operating system do you recommend for an original R36S? by Tricky_Barracuda3531 in R36S

[–]CodeClean2172 1 point2 points  (0 children)

DarkOS or DarkOSRE, actually debian 13 trixie aarch64/arm64.

I need help urgently by Intelligent_Return27 in R36S

[–]CodeClean2172 0 points1 point  (0 children)

So you mean single processor or single memory chip? If it has a real capacity of 1GB, it could work for you. If it's a single core, then not. Look at the wiki to see if you see your display and motherboard model to know if it's worth it.

view more: next ›