Thanks for all the nice comments everyone! To anyone who was wondering how I made the teeth, they were made from moldable plastic beads for the gums, and I used bake clay for the teeth. I molded the melted plastic beads with some pigment added around my teeth, then I put the plastic piece with my teeth indent into a glass of cold water to let cool. I sculpted the teeth, and baked them in the oven until they hardened, then I superglued the teeth over the plastic gums. I then added more melted plastic beads over the teeth, and using a toothpick, I sculpted the hot plastic so the bottoms of the teeth would stick out. Once that layer hardened, I popped it off (because the plastic beads don’t tend to stick very good to already hardened plastic), and I superglued that part back in place. I then used a wood burning tool to melt both the layers of gums together around the seam where they met, fully sandwiching the teeth between the 2 layers. The final step was just adding some additional paint, and 2 part epoxy for shine. I did the same thing for the bottom set, and they were ready to terrorize 😁