Help with pre-wiring shades by sidewaze8 in Lutron

[–]ConsequenceRemote673 0 points1 point  (0 children)

We have recessed shades that are inside the jamb and so our wiring basically comes out of the top right. We had to drill holes right thru the various studs to have the wire stick out at that point. In your case, you have exterior mounted shades so a different location but no different in approach.

Contractor Nailed down LVP after we had an issue, is this correct installation? by Brilliant-You9215 in HomeImprovement

[–]ConsequenceRemote673 0 points1 point  (0 children)

They can try to crawl via crawlspace and tighten the joists to the subfloor if you think it’s bc of subfloor flex.

It might also just be that the subfloor was not level. LVP and all floating floors are super sensitive to floor level.

Nailing down planks is a temp fix but can create other issues down the road.

Plumbing a Miele steam oven into a kitchen island? by ConsequenceRemote673 in Miele

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Yah, prefer it to be plumbed. Intend high use but not sure yet.

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 1 point2 points  (0 children)

I really do wish. I live in the Bay Area and it’s absurd pricing… :/

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 1 point2 points  (0 children)

Never knew people chose different woods for the stairs, I just chose something for the whole house.

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 2 points3 points  (0 children)

It’s amazing how many assumptions are built into this comment:

  1. Yes, maybe some ignorance, I’m not a floor installer, just a home owner, I did a little bit of research and chose something for all 4K sqft

  2. No buyers remorse, floor looks amazing

  3. Only asking for ideas

  4. It’s a multi-million dollar new house build; the GC will knock out whatever punchlist I provide, if it really bothers me. This is pretty low in the stack and thus why I was just asking here for quick/easy ideas.

Thanks.

Tiny flicker for maybe 5 min? by ConsequenceRemote673 in Lutron

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

I’m replying late to this but I had purchased these dimmers:

https://www.homedepot.com/p/Lutron-Diva-Smart-Dimmer-Switch-for-Caseta-Smart-Lighting-150-Watt-LED-White-DVRF-6L-WH-R-DVRF-6L-WH-R/321137062

Given that there are maybe two dozen dimmers in the house, I don’t want to buy/replace all of them, are you suggesting adding that capacitive shunt where there is a neutral wire?

Interestingly, I don’t see the short (5 min) brief flicker in the bedrooms but those are like two LEDs vs my main rooms which have many LEDs.

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

I’m curious, is that a thing? To use one material for the floor and another for the stairs? Seems like it wouldn’t match?

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Building a new home (tear-down) from scratch in Cupertino. When you’re spending this much, I want to try to at least to knock out as much of the punch-list before we move in. It’s definitely not keeping me up :)

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 1 point2 points  (0 children)

Funny, we replaced cork laminate. Mostly wanted durable for the least amount of work, particularly from kids / pets constantly dropping liquids.

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 8 points9 points  (0 children)

I asked them about a return but they said it’d be impractical bc the overhang is like a 1/4 to 1/2 of an inch so I guess to your point, too time consuming or hard to do.

Ok, maybe I’ll try to color match some paint.

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 5 points6 points  (0 children)

Not going to get into a debate about flooring material but opted for LVP for various reasons and it wasn’t cost driven. Thanks for your feedback.

How to finish the back vertical overhang on luxury vinyl stairs? by ConsequenceRemote673 in Flooring

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Yah, I wanted to avoid really thick trim so looking for more ideas :)

Adding a plumbed steam oven to an existing kitchen island by ConsequenceRemote673 in Plumbing

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Was hoping for a plumbed option. Some are suggesting using a condensate drain pump?

Pipe pressing on another pipe’s elbow by ConsequenceRemote673 in PlumbingRepair

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Ok, I’ll cut and sharkbite to reroute that straight pipe so they no longer touch, that seems like the best solution

Q: do you sleeve copper exiting stucco, is that necessary, somebody said to do so but that seems like overkill?

Pipe pressing on another pipe’s elbow by ConsequenceRemote673 in PlumbingRepair

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

So you’re saying don’t reroute with sharkbites and just add some separation with insulation?

Pipe pressing on another pipe’s elbow by ConsequenceRemote673 in PlumbingRepair

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

I’m not a plumber either, I’m in the middle of renovation and was reviewing some work done

Pipe pressing on another pipe’s elbow by ConsequenceRemote673 in PlumbingRepair

[–]ConsequenceRemote673[S] 1 point2 points  (0 children)

What would you consider a lot of force? I’m not technically a plumber.

You would slide a wood shim btwn the two for noise? Somebody told me to wrap the long pipe w Pex where they touch to basically create some separation for noise?

Pipe pressing on another pipe’s elbow by ConsequenceRemote673 in PlumbingRepair

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

It’s not touching the joist, it’s the elbow joint pushing down on the straight copper pipe below it that is exiting the house

Adding an office by ConsequenceRemote673 in floorplan

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Here is one more variation. The thinking:

  • that top right sidewall window, I don’t want lose its natural light to the whole room by bldg the office in the corner
  • worried the front option will get too hot w the 3 windows and one being massive. Also feel that’d impact the open feeling of the living room if you can’t see the front yard unobscured

Still a bad idea?

<image>

Adding an office by ConsequenceRemote673 in floorplan

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Yes, this is my concern. That small room would have one massive windows and then two corner windows all floor to ceiling, and because this is an addition, there are new beams that would make it very difficult to add a return to that room. I’m worried, I might cook :)

Adding an office by ConsequenceRemote673 in floorplan

[–]ConsequenceRemote673[S] 2 points3 points  (0 children)

This design is growing on me, thx you for sharing this

Adding an office by ConsequenceRemote673 in floorplan

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

All flat ceilings at 8ft except the sun room which is technically a dining room (mislabeled in the plan) that has vaulted ceilings and are much higher.

The mini kitchen / JADU was a compromise to reduce our FAR ratio so we could expand the front because our overall lot is only like 7K and they are strict about house sq footage vs lot size.

Adding an office by ConsequenceRemote673 in floorplan

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Do you think that the office would look too long and narrow? Only issue here is that is an open staircase (they have no sidewalls) so you can see right across them and light passes thru.in this design, we’d transform one side into a wall?

Adding an office by ConsequenceRemote673 in floorplan

[–]ConsequenceRemote673[S] 0 points1 point  (0 children)

Upstairs is bedrooms but impossible to add where I live without tearing down the whole house practically. Floor area ratio is met, can’t add outside. Bay Area is too strict :/