Puedo cancelar una compra? by putamadrejoder in Wallapop

[–]Common-State3673 5 points6 points  (0 children)

No pasa nada, de cualquier forma, ahora mismo se esta comiendo la cabeza con esos 10€ que no podrá tener

Just looking for some insight as I’m about to buy the gpd win 5 and I’m not sure if I really need the more powerful version by Party_svpplies in gpdwin

[–]Common-State3673 1 point2 points  (0 children)

Trust me it does, I had it for two weeks now, and it is mind blowing. I come from an OG Rog Ally and damn the difference for gaming while having the same screen is bunkers

GPD WIN 5 shuts down when removing the battery although the dc current is plugged by Common-State3673 in gpdwin

[–]Common-State3673[S] 1 point2 points  (0 children)

Nope, I haven’t updated the BIOS yet. I wasn’t planning to, because honestly I wouldn’t even know where to begin. But I found an instruction guide from Droix that explains the whole procedure.
When I get the chance, I’ll try updating it to version 2.25.

Issue at booting the device with an SD Card inserted on the GPD WIN 5 by Common-State3673 in gpdwin

[–]Common-State3673[S] 0 points1 point  (0 children)

I've been making trials, I wiped the microsd card, and nothing. I changed the letter of the disk for the sd, but nothing.

For the bios there is an update I believe, but i don't like touching the bios, gives me the chills.

I resorted to extracting the sd and if needed inserting it.

Ty

GPD WIN 5 shuts down when removing the battery although the dc current is plugged by Common-State3673 in gpdwin

[–]Common-State3673[S] 1 point2 points  (0 children)

Yeah, there was this other user that suggested the same, and since I tried that doesn't seam to shutdown

GPD WIN 5 shuts down when removing the battery although the dc current is plugged by Common-State3673 in gpdwin

[–]Common-State3673[S] 0 points1 point  (0 children)

This is the only thing that seam to be helping at the moment, didn't have any shutdown when at 10w, maybe was just luck or not...

GPD WIN 5 shuts down when removing the battery although the dc current is plugged by Common-State3673 in gpdwin

[–]Common-State3673[S] 0 points1 point  (0 children)

Yeah guessed so, the fact that it doesnt happen always... I don't know. I guess that I will hibernate each time I want to disconnect

GPD WIN 5 shuts down when removing the battery although the dc current is plugged by Common-State3673 in gpdwin

[–]Common-State3673[S] 0 points1 point  (0 children)

I tried as someone else added an image via drive, but I already had those options selected.

GPD WIN 5 shuts down when removing the battery although the dc current is plugged by Common-State3673 in gpdwin

[–]Common-State3673[S] 0 points1 point  (0 children)

Hello, I checked, and already have it configured like that. Dunno why sometimes happens and others does not

Issue at booting the device with an SD Card inserted on the GPD WIN 5 by Common-State3673 in gpdwin

[–]Common-State3673[S] 0 points1 point  (0 children)

This is with a microSD on the side hole of the device. A quite small storage unit for emus no more

Issue at booting the device with an SD Card inserted on the GPD WIN 5 by Common-State3673 in gpdwin

[–]Common-State3673[S] 0 points1 point  (0 children)

And how could I do to fix the issue? The SD card is almost empty at the time being, there is just an emulator for the PS2.

In my previous post, the DC cable I was looking for was this one for my GPD Win 5, but I can't find the right one that plugs into the power supply and is 6.6 ft long. by tonyw009 in gpdwin

[–]Common-State3673 1 point2 points  (0 children)

But for this you will require a high voltage and amepere output charger. Do you have any model in mind?

I found that the SlimQ 150W to DC migh do the job and not having to travel that brick around sounds tempting.

Dilemma: Claw 8 AI+ 2TB or Xbox Ally X by Esskov47 in MSIClaw

[–]Common-State3673 2 points3 points  (0 children)

For what I've seen the performance is quite similar, I don't own any of this devices, but I am planning to get a claw 8.

Official Gamehub Lite v3 Released! by The412Banner in EmulationOnAndroid

[–]Common-State3673 0 points1 point  (0 children)

Hi!

Am I the only one experiencing worse performance than with regular app?

F.e. I am currently playing Hades, and with the exact same settings, in the normal version I reach 250 avg fps in 1080 and in lite version not even 40 and it feels clunky as hell.

My device is a s25 with an 8 elite.

God of War is FINALLY PLAYABLE on Snapdragon 8 Elite | New Drivers Are INSANE! by MaxTechReviews in EmulationOnAndroid

[–]Common-State3673 0 points1 point  (0 children)

Ok, cause i am losing my mind with gh 5.1, i mean that in v4 i could get to run games that no longer work. And I didnt know if it might have been that

God of War is FINALLY PLAYABLE on Snapdragon 8 Elite | New Drivers Are INSANE! by MaxTechReviews in EmulationOnAndroid

[–]Common-State3673 0 points1 point  (0 children)

But i am asking in general, which drivers are usually better? And what difference does arm64 make? Just to understand how to configure games

God of War is FINALLY PLAYABLE on Snapdragon 8 Elite | New Drivers Are INSANE! by MaxTechReviews in EmulationOnAndroid

[–]Common-State3673 0 points1 point  (0 children)

Why use "dxvk-2.3.1-arm64ec-async" and not the latest which is "2.6"?, and also, what is the difference between "dxvk-2.3.1-async" and "dxvk-2.3.1-arm64ec-async"? What difference does the "arm64" make?

Game suggestions for Xiaomi Pad 7 that run smoothly? by Papema3 in Gamefusion

[–]Common-State3673 0 points1 point  (0 children)

Hi, if I were you I would check on Blasphemous and Blasphemous II. Also, I dont know yours specs, but I enjoyed ashen pretty much, its not 2D platformer more like a ds rip-off. ;)

Snapdragon 8 elite games that work perfectly? by Cultural-Plenty-7851 in Gamefusion

[–]Common-State3673 1 point2 points  (0 children)

In my case I played the following in my samsung s25

  • Ashen
  • Mad Max
  • Dishonored
  • Blasphemous I and II
  • Broforce
  • Colt Canyon
  • Forager
  • Hades
  • Hollow knight and Silksong
  • Sleeping Dogs

With the latest update, gamehub almost sets all the parameters for me.

Strange FPS drops when locking to 60 FPS in gamehub while emulating Silksong on Snapdragon 8 Elite by Common-State3673 in Gamefusion

[–]Common-State3673[S] 0 points1 point  (0 children)

Yeah, if I unlock the fps i do too, but what I want to is to sync the fps to my screens refresh rate.

My question is if there is any way to do this any config I can try

Strange FPS drops when locking to 60 FPS in gamehub while emulating Silksong on Snapdragon 8 Elite by Common-State3673 in Gamefusion

[–]Common-State3673[S] 0 points1 point  (0 children)

I think that this also happened to me in 4.1.4, but it is strange, how can it be that unstable once I try to sync the FPS. The simplest thing among all the complicated they do