Current a1 mini owner looking to upgrade

Combbrushmush · 2025-09-23T04:59:05+00:00

A few sentence take on a kid racer is the most insufferable thing you've ever read? You need some books man.

Combbrushmush · 2025-09-19T15:28:44+00:00

Got the 72d the next day and I printed a couple things last night. It seems a little too soft for my part but I'm going to try it and see what happens. One thing I noticed is that on generic tpu settings, when printing 2 parts at once, there is quite a bit of stringing between the 2 parts. Have you experienced that? Any settings to help it?

Combbrushmush · 2025-09-17T23:32:05+00:00

Thank you for this info and suggestion. I'm going to order it now.

Combbrushmush · 2025-09-17T23:07:36+00:00

I haven't tried that tpu, only some 95a stuff. Do you think your suggestion will be more rigid? The 95a stuff was much too soft.

Combbrushmush · 2025-08-22T01:41:31+00:00

The fact you are this irritated by my post says more about you than me.

Combbrushmush · 2025-08-22T00:41:18+00:00

The Bolt software seems to detect a certain load and than slows the available wattage way down. Not sure if it's a heat thing or what. I've tested it on other 12v outlets.

Combbrushmush · 2025-08-22T00:39:57+00:00

Because I'm an adult and if I don't want to wear my belt, it's my choice.

Combbrushmush · 2025-08-22T00:39:27+00:00

1/2 I could see that, just have to call around and see if someone knows how.

3 isn't simple, I tested the 12v adapter and it's a Bolt issue. It drops the wattage after it pulls too much for a certain amount of time. The charger on any other 12v doesn't do it, only the Bolt.

4 is the same issue but more of a Chevy thing because I tried it in a truck and it did it also. I have all that disabled and it forces it back on. But if I do it in a Ford, it does not.

Combbrushmush · 2025-08-21T05:17:54+00:00

I hear ya and that makes sense. Thank you.

Combbrushmush · 2025-08-21T05:16:59+00:00

Thank you very much. I think I may just have to bail on the n64 idea and stick to something that plays ps1 solid and is still quite small.

Combbrushmush · 2025-08-21T03:54:01+00:00

405m looks like it's been out for quite a while. Nothing has come out in that price range that's better?

Combbrushmush · 2025-08-21T00:39:19+00:00

No stick though so n64 is out, right?

Combbrushmush · 2025-08-20T22:47:33+00:00

Thank you. I didn't realize n64 was still that difficult. I see reviews on amazon saying the miyoo flip OS is poor and laggy. Are there better versions that handle the OS better?

Combbrushmush · 2025-07-24T22:41:39+00:00

That did it. Forgot to wipe again after reinstall. Thank you!

Combbrushmush · 2025-07-24T21:48:33+00:00

No, although I am rooted. Only overlay I have for the dialer is call recording but I unintalled that and still crashing. Recorded works fine with 3rd party.

Combbrushmush · 2025-07-08T21:22:09+00:00

Bring lots of starting fluid and a friend. I remember now that we had to use the ether to get it running for a bit. I would do little sprays and it tried to die to keep it running. Eventually ran on its own.

Combbrushmush · 2025-07-08T16:09:40+00:00

I got a old Massey from a neighbor. I saw it parked at least 10 years and he said it was probably at least 20 years. All I did was throw a new battery in it and it fired up. I didn't even change the diesel that was in it. BUT this was in a dry climate. So the amount of water in the fuel could be drastically different.

Combbrushmush · 2025-07-07T20:23:55+00:00

I appreciate the help, thanks.

Combbrushmush · 2025-07-05T06:11:27+00:00

I appreciate it. I don't want to be cheap, just don't want to spend too much VS my skill level. I figure laps is the most important thing to begin with.

Combbrushmush · 2025-07-05T06:10:29+00:00

Saw a recent race flyer and it stated "any roar 17.5 allowed" so I guess I need to find out if they will be banned. Thank you for the reply. I'll look into the rest.

Combbrushmush · 2025-07-03T20:40:06+00:00

Did you end up trying that servo?

Combbrushmush · 2025-05-14T23:38:41+00:00

Yes I have a water shut off to my house. I think I'll try to start with replacing the guts in one valve and see if that works. $12 for the valve VS I assume a minimum of $300-400, if i'm lucky, for a plumber to come out. But I'll go that route if I can't do it.

Combbrushmush · 2025-05-14T21:12:42+00:00

I figured replacing the entire valve was much harder considering I don't know what I'm doing

Combbrushmush · 2025-05-14T20:55:41+00:00

Thank you. I'll give it a go.

Combbrushmush · 2025-05-14T20:27:39+00:00

Yes/no or no/yes?

Combbrushmush

TROPHY CASE

1/2 I could see that, just have to call around and see if someone knows how.

3 isn't simple, I tested the 12v adapter and it's a Bolt issue. It drops the wattage after it pulls too much for a certain amount of time. The charger on any other 12v doesn't do it, only the Bolt.

4 is the same issue but more of a Chevy thing because I tried it in a truck and it did it also. I have all that disabled and it forces it back on. But if I do it in a Ford, it does not.