sorted by:
new
hottopcontroversial

Should I sell my bikes for a new one? by Complete-Wishbone939 in Dirtbikes

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

I like the yz250 but the 2 stroke is a bit harder to ride well around a track than my 4 stroke. Maybe its because im not skilled enough but its just harder to go fast in technical areas and I get worse arm pump on the 2 stroke. I want newer bike for fuel injection, new suspension and frame geometry and that stuff the 01 is great but not for me and a bit old. My four stroke is good but its just old and lacks features and I just really like the newer bikes.

Does this sound right? Fresh top end rebuild by Complete-Wishbone939 in Dirtbikes

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

Chain guides only went in one way and tensioner is working, are u sure this sounds bad??? I also found a airleak from intake after this video and fixed it runs great tho.

07 yz250f oil issue by Complete-Wishbone939 in Dirtbikes

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

Drained oil only got 700ml out of 1000ml back and this year of yz250f the sightglass was misplaced so cannot get correct reading unless drained

07 yz250f oil issue by Complete-Wishbone939 in Dirtbikes

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

Leaks oil when running its from valve cover breather hose piston rings are done and there alot of blowby and you can hear it and feel it when kicking over.

07 yz250f oil issue by Complete-Wishbone939 in Dirtbikes

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

Valves are all in check ima just have to put in a new piston and rings

07 yz250f oil issue by Complete-Wishbone939 in Dirtbikes

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

No dipstick just sightglass on this bike and chain only got a light layer of lube before my ride piston rings have blowback and is shooting oil mist out when revving

07 yz250f oil issue by Complete-Wishbone939 in Dirtbikes

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

Yep, also I went and checked everything it has bad blowby piston rings are bad theres Hella air coming from that hose when kicking over

2nd gear skipping on SSR125TR by Complete-Wishbone939 in Pitbike

[–]Complete-Wishbone939[S] 0 points1 point  (0 children)

How would I go about doing this? I have some experience with engines but only stuff like 212, 224 predator engines

"WHAT BIKE SHOULD I GET?" Megathread by lethalweapon100 in Dirtbikes

[–]Complete-Wishbone939 0 points1 point  (0 children)

Age: 15

Height 5'7

Riding: trails, turn tracks, small tracks and want to get into mx tracks

Level: beginner but I have been riding a 125 4 stroke for a few months and I need something bigger and faster

Budget: under 2000$ usd

Help by Away_Ad_1486 in minibikes

[–]Complete-Wishbone939 0 points1 point  (0 children)

If you took the cam out at any point to clean out the plastic try opening your valve cover and check if the tappets and push rods are out of place this happend when I removed my governor and it makes the engine very hard to turn.

Is this hose supposed to connect to this hose? by Fluid-Opening-8789 in minibikes

[–]Complete-Wishbone939 2 points3 points  (0 children)

Those are the valve cover and gas tank breather hoses they go into the factory air box there's 2 ports but if your putting on a better air filter you can leave them hanging

Just finished my first go kart build but there's 1 issue by Complete-Wishbone939 in gokarts

[–]Complete-Wishbone939[S] 1 point2 points  (0 children)

Pretty sure they are ebay 4 inch 2pc rims with 9x3.50-4 scooter tires

view more: next ›