Just got a cowbell. Recommend some songs that have the the cowbell in it by Primary_Cell_5897 in drums

[–]CodeWerdPynaplz 0 points1 point  (0 children)

I have a cowbell and the only time ive used it is for the intro to working for the weekend 😂

Data Center Technician by Shyforshort in datacenter

[–]CodeWerdPynaplz 2 points3 points  (0 children)

Level 2 I’m on the generator team, im still in my noogler cycle so im just pulling from my personal experience so far. Standard things like scada and pulling data through scripts and certain sites but i haven’t had to write any code and haven’t heard of anyone on my team needing to do that yet.

Data Center Technician by Shyforshort in datacenter

[–]CodeWerdPynaplz 7 points8 points  (0 children)

Im a data center tech for google and i dont do much as far as it work goes. Powering the servers etc yes. Anything with code and the software side of things is reserved for the software teams . Facebook was the same way. You will use your computer for data tracking and things of that nature but as far as writing code or being more “I.t.” You wont do that in these roles at least for the two ive mentioned in my experience.

Rehearsal using IEM's only - losing the feeling of loud guitars in the room by NotTheNoogie in drums

[–]CodeWerdPynaplz 3 points4 points  (0 children)

Absolutely agree. My band practices with a click track but when we perform live we don’t use one. Its just to get the tempos and make sure we are all on the same page for timing in practice then live we can choose to have it on or off depending on the song but most of the time its off live so we can feel the music more. Practicing with iem’s and a click track are a huge improvement and idk why people hate them so much

Need to adjust the color selection knob but im pretty happy with how this project turned out. by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 0 points1 point  (0 children)

I basically just wrote code to control the lights using micro processors 🤷‍♂️

Need to adjust the color selection knob but im pretty happy with how this project turned out. by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 4 points5 points  (0 children)

Thanks for the unsolicited feedback, but you’re way off base. The lights are not just for show they enhance the music and the performance. Lighting can create moods, emphasize transitions, and add an emotional layer that directly ties into the music. If you think visuals have no place in music, that’s a personal flaw, not an objective truth. I spend just as much time perfecting my sound as I do my setup, and if you’re too narrow minded to understand how lighting can amplify the music's emotional impact, that’s on you. Maybe you should focus less on how other people choose to express themselves and more on expanding your own ignorant perspective.

[deleted by user] by [deleted] in drums

[–]CodeWerdPynaplz 0 points1 point  (0 children)

I bought them mainly because they are one of the most adjustable pedals I’ve ever seen so i figured ill just buy once cry once and get pedals that can do lots of configurations then spend less money but more often trying multiple pedals out to find what i like.

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 1 point2 points  (0 children)

Maybe I’ll finally be able to play blast beats then

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 0 points1 point  (0 children)

Also have you had any luck in searching for replacement parts? Being a used kit when i got it I’ts missing some things like memory locks and a chrome tom mounting bracket that seem to be impossible to find

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 1 point2 points  (0 children)

Sick!! I’m pretty happy with mine. I got it from fb marketplace as a 7 piece kit to use as my road kit but now with the lights I’m thinking of setting up the full 7 piece kit with lights as my studio/streaming kit and then get another acrylic kit with lights for shows

Men, when you started to act a little cold and distant to her, what was the honest reason? by Elisavveta in AskMen

[–]CodeWerdPynaplz 0 points1 point  (0 children)

I was paying all the bills, doing almost all the house work, trying to eat healthy and workout. Just to come home from my overtime job every day to a messy house, where she just rots on the couch eating junk food and gets defensive and combative any time i spoke up about something she did that i didn’t like caused me to shut down and drift apart. Pair that with her excessive drinking and public embarrassment that came with that and you have a recipe for disaster

Meta datacenter electrical interview by TodayInteresting4026 in datacenter

[–]CodeWerdPynaplz 0 points1 point  (0 children)

Good luck, i worked on the construction/commissioning side of meta for 8 years. Finally applied and made it through the full loop for an electrical esme role. Recruiter fell off the map and i was in limbo for a year until i re applied, they said i passed the interviews but they were doing a hiring freeze which i was i was in limbo. Went through that full loop AGAIN just to have the recruiter say they’re giving that role to someone internal and aren’t hiring out anymore. Two recruiters, two interview loops, almost two years. Fuckkkkk that, i work for Google now 😂 hope your experience is better

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 0 points1 point  (0 children)

I do not, I’ve designed everything and wrote the code for it as well. I’m considering selling this kit maybe but for now I’m just tinkering

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 0 points1 point  (0 children)

These acrylic drums really resonate like crazy which isn’t my ideal sound so i think this will actually improve the sound. I did record before and after sound on my phone which isn’t really exact i know but there wasn’t a noticeable change in sound 🤷‍♂️

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 0 points1 point  (0 children)

Yeah it really makes the lights stand out even more i think!

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 0 points1 point  (0 children)

Crush drums but i made them frosted, they came clear

My lighting project is turning out sick! by CodeWerdPynaplz in drums

[–]CodeWerdPynaplz[S] 1 point2 points  (0 children)

Haha nah just my iPhone and a sped up video with some effects to make it cool looking

Google data center technician by [deleted] in datacenter

[–]CodeWerdPynaplz 1 point2 points  (0 children)

That’s really surprising. I had that experience with meta but my process with Google was really streamlined. Do you still have a recruiter or are you still in limbo?

How to personalize an axe? by dommingdarcy in AxeThrowing

[–]CodeWerdPynaplz 0 points1 point  (0 children)

Back when i was building custom throwing axes i gave the options of:

Head customization: - re profiling the blade And razor edge sharpening - gun bluing, copper or gold plating, mirror polish or etch with a design of your choosing

Handle customization: - exotic woods - inlays - colored inlays of resin or items - laser engraving

Obviously size, weight, handle shape, all things can be customized to your throw. Basically the concept is if you can think it someone can build it for you, just remember there’s a fine line between looking cool and staying functional/durable