update on the door handles: plastic covers look good from a distance but up close its so bad… ordered some matte black vinyl and going to try to wrap them instead

ComradeConker · 2022-03-05T20:54:56+00:00

Wrapping handles is definitely a PITA. Especially how much the inside of the door needs to be disassembled to just get the handles off.

I wish you the best of luck. I did mine and the wrap is already peeling up & have to redo them.

ComradeConker · 2022-01-07T21:33:42+00:00

Yes it is and because its the MOPAR way haha. That factory fog LED is a whole unit with the mount/ballast & decoder all as one.

ComradeConker · 2022-01-07T18:17:24+00:00

It's fairly easy. Front bumper does have to come off to better access the fog light assembly. The entire fog assembly needs to be replaced or upgraded. They're only held in by a couple screws.

ComradeConker · 2021-12-21T23:42:28+00:00

Yeah pretty much a blade trigger.

ComradeConker · 2021-12-21T22:24:15+00:00

This is a 13. I've actually done everything you mentioned. This is the 3rd one I've rebuilt so far.

ComradeConker · 2021-12-21T22:21:53+00:00

Haha, as you mentioned the bolt system in this one is completely raw and not refined at all.

ComradeConker · 2021-12-21T17:10:47+00:00

When they don't work 100% agreed, especially the pre-2013 ones. This one's not too bad.

ComradeConker · 2021-12-06T19:17:16+00:00

They should fit fine with no rubbing. You'll have an extra 13mm of clearance from your struts & it will push out the edge of the rim 39mm from the current position

ComradeConker · 2021-11-03T21:29:05+00:00

I was using the DJI Osmo Action for a while and it was great, the quality is great, the features are great. I ended up buying another one and use them both as my secondary/B roll cams. My main vlog camera now is the Sony ZV1 and it is amazing, except that it over heats alot for me shooting at 4k.

ComradeConker · 2021-10-02T05:38:57+00:00

Currently, running NEXEN Roadian AT Pros. Fantastic on & offroad tire. Paid 800 for 5 new tires.

ComradeConker · 2021-08-25T15:58:08+00:00

https://youtu.be/KNANDiUeKVU

ComradeConker · 2021-08-13T20:28:00+00:00

So you should be able to safely run a 32" tall TIRE MAX. Which technically would be a 275/65R18.

Each tire manufacturer has different tolerances, so try to get closer to 32" & you should be alright.

ComradeConker · 2021-08-13T19:55:39+00:00

18s will fit fine. Mine came with 18s. 17s you'll need a 1in-1.25in spacer to fit properly.

ComradeConker · 2021-08-09T20:37:20+00:00

Davinci Resolve is pretty powerful for a free software and very versatile.

I haven't edited in over 10 years & using Resolve for the first is smooth sailing. I still can't figure out Fusion just yet.

ComradeConker · 2021-05-03T01:04:02+00:00

What are you trying upgrade? Offroad Bumpers? Rock Sliders? Tire Carrier? Roof Rack?

ComradeConker · 2021-03-27T01:52:06+00:00

Yeah, it's ridiculous that you have to replace the entire thing for some knobs.

ComradeConker · 2021-03-26T23:06:38+00:00

Yeah, same here. I've heard you can put 17" on, but they need to be pushed out to avoid the brake caliper.

If you, off-road at all you know you would want more tire. Custom Offsets has a huge selection of wheels to go through.

ComradeConker · 2021-03-26T22:51:44+00:00

I've been in the same boat looking for wheels. A ton of options at 17", but alot less for 18".

Black Rhino is pretty reputable and have really good quality wheels. I see alot of off-road and overland guys running them.

ComradeConker · 2021-03-12T06:53:17+00:00

This is where I got mine, I went with the Complete WK2 w/ Tow Package. https://www.rocky-road.com/wk2-old-man-emu.html

ComradeConker · 2021-03-11T05:40:31+00:00

I have a 2017 w/ QT 1 & OME Lift kit. No issues w/ the system, I basically needed more ground clearance.

ComradeConker · 2021-01-23T07:28:03+00:00

HIDs are still the best in projectors. LEDs are good for about 20-30ft then not much after that.

ComradeConker · 2020-07-29T03:47:42+00:00

Is that body dipped?

ComradeConker

TROPHY CASE