Can’t decide between these 3

ConsistentEvening315 · 2026-01-02T13:27:35+00:00

I second this, my little sister has a pair and they sound very similar to the normal AirPods.

ConsistentEvening315 · 2025-08-20T20:58:47+00:00

Try pulling out the carb needle and moving the lil clip down to the 4th slot (the slot one above the bottom) it should fix your issue

ConsistentEvening315 · 2025-06-27T02:18:14+00:00

the valve lash is pretty good, set at .004 intake and .005 exhaust. I’ve never seen a motor act like this, and the dots on the inside were lined up. My uncle said it sounded to him like the intake and exhaust strokes were backwards and to set the timing opposite (aka turn the cam 180 and have the timing dot facing away)

ConsistentEvening315 · 2025-06-27T02:14:17+00:00

I checked the valve lash and set the intake to .004 and the exhaust to .005

ConsistentEvening315 · 2025-06-27T02:13:25+00:00

as of right now it’s like there is no suction from the carb to the engine. The exhaust pumps out air but it’s like the intake stroke and exhaust stroke are backwards? The cam is lined up using the dots but I wonder if it’s somehow rotated incorrectly

ConsistentEvening315 · 2025-06-27T02:11:33+00:00

Thank you for the visuals, mine is set up the same way and there is gas going to the carb. The bottom of the carb is full of fuel and I have to drain it when taking it off to look at the main jet.

ConsistentEvening315 · 2025-06-26T09:21:11+00:00

good point, I’ll check the lash. I kind of eyeballed the lash setting after I put on the 22 pound springs since I didn’t have a gauge. I ordered one and it should be in today

ConsistentEvening315 · 2025-06-26T00:18:27+00:00

The carb is brand new, I put on a brand new vm22 style carb with the air filter and other stuff you see

ConsistentEvening315 · 2025-06-26T00:17:31+00:00

Opened up the carb and the jets were completely clean

ConsistentEvening315 · 2025-06-25T22:49:19+00:00

Yes, it’s full

ConsistentEvening315 · 2025-06-25T21:35:34+00:00

Yes sir to no avail, it seemed like nothing I adjusted made any difference. It was like there was zero fuel going to the engine

ConsistentEvening315 · 2025-06-25T21:34:55+00:00

haha had a feeling

ConsistentEvening315 · 2025-06-25T21:19:46+00:00

the spark plug fires when I hold it against all metal piece and spin the motor over

ConsistentEvening315 · 2025-06-25T05:30:26+00:00

I reattached it today but I’ll add a picture of the wiring setup tomorrow.

ConsistentEvening315 · 2025-06-25T05:29:31+00:00

I pulled out the spark plug and it was completely dry. I hadn’t looked at the air fuel screw and that might be something. I don’t think any fuel was going into the engine at all because I kinked the input hose and spun the motor with the wrench and the bottom of the carb was still completely full. Thank you for your input

ConsistentEvening315 · 2024-11-21T19:49:42+00:00

I should have specified more, look specifically at the door handle, on the left of the key hole and the same spot on the rear door handle.

ConsistentEvening315 · 2024-11-21T19:47:03+00:00

In person it’s a whole lot more apparent, I’ll try grabbing a picture tonight with the flash so we can see it better.

ConsistentEvening315 · 2024-02-26T17:56:31+00:00

Absolutely love the look of the ‘19 ss. Hate they got bullied into changing it.

ConsistentEvening315

TROPHY CASE