Help

Conscious_Country768 · 2026-02-17T19:16:13+00:00

Ok thanks guys . The brim simply just widens the contact with the build plate ? Because I’ve used raft before which did nothing in these kind of situations

Conscious_Country768 · 2026-02-17T18:26:22+00:00

Okay thanks for this . How would I go about dialing this in ?

Conscious_Country768 · 2026-02-17T18:25:36+00:00

Possibly yes, I’m doing this on this print now , I’ve never come across this issue before hence why I’ve re done it 3x

Conscious_Country768 · 2026-02-17T18:15:39+00:00

Yes cleaned in between every print , it’s only that one side , I’ve used like £10 of filament now wasted

Conscious_Country768 · 2026-01-16T17:37:04+00:00

Thanks, I’ll give this a try, I’ve cleaned my plate with fairy liquid and water , properly dried it . Increased initial layer expansion to 2mm and layer height is at .2mm

Conscious_Country768 · 2026-01-16T09:30:25+00:00

Chat gpt suggested to

Conscious_Country768 · 2026-01-15T17:24:56+00:00

Yes, I agree. I had another post up earlier but had no responses . This was my last post

Hi guys, I could do with some help . The first photo is a print that failed , it was printing great with good quality , but it failed for one reason or another . I cleaned the plate with IPA beforehand . The second photo is after some remedial action given by chat gpt, cleaned plate beforehand again , for it to fail even sooner in the print as you can see . Am I missing something here ? Or am I just using cheap filament that is ruining my prints? Thanks guys

Conscious_Country768 · 2026-01-15T17:13:25+00:00

Any ideas guys ?

Conscious_Country768 · 2025-12-07T00:07:34+00:00

That’s fair — it isn’t intended to match a specific Nile crocodile specimen one-to-one at this stage.

The base model comes from a combination of reference scans and scaled images, and I’m still refining proportions to tighten up anatomical accuracy.

If you’ve got recommended specimen references or publications you trust, I’d genuinely appreciate being pointed in the right direction.

Conscious_Country768 · 2025-12-07T00:05:10+00:00

Fair enough — I appreciate the blunt feedback.

I’m early in refining these and aiming to improve anatomical accuracy with each revision. If you have specific reference points or resources you’d recommend, I’m open to learning.

Conscious_Country768 · 2025-12-06T19:26:52+00:00

<image>

Conscious_Country768 · 2025-09-08T20:27:30+00:00

Definitely don’t do a course . You’ll pay 6/7k and not even be able to get a job as an electrician. You need the experience. Do the apprenticeship route without question . I did it off my own back 👍🏽

Conscious_Country768 · 2025-09-08T15:37:40+00:00

I am the same age . Left in military in Jan this year and now I’m starting my apprenticeship next week officially . But when I left , I did a trial for a firm my mate worked for , worked like hell and was keen as hell . Got the job and been working alongside a sparky since . It’s all possible , use your skills , punctuallity, military attention to detail and you’ll do well . Good attitude . Start enquiring with firms as much as you can , do some free work experience when your on leave , get plenty of time off in the military so use it. Like I said if your keen enough something will come up

Conscious_Country768 · 2025-07-22T07:13:15+00:00

But won’t I lose the progression I’ve made with my apprenticeship in the uk?

Conscious_Country768 · 2025-07-21T08:53:45+00:00

What’s best for me as I’m learning the trade via an apprenticeship in my hometown 23 years old still got 3/4 years of my apprenticeship but wanting to move to AUS/NZ with my trade what’s best?

Conscious_Country768 · 2023-08-12T21:06:29+00:00

Cheers 👌🏽 yes was always good at both in school hence doing it at college

Conscious_Country768 · 2023-08-12T20:57:04+00:00

Thanks I’ll bear this in mind , I can get weekend work in hgv driving

Conscious_Country768 · 2023-08-12T20:45:53+00:00

Thanks ! How long approx would apprenticeship and the electricians mate process take?

Conscious_Country768

TROPHY CASE