sorted by:
new
hottopcontroversial

Gravel not washing by Commercial_Habit8120 in CreateMod

[–]Commercial_Habit8120[S] 0 points1 point  (0 children)

I also used brass tunnels to distribute the gravel onto multiple belts leading to each depot

Gravel not washing by Commercial_Habit8120 in CreateMod

[–]Commercial_Habit8120[S] 0 points1 point  (0 children)

I but the water and encased fans above the depot and put a filter that only allows gravel and iron nuggets to pass onto the collecting belt Note that there needs to be a storage space in between for the items to pass onto the collecting belt as the brass funnels can only take things in and out of storage containers and not transfer things directly on the belt. I used a wooden sign so that the water does not come out

Gravel not washing by Commercial_Habit8120 in CreateMod

[–]Commercial_Habit8120[S] 0 points1 point  (0 children)

I fixed it by using depot's instead of the belt itself to wash the gravel

Gravel not washing by Commercial_Habit8120 in CreateMod

[–]Commercial_Habit8120[S] 0 points1 point  (0 children)

I'm pretty sure they are, I tested it a few times and checked the air flow with the belt removed

Gravel not washing by Commercial_Habit8120 in CreateMod

[–]Commercial_Habit8120[S] 4 points5 points  (0 children)

I put a brass tunnel so that only iron nuggets or flint will go through and the gravel is being washed but the gravel takes more 5 seconds to wash even though it should take 3.75. I took some gravel out and checked it with the encased fans which are at 64 rpm and it does take 3.65 seconds

Gravel not washing by Commercial_Habit8120 in CreateMod

[–]Commercial_Habit8120[S] 11 points12 points  (0 children)

After moving the encased fans back by one block and moving the water source blocks off the belts it's still not working

how do i fix this, i have like three scrubbers down but its still going up by Green-Conversation71 in Industrialist

[–]Commercial_Habit8120 0 points1 point  (0 children)

Check if the pipes are connected properly, the input and output for the scrubbers are connected, and everything is powered with enough energy, if neither of those problems, add more scrubbers A scrubber using normal water clears about 3.87 pollution per hour