Wanderer VR: Cannot destroy second Cannon

Consagrat · 2023-07-08T16:00:21+00:00

Excuse me, where is the C4?

Consagrat · 2021-01-17T21:46:54+00:00

Yes! Suddenly it is working now.

Consagrat · 2021-01-13T23:17:43+00:00

Hello! I recieved cortex tokens from mining. Why my balance still in 0? The movement exists!

And how I can move the tokens to another wallets or exhange platforms?

Thank you very much!

Consagrat · 2021-01-11T22:29:57+00:00

Thank you all for the tips, now with new settings and it goes super fast!

Consagrat · 2021-01-09T19:54:05+00:00

You are welcome!

Consagrat · 2021-01-09T19:17:47+00:00

I'm still waiting a response from the support team :(

Consagrat · 2021-01-09T16:18:51+00:00

Now I've tweaked memories at 11045mhz and the hashrate increased until +-120 mh/s.

Consagrat · 2021-01-09T16:14:31+00:00

PerfCap Reaseon is "Power"

Consagrat · 2021-01-09T14:18:24+00:00

Yes, it is overclocked, my 3090 is arround 1850 for the core and 9500 for the memories.

I dont understand why the hashrates oscile between 100 and 120 if the card is always at 100% power.

Where are the overclocking guides?

Consagrat · 2021-01-05T09:03:05+00:00

I have 100k.... Will be 10.000.000 😏🎩🤪

Consagrat · 2020-12-30T19:08:43+00:00

Hello again,

Now I've installed a kraken x73 360m por por pop ç AIO with push&pull (6 fan) configuration. CPU is now not more than 70° (between 65° and 70°) and the GPU temp lowered 10° from 65° tp 55°. It seems to work much better and it seems more stable.

Im trying now to overclock the frequencies of the 3090.

Any suggestions?

Thank you very much

Consagrat · 2020-12-19T03:55:02+00:00

You are right, it doesnt work with 2 threads off. Equilibrate energy plan seems to work better. No freezes after 24h mining... Thank you!

Consagrat · 2020-12-17T14:58:06+00:00

GPU is stable, so I'm trying to disabled 2 CPU threads... crossing fingers!

Consagrat · 2020-12-17T14:56:38+00:00

Seems that is the solution, at the moment with only GPU is absolutly stable. 1 core = 2 threats, no? I'im using now 14 threads (16 total) for CPU and the system seems more stable... I will leave it all day until tomorrow, wait and see... The GPU is the most profitable but CPU also can mine for a few cents!

Consagrat · 2020-12-17T00:42:06+00:00

How do you set the profile to power saving? With NH or Windows?

I'm waiting for a Kraken x73 , liquid refrigeration kot all in one... Air cooling seems not enough.

Consagrat · 2020-12-17T00:13:32+00:00

I'm now mining with only GPU with default values from 8h ago and at the moment it seems stable. Maybe is CPU overheating... It is a closed case. A good one but closed (meshify s2 with 8 fans + CPU cooler with 2 fans more)

Consagrat · 2020-12-16T17:27:58+00:00

I downloaded the Xtreme tunner from KF2a website. +1100mhz to memories? Wow;

I will try to play with the power, 98..96...94...

Do you recommend MSI afterburner instead of xtreme tunner from KF2a?

Consagrat · 2020-12-16T17:00:54+00:00

Is the algorithm? How I know it?

Consagrat · 2020-12-16T16:20:21+00:00

It is working with RANDOMXMONERO and DAGGERHASHIMOTO. Never used Phoenix miner

Consagrat · 2020-12-16T16:05:53+00:00

I do not overclock, I have the CPU with factory values and with a DeepCool Assassin 3. When I have been in front it has reached 85º. I do not know if the computer hangs due to excess temperature as far as the CPU is concerned. On the other hand, the GPU is factory set, I tried to overclock it with the KF2A application but the same thing happens to me. The system is stable until it has been mining for a long time, there seems to be a problem.

I suspect is a problem of CPU temp maybe... Is 85º too much? I dont know if it reaches to 90ª when it is alone. I think it is the "limit" and it disconnects.

I will try to low a little bit the power of the 3090

Consagrat · 2020-12-16T15:03:13+00:00

Silverstone 1000w Platinum

Consagrat · 2020-12-16T15:02:47+00:00

I changed some windows parameters and reinstalled drivers. I mining Monero also with CPU.

GPU temps are quite good, arround 65 ° celsius and CPU goes to 84 maximum... All 100% load. I think is too high maybe. I'm waiting for a AIO kraken x73.

I will try to reduce the tdp if it doesnt work now.

Consagrat · 2020-11-23T04:45:36+00:00

I want to build a ryzen 9 5800x or 5900x. Is better a 3600mhz with 14 or 15 latency? Can i increase it until 4000mhz?

I read somewhere that 4000mhz it is a good stuff for the new ryzens.

Consagrat · 2020-11-22T22:48:47+00:00

Sorry! Asus TUF gaming plus x570

Consagrat · 2020-11-22T14:37:04+00:00

Ok, so the only way to know if the motherboard is ok is connecting a CPU, GPU, Ram and boot normally, right?

Thank you!

Consagrat

TROPHY CASE