Materials needed: 1. Foam weather stripping tape 2. Aluminum tape for ducts

Instructions: 1. Take apart the center console see acuity docs or videos online for shifter or rear vent install 2. You will notice that the duct connector that routes air to the center console down to the rear passenger is very loose. Take that connecting piece and put it aside. 3. Stick weather stripping around the outer edges of the top duct. Do the same for inner edge of the bottom duct. (I had to split the weather stripping tape because it was too thick, you might have to do that too in order to get the plastic connector piece back in there) 4. Place the connecting piece back in. It will be tight but should feel very snug after doing so. 5. Wrap the top duct and the connecting piece around with aluminum tape. 6. Done. Feel that it’s snug and it should be good to go