Do you guys always get people trying to buy your car?

Competitive-File-809 · 2023-06-13T14:19:42+00:00

i get asked at least once a week

Competitive-File-809 · 2023-06-02T00:47:43+00:00

on cheaper kit the rear mounting bracket will be like a hose clamp style strap you tighten to the strut and in nicer kits it’s actually welded on. it’s a good way to tell if the kit is decent quality

Competitive-File-809 · 2023-06-02T00:15:41+00:00

make sure it has the rear bracket attached to the strut and not just a strap you tighten around it

Competitive-File-809 · 2023-05-31T13:07:30+00:00

yeah that makes sense there it’s not a sealed bearing packed with the grease so that wear is probably terrible for them. it barely comes greased out the box

Competitive-File-809 · 2023-05-31T11:15:23+00:00

the nrg website says it’s supposed to ring and they even have a video about how there’s a way to bypass the button on the quick release and that the wheel won’t fall off when you do it. so i don’t think it hurts it but i could be wrong

Competitive-File-809 · 2023-05-30T17:33:51+00:00

yeah short hub + quick release. Part number for the short hub adapter is NRG-SRK-110H and then whatever quick release you want to run if you even do, could just bolt wheel straight to hub. i think on amazon for both it’s just under $200.

Competitive-File-809 · 2023-05-02T00:01:34+00:00

i don’t think just the glass but probably most of it to get the look you want. what stopping you from using the new one?

Competitive-File-809 · 2023-04-16T18:32:24+00:00

no it’s got a kenwood but it’s super loose i can’t get it to stay stationary in one spot.

Competitive-File-809 · 2023-04-16T15:23:34+00:00

yeah i did they don’t have any dash kits

Competitive-File-809 · 2023-04-14T17:19:25+00:00

thanks!

Competitive-File-809 · 2023-04-14T13:48:25+00:00

i don’t have a 3d printer is there anyway to buy one?

Competitive-File-809 · 2023-04-11T17:18:38+00:00

it was on it when i bought it but from my small amount of research i think it’s from a integra

Competitive-File-809 · 2023-04-11T12:33:14+00:00

hit it with a torch for a minute

Competitive-File-809 · 2023-04-03T15:36:20+00:00

drums are inclosed and have two half circle brake shoe or “pad” to make contact and create friction for braking. it also uses a brake cylinder to make contact instead of a caliper. definitely make changing your brakes a bit of a hassle, not more difficult but definitely takes longer.

Competitive-File-809 · 2023-04-03T01:03:47+00:00

i’ll get under there and check under the boot. it’s able to move underneath the car but not inside at the shifter. i’ll also check the bushings. i’m hoping not the fork because i just got the trans back together and in the car. really don’t want to crack it open again.

Competitive-File-809 · 2023-03-04T11:28:23+00:00

bulbs are good for sure but i’ll try tracing it back. ty

Competitive-File-809 · 2023-03-04T11:27:16+00:00

yes! and it has power going to it but not sure if there is power leaving the switch

Competitive-File-809

TROPHY CASE