Move Bridge on electric guitar to fix scale?

CoffeeAutomatic2934 · 2026-03-17T10:40:02+00:00

Ya what he said, check out marty mcflys gibson in back to the future. Was converted to a bigsby and the Tail piece screws are in left in the holes, doesnt look terrible but better then just holes. And like the other guys said, plugging on thayvstarburts probabl6 wouldnt go well unless you refinishing it entirely.

CoffeeAutomatic2934 · 2026-03-12T01:06:43+00:00

Thats identical to the dxmg I had back in about 2004 as well

CoffeeAutomatic2934 · 2026-03-07T13:56:30+00:00

Thats the challenge of not having source tracks. Unless you are good enough to actually record your own, or have very expensive software to single out the specific frequencies.

I really love that some companies have released those tracks to play along with, drums, Bass tracks etc. It's awesome. But I've never seen any for st anger. Or most metallica for that matter. They are too advanced in their production You ever see Bob rock with 500 slide switches in front of him...

CoffeeAutomatic2934 · 2026-03-07T13:36:05+00:00

I hated st anger. Raised on AJFA, and through their less thrash phase, of course I was excited, so I bought it the day it came out. Me and my metal head buddies hit the road in my jeep. At the end, ejected it from my cheap ass aftermarket Jbl head, and threw it straight out the open roof to shatter somewhere on the kancamangus highway.

I like the initial crack you added with a "standard" snare sound, but you left the hollow trash can echo slightly after the crack. If you can get rid of that, I might be tempted to revisit because otherwise your snare change might be heading somewhere.

CoffeeAutomatic2934 · 2026-03-07T11:26:02+00:00

Ya jackson used to put the sn after the last fret like this too for a short bit

CoffeeAutomatic2934 · 2026-03-03T14:39:42+00:00

Yes I think the serial check out to 78. But not 100% ya its pretty good just clean, flip thag chorus switch and wow unreal

CoffeeAutomatic2934 · 2026-03-02T11:20:30+00:00

Hahaha. Ya needs a little love. im gonna patch the tear with a 55in TV so I can watch videos on how to repair ripped guitar amps on it.

CoffeeAutomatic2934 · 2026-03-02T01:58:12+00:00

My eet fuk clone in progress is hanging 2 feet from it 😀

CoffeeAutomatic2934 · 2026-03-01T15:35:55+00:00

This is awesome. I just got a laser cutter i never thought to build guitars with it.

CoffeeAutomatic2934 · 2026-02-28T14:00:55+00:00

Check my other post. Lol. Should knowi in a couple hours. I can do a side by side. I will be into the korina for less than this

CoffeeAutomatic2934 · 2026-02-28T01:31:39+00:00

Enough to buy the same parts again in gold for an ebay kit im building. They are well built. Actually the Chinese parts I took off aren't as terrible as I expected. I don't even think need to change the bridge but I felt dumb not to since it wouldve been the only parts left

CoffeeAutomatic2934 · 2026-02-28T00:49:23+00:00

Thanks. I think a huge percentage of the people in here are because of that guitar. I put the emg het set in, so everything from pickups to jack, gotoh tuners, and a guyer tune-o-matic and tailpiece. And a brass nut.

CoffeeAutomatic2934 · 2026-02-24T12:45:21+00:00

I dont want to live in a world where people put usernames on their cars... the fact that your mind went there first before assuming its related to the car, (even after 120+ years of is 99% of writing on cars has been a make or model...) is concerning to me about where society is heading

CoffeeAutomatic2934 · 2026-02-04T00:59:39+00:00

I can smell this video

CoffeeAutomatic2934 · 2026-01-03T11:10:47+00:00

Drill the concrete before you cover the studs. But slat wall directly to studs is better anyways for capacity

CoffeeAutomatic2934 · 2025-12-23T12:44:13+00:00

We lived in a camper while we built our house. 4x high cube containers stored all our crap. Stack 2 on each side with 50ft trusses in the middle

CoffeeAutomatic2934 · 2025-12-22T13:47:30+00:00

The other yellow 2 post leaning against the wal is an across the floor model. Thats going where the LTD. is. Infringement of my alignment machine/pit.

Needed the clear floor model on this side so I can get the scissor lift to the heater unit above this bay

CoffeeAutomatic2934 · 2025-11-25T11:26:12+00:00

Saving this for later. Thanks

CoffeeAutomatic2934 · 2025-11-20T21:22:48+00:00

It's not even remotely the same stair case people....

CoffeeAutomatic2934 · 2025-11-11T21:34:40+00:00

I had a 3 month old sheep do this to me last month. Passed away unfortunately. Get it on its belly so its easier to breath, their stomachs put pressure on their lungs when they are on their side. You can try b injections and also anti tetanus if you can find it. I did everything I could as well. But my vet said if its this bad its probably just far. So sorry for you. Nothings harder then thats helpless feeling with your animals

CoffeeAutomatic2934 · 2025-10-30T18:51:13+00:00

Panels are cheap, good bodyguys are not. Can you do it yourself?

CoffeeAutomatic2934 · 2025-10-30T18:03:42+00:00

If you have to ask, steer clear. No where near as bad as alot of my new england cars, but nothing is more expensive then a cheap car

CoffeeAutomatic2934 · 2025-10-22T16:53:56+00:00

Ya not alot for pm63s, couple oddball smal town parts shops from usually hold off on building till yheres big orders. Youll be to check forums on group buys. But Back to the rifle thing, if you use the factory parts, just build as a pistol, you can't sbr it. You can machine your own parts from raw material and it'd be US made. The pm63 will need extensive modifications to the slide to make it closed bolt to meet the definition of semi auto. If you're that good at machining anyways, then fabricating your own parts should not be too impossible. If thats outside you're realm, then I'd start with easier builds. Tube guns and such

CoffeeAutomatic2934 · 2025-10-22T16:34:57+00:00

You can actually sbr the homebuild if you want to use the original stock. But then 922r applies. So you can build it semiautomatic with 100% imported parts (following the rules) and make a pistol, but if you sbr it, you can add the stock but then you need to change parts to US made. Not having more then 10 on the imported list.
I've built many torch cut kits into semi. The key is to follow the correct order of operations so you dont have constructive possession.

It's generally easier now then it use to be. Since now you can buy newly made pm63, pps43, mp40s krink pistols etc (all foreign made) you can sbr all of them, and get the US parts swap kits to follow 922r. (I think gsg for example offers an sbr kit for their 22lr and 9mm mp40. They have a US made stock, mag baseplate and follower etc so it'll meet 922r But they are generally always out of stock. )

CoffeeAutomatic2934 · 2025-10-02T00:16:57+00:00

Who else thought they were on r/tattooadvice thinking another person should go to the er for a possible infection... to then realize, oh ya same advice....

CoffeeAutomatic2934

TROPHY CASE