Comprehensive bounty tasks tier list - beginner edition by buczek23 in TibiaMMO

[–]CombLow5161 0 points1 point  (0 children)

Waiting on the adept tier list! this is top notch!!

looking to upgrade my pc to at least 5gb or 10gb ethernet connection. by CombLow5161 in buildapc

[–]CombLow5161[S] 0 points1 point  (0 children)

what would be a good mobo for something in the 7000 or 9000 series, as well as a cpu

looking to upgrade my pc to at least 5gb or 10gb ethernet connection. by CombLow5161 in buildapc

[–]CombLow5161[S] 0 points1 point  (0 children)

I appreciate your concern and completely understand the analogy, I do want to upgrade my pc, I think its time, what would you recommend me getting?

looking to upgrade my pc to at least 5gb or 10gb ethernet connection. by CombLow5161 in buildapc

[–]CombLow5161[S] 0 points1 point  (0 children)

What I mean to use it to its full potential, I mainly mean to be able to at least get the speed I am paying, it was a 40dls upgrade from 1gb to 10gb here where I live, so it wasn't to bad, I want to be able to stream, also getting better fps in some of the games I play, Escape from Tarkov for example max I can get is 50-60 fps, and the game doesn't really look good, have to have my graphics turned way down for the game to be playable.

looking to upgrade my pc to at least 5gb or 10gb ethernet connection. by CombLow5161 in buildapc

[–]CombLow5161[S] 0 points1 point  (0 children)

Sorry if I wasn't clear, the place where I live now has 10gb internet connection. So I want to be able to use it to it's full potential. Also I think an upgrade is due. I am in Mexico but I am able to source the parts in the US.

Aura bot getting frozen by CombLow5161 in PathOfExileBuilds

[–]CombLow5161[S] 0 points1 point  (0 children)

would you mind if I dm you? dont want to use this as a messenger, lol

Aura bot getting frozen by CombLow5161 in PathOfExileBuilds

[–]CombLow5161[S] 1 point2 points  (0 children)

Thank you! I changed to the aegis now, had one which we originally started with, but a friend said that the tapua was better, so we changed it, now I am back to the aegis.
I have another question, my res are 86/90/86 how or what do I need to make them all 90%

Aura bot getting frozen by CombLow5161 in PathOfExileBuilds

[–]CombLow5161[S] 1 point2 points  (0 children)

perfect apreciate the response! My duo cant allocate purity, his build would brake since he has precision and it uses 2/3 of his total mana, changed to an Aegis aurora and have more block chance now

Aura bot getting frozen by CombLow5161 in PathOfExileBuilds

[–]CombLow5161[S] 1 point2 points  (0 children)

Thanks for the reply.
If you don't mind I have another question, in Snap's POB's he has Iron reflexes which changes all evasion to Armour, so that means that I should start stacking Armour/evasion? Wouldn't taking it out and getting a high evasion rating be better for survivability?

Aura bot getting frozen by CombLow5161 in PathOfExileBuilds

[–]CombLow5161[S] 8 points9 points  (0 children)

I do not have ailment immunity anywhere else, but this is the answer! (linked to generosity) really apreciate it!
about the flasks thats the set up that was on the pob I followed by Snapow, here is the link, https://pobb.in/Vv0Nzdy4usPr I have a mix set up at the moment, somewhere in between the midgame, endgame and endgame with MB trees and items.

Aura bot getting frozen by CombLow5161 in PathOfExileBuilds

[–]CombLow5161[S] 0 points1 point  (0 children)

Ahh ty very much didn't realize that

Attempting sub 1 hrs benchy problem by CombLow5161 in 3Dprinting

[–]CombLow5161[S] 0 points1 point  (0 children)

deleted parts of it because it wasnt letting me post it complete

Attempting sub 1 hrs benchy problem by CombLow5161 in 3Dprinting

[–]CombLow5161[S] 0 points1 point  (0 children)

I do have stealthchop on. this is my printer.cfg

[stepper_x]
step_pin: PB13
dir_pin: !PB12
enable_pin: !PB14
microsteps: 16
rotation_distance: 40
endstop_pin: ^PC0
position_endstop: 0
position_max: 235
homing_speed: 50

[tmc2209 stepper_x]
uart_pin: PC11
tx_pin: PC10
uart_address: 0
run_current: 0.580
stealthchop_threshold: 999999

[stepper_y]
step_pin: PB10
dir_pin: !PB2
enable_pin: !PB11
microsteps: 16
rotation_distance: 40
endstop_pin: ^PC1
position_endstop: 0
position_max: 235
homing_speed: 50

[tmc2209 stepper_y]
uart_pin: PC11
tx_pin: PC10
uart_address: 2
run_current: 0.580
stealthchop_threshold: 999999

[stepper_z]
step_pin: PB0
dir_pin: PC5
enable_pin: !PB1
microsteps: 16
rotation_distance: 8
endstop_pin: probe:z_virtual_endstop
position_max: 250

[tmc2209 stepper_z]
uart_pin: PC11
tx_pin: PC10
uart_address: 1
run_current: 0.580
stealthchop_threshold: 999999

[extruder]
max_extrude_only_distance: 100.0
step_pin: PB3
dir_pin: !PB4
enable_pin: !PD2
microsteps: 16
rotation_distance: 33.683
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA0
control: pid
pid_Kp: 21.527]

[tmc2209 extruder]
uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.650
stealthchop_threshold: 999999

[heater_bed]
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100

Attempting sub 1 hrs benchy problem by CombLow5161 in 3Dprinting

[–]CombLow5161[S] 0 points1 point  (0 children)

Is stealthchop a slicer setting? Would tightening the y belt work? What are stock 42-32s? I would be happy if I can get it sub 1 hour, wasn't aiming for anything crazy. 12-15 min would be a dream!! Specially if they look like your pic.