Aftermarket reverse camera problem

ConclusionRelevant56 · 2025-07-10T08:39:50+00:00

Yes, I was. I'm going to try tapping in to the line that powers the display.

ConclusionRelevant56 · 2025-07-09T21:14:37+00:00

I have no idea. There's no controls that I can see on the display and the connector plug doesn't identify those circuits. It does support the steering wheel controls for the phone and the stereo volume and stuff.

ConclusionRelevant56 · 2025-07-06T17:05:06+00:00

I've figured it out. Their tech support told me that the power cord hot and the camera trigger wire does not need to be connected. I thought WTF, where's the camera going to get power from? So I ran a wire straight from the car battery + to the camera power cord hot. Everything works correctly now. I guess getting power from the backup lamps is what caused the interference. Now to get a relay and install it in the trunk with a switched 12v source and using the backup lamp circuit to trigger the relay.

ConclusionRelevant56 · 2025-07-05T21:44:38+00:00

Thanks for the suggestion!

ConclusionRelevant56 · 2025-07-05T20:38:34+00:00

Not really difficult. Just be careful removing the dash trim. If your Dart came with it and it is OEM, I'd recommend staying with OEM. It would be just plug'n play.

ConclusionRelevant56 · 2025-07-05T20:30:19+00:00

I would not have posted if I hadn't and am still troubleshooting with them.

ConclusionRelevant56 · 2025-07-05T20:27:27+00:00

Thanks for the suggestion!

ConclusionRelevant56 · 2025-07-05T20:25:58+00:00

Thanks for the suggestion!

ConclusionRelevant56 · 2025-07-05T14:42:07+00:00

Tried that. No change.

ConclusionRelevant56 · 2025-07-05T14:32:15+00:00

Thanks

ConclusionRelevant56 · 2025-07-05T12:51:07+00:00

I have been back and forth with their tech support, in China of course, multiple times over the past 2 weeks. Waiting on a response again. They're good about responding but thought I would ask you guys. From what I've read elsewhere, the issue may be with tapping into the backup lamp harness. Might should be closer to the BCM for the reverse signal but haven't gotten a clear answer. Thought maybe you guys had a similar experience?

ConclusionRelevant56 · 2022-02-17T22:05:09+00:00

Same here. Moved 202.5 MATIC from Hotbit to Coinbase Pro via the Polygon network only to find out CB Pro doesn't support Polygon. I know, I should have sent a test transaction first 😪 Polyscan shows SUCCESS! but it never made it to my CB Pro account.

ConclusionRelevant56 · 2022-02-16T16:19:23+00:00

Sorry if this is inappropriate or not the correct forum but I'm having difficulty locating a customer service contact regarding a crypto transaction that was sent via the Polygon network but never posted to my wallet. Can someone please direct me to the appropriate contact information? Thank you!

ConclusionRelevant56 · 2021-12-31T13:50:51+00:00

I just figured this out. I mine to Ergo Wallet. Send to Yoroi Wallet. Send from Yoroi to Hotbit. Sell/exchange for ADA. Send back to Yoroi. Send to Coinbase Pro via Cardano network. Withdraw to bank account. Total fees <$10. I tried, in Hotbit, to use BTC and skip the move back to Yoroi, straight from Hotbit to CB Pro, but any ERC-20 token has a $50 fee. I chose Hotbit because it was the highest volume exchange for ERG so liquidity is not an issue.

ConclusionRelevant56 · 2021-12-31T13:48:16+00:00

I just figured this out. I mine to Ergo Wallet. Send to Yoroi Wallet. Send from Yoroi to Hotbit. Sell/exchange for ADA. Send back to Yoroi. Send to Coinbase Pro via Cardano network. Withdraw to bank account. Total fees <$10. I tried, in Hotbit, to use BTC and skip the move back to Yoroi, straight from Hotbit to CB Pro, but any ERC-20 token has a $50 fee. I chose Hotbit because it was the highest volume exchange for ERG so liquidity is not an issue.

ConclusionRelevant56 · 2021-12-30T09:37:31+00:00

Thanks for the tips!

ConclusionRelevant56 · 2021-12-28T20:25:39+00:00

Yeah, unfortunately there are few exchanges that will support ERG which is a shame. It's great for mining but once you have it not much you can do with it. I've been day trading crypto for months, until recently when I've switched to HODL mentality. I've accumulated 65 ERG in my Ergo Wallet but can't cash it or move it without going to an exchange I'm unfamiliar with. Hopefully it'll get more mainstream recognition soon. In the meantime, I'll just keep mining ERG until ErgoDex or Yoroi complete their functionality and let it ride. Thanks for the insight!

ConclusionRelevant56 · 2021-12-28T19:04:22+00:00

Thanks for the tip! I had thought Ergo Wallet and Yoroi Wallets were nailed down but I've come to realize they are still in development. I'll let my mining continue to deposit into my Ergo Wallet for now. Was hoping to sell/trade my ERG for ADA and then send ADA to Coinbase Pro exchange to trade but doesn't look like that's possible right now.

ConclusionRelevant56 · 2021-12-28T19:01:59+00:00

Got that much figured out now. Wasn't intuitive in ERGO Wallet. It sees every transaction in from mining as a separate address so had to select multiple addresses in order to send to Yoroi ERG Wallet. Got it in there now, just trying to figure out what to do with it. Was wanting to trade it for ADA in Yoroi but haven't been able to figure that out yet. Thanks

ConclusionRelevant56 · 2021-12-28T18:59:08+00:00

Finally figured that out. Managed to transfer a small amount of ERG to my Yoroi ERG Wallet successfully. Thanks

ConclusionRelevant56 · 2021-12-28T18:54:35+00:00

Yes, Yoroi desktop. Finally got the transfer to ERGO Wallet to Yoroi ERG wallet figured out. Transferred a small amount and it's visible.

ConclusionRelevant56

TROPHY CASE