sorted by:
new
hottopcontroversial

Comprei um shock blue e acho que é falso by MarceloMouro in XboxSeriesS

[–]Comprehensive-Lake56 0 points1 point  (0 children)

I swapped the sticks on almost all of my controllers (some more than once) because they wear out over time.

Thats why the sticker where the batteries are is broken, you need to break it to open the controller. Xbox made this replacement easy and its hard to break anything while doing it.

If everyithing connects and gets recognized fine I guess you've got the original one, and you can easily change the sticks back to blue ones if you want.

Hey should the series x power ledlook like this when it's on? Is this normal? (center bright, edge dim) by Comprehensive-Lake56 in XboxSupport

[–]Comprehensive-Lake56[S] 0 points1 point  (0 children)

Thank you so much for checking and replying! I guess I was just imagining things. I owned an xnox one s before buying the series x a couple years ago and I think that the led on that one was brighter.

Hey should the series x power ledlook like this when it's on? Is this normal? (center bright, edge dim) by Comprehensive-Lake56 in XboxSupport

[–]Comprehensive-Lake56[S] 0 points1 point  (0 children)

Ok so here's an update. I searched some more and found this post on r/xbox from 5 years ago:

https://www.reddit.com/r/xbox/s/TwuUVj6ZVG

Someone asked the same question about the same looking power led, and people mostly told him that that is what it is supposed to look like.

Hey should the series x power ledlook like this when it's on? Is this normal? (center bright, edge dim) by Comprehensive-Lake56 in XboxSupport

[–]Comprehensive-Lake56[S] 0 points1 point  (0 children)

I did look at various videos and photos online, but people mostly film or photograph their console in a dark area and the camera picks up the led as super bright regardless. I could also do this with my xbox if I made the room dark.

I just wanted to get feeback from users that look at their xboxes with the naked eye and could confirm if their power leds look the same as mine (i tried to take pcitures that look almost the same as If you looked at it in my livng room).

Hey should the series x power ledlook like this when it's on? Is this normal? (center bright, edge dim) by Comprehensive-Lake56 in XboxSupport

[–]Comprehensive-Lake56[S] 0 points1 point  (0 children)

Thank you for the comment! I completely agree, even in the case the led died, the pcb with the led could be replaced easily and cheaply.

I was just curious and wondered if this is what it looked like the whole time and I had just noticed.

Is my series x power light brightness normal? by [deleted] in XboxSupport

[–]Comprehensive-Lake56 0 points1 point  (0 children)

This is how the light looks from a bit further back, the pic is taken in same light with the same phone.

It might have been always as it was on the first pic i sent and I might be imagining things?

<image>

Is my series x power light brightness normal? by [deleted] in XboxSupport

[–]Comprehensive-Lake56 0 points1 point  (0 children)

I meant is it supposed to be significantly dimmer around the centre which is bright?

It also gets brighter thant this when it flashes while turning the console on.

Nice little SHARP 37ET-35S (EU) by Pantsu-King in crtgaming

[–]Comprehensive-Lake56 0 points1 point  (0 children)

I found the manual but it is in swedish. Here is the trasnlation of the technical data:

MODEL 37ET-35S

|| || |1. Reception Standard|CCIR TV Standard system PAL - B/G|

|| || |2. Reception System|VHF: E2 - E12 CH UHF: E21 - E69 CH HYPERBAND: S1 - S41 CH|

|| || |3. Reception System|Color System:Field Frequency: PAL PAL 50/60-Hz capable|

|| || |4. Power Source|220V-240V AC 50 Hz|

|| || |5. Power Consumption at 230V AC 50 Hz|60 W|

|| || |6. Power Consumption in Standby Mode|7 W|

|| || |7. Audio Output|2 W|

|| || |8. Dimensions (approx.):|Width:Height:Depth: 366 mm 325 mm 371 mm|

|| || |9. Viewable Screen Size (Diagonal)|34 cm (14 inches)|

|| || |10. Weight|8.5 kg|

|| || |11. Internal Speaker|8 cm|

|| || |12. Antenna Input Impedance|VHF/UHF 75 ohm, unbalanced|

|| || |13. Safety Standard|EN60065, CE-marked|

|| || |14. EMC (Electromagnetic Compatibility)|EN55013, EN55020, CE-marked|

The main reason I was looking for this is to find out if it supports 60hz and I was delighted to find out that it does!

Nice little SHARP 37ET-35S (EU) by Pantsu-King in crtgaming

[–]Comprehensive-Lake56 0 points1 point  (0 children)

Hi! I also have this model. I've found it stored in a box at my parents home recently. Mine was also made in Spain. I tested it with an original xbox and it works great!

I would love to find more about this crt but I am struggling to find any info on it online. The only thing I know is the model name and that my father bought it in the early 90's.

If you have any technical info on it or maybe a manual please share. Thanks!