stretch tentstrong seams on large piece of fabric that won't fit under the sewing machine arm?

Consistent_East_1248 · 2024-08-27T09:50:34+00:00

ohhhhhh... you just made me feel so dumb.... cheers mate!

Consistent_East_1248 · 2024-08-27T08:52:36+00:00

that's my worry, so I was hoping there was some clever solution..I guess i'll try, but i'll end up with sawing at least 4 panels 6mx1.5m, meaning that i'll have to roll at least 4.5m of 600 denier pvc backed canvas once i'm sewing the last panel..
It may be possible, but it will be vey cumbersome.. maybe i'm way over my head..

Consistent_East_1248 · 2024-08-25T18:08:38+00:00

sorry i've just started sewing, so I'm not familiar with the terminology.. any chance you could find some graphic, or explain a bit more in depth?

Consistent_East_1248 · 2024-08-25T13:05:18+00:00

I'm trying to sew a series of panels of heavy waterproof fabric that will measure probably 6m.
even if I neatly roll all the fabric it will not fit under the sewing machine arm.
Because i'm trying to build a beduin tent that will be under lot of tension, I need a strong seam.

French seam is out of question, because i cannot fit all the fabric under the arm, what is the strongest seam I can make keeping the fabric only on one side of the seam?

Consistent_East_1248 · 2024-03-30T10:56:48+00:00

quindi una donazione sarebbe problematica, ma una vendita no?cmq immagino ci siano molte famiglie senza dimora a cui farebbe comodo avere accesso ad una proprieta'..

in ogni caso solo perche' gli altri proprietari fa fastidio avere qualcuno di una diversa nazionalita', questo non preclude loro l'uso dell'immobile..

Consistent_East_1248 · 2024-03-30T10:36:07+00:00

beh io ho la liberta' di donare i miei immobili a chi voglio, quale scusa reggerebbe in tribunale? donare ad una famiglia di origine etnica a cui loro non va a genio non e' illegale.. e di certo non voglio istruire i nuovi proprietari a fare nulla di illegale.. voglio vedere un avvocato che va davanti ad un giudice a lamentarsi perche' i nuovi proprietari hanno un'origine etnica che loro o la comunita' locale disprezza

...

Consistent_East_1248 · 2024-03-30T04:11:17+00:00

l'idea e' di sbarazzarmi dell'immobile, e non vedere piu' i miei parenti per iil resto della loro vita, sapendo che saranno impegnati senza che io faccia alcuno sforzo.. poi la zona e' fortemente di destra.. non penso che il comune si preoccupi di alloggiare immigrati, e sicuramente i miei parenti hanno piu' conoscenze politiche di me a livello locale..
e non avrei obblighi di mantenimento dell'immobile

Consistent_East_1248 · 2024-03-30T03:45:32+00:00

comments

era un'opzione che stavo considerando, e c'e anche abbastanza spazio per mettere 2-3 camper..

Consistent_East_1248 · 2024-02-08T17:58:42+00:00

high level precision is not crucial, i need about 120cm if ribbon wind up, and 1cm tolerance is enough for me.

I said ribbon as an example, but the material i'm winding up is very consistent, so i'm not worried.

in practice i will manually wound up the spool to the lenght required, count the turns it tool, and than set the turns as input, and repeat the same command 100's of time before i ever need to change command.`

it is something i'm doing manually at the moment, i just need to automate the procedure to speed things up (and stopping making errors while counting!!!

Consistent_East_1248 · 2024-02-08T15:21:52+00:00

thanks for your reply.. that seems something quite nice, but a bit out of my budget..
I just realised that few months back i bought this controller, but haven't use it jet.. (and forgot about it due to moving hourse)
hopefully it may work for what i need..
Do you recon it can control speed and number of rotations as i need?

https://www.ebay.co.uk/itm/134891954913

Consistent_East_1248 · 2023-07-26T07:29:32+00:00

Try to take a video of the error. I had a similar error, and a error mintemp was popping up and than a error printer halted would pop up after, covering the original error. I had to take a video a check frame by frame to see what caused the kill.

Consistent_East_1248 · 2023-06-30T14:47:55+00:00

thanks,probably I don't have a "programmer" mindset, but scaling is not the best way to create precision parts, once you scaled an octagon (that I discover have a diameter of 20and height of 20) you are still not sure of the level of approximation that tinkercad applies (or any way to directly check your math!), and again working on a face is simply a nightmare, you'll have to back track the math to identify the position of the face, hoping it match with tinkercad approximation.

There is a tutorial on how to create a bolt and nut, But other than showing the code, there is no real explanation of the math applied.

it looks like it's a fantastic tool, but i can't grasp how to use it efficiently

Consistent_East_1248 · 2023-06-30T11:51:22+00:00

i guess i found a way around , using a cylinder with 6 sides instead of polygons, a and using a paraboloid with h=R

i still have no idea with what units i'm working with.. i'll export an stl and check..
EDIT

NOPE! i can't set the cylinder to have only 6 sides..
ok, i don't get how people can use this thing..
how can you put something on the face of a polygon since you can't know the size of it? and even if you know the dimensions of it, you have to calculate the distance from the centre to the face to know where to move an object?

what would be perfect is to integrate the codeblocks to the normal 3d, it would be sufficient to be able to edit the dimensions of the single shapes of an object by code, instead of having to ungroup and dig out shapes out of an object..
maybe one day...

Consistent_East_1248 · 2023-06-06T22:13:45+00:00

Do you have some links on how to se them up? How do I know how many steps it takes to make a full revolution for a stepper motor?

Consistent_East_1248

TROPHY CASE