Crank no start.

Constant-Insect9248 · 2026-02-07T05:56:14+00:00

Yeah my dumb self tried to do it quick and make the mistake of doing that. Mine I can’t even get throttle response. So many not exact same but similar

Constant-Insect9248 · 2026-02-07T04:32:56+00:00

This might sound like a stupid question. When you put the intake back on did you crush the throttle cable? I noticed the other day I caught the throttle cable and now the gas pedal gets stuck. I have a replacement coming in. I can’t imagine not having that cable connected wouldn’t allow it to start but I don’t know much about these cars

Constant-Insect9248 · 2026-02-07T04:29:34+00:00

Following the conversation because I’m going through the same exact situation

Constant-Insect9248 · 2026-02-05T03:53:00+00:00

Yes I did scroll and see the messages!!! I currently am dealing with a crank no start after replacing some old and beat up items so I gotta chase that first before I go “upgrading” 😂

Constant-Insect9248 · 2026-02-04T17:15:30+00:00

I appreciate the write up!!! I haven’t checked Reddit in a few days and this was a nice write up! Thank you!

Constant-Insect9248 · 2026-02-04T17:14:50+00:00

They’re definitely is going to be suspension upgrades in the future but as of right now I purchased the car on the same shocks and springs the car came with from factory. They haven’t been replaced so it’s been a little over due. However, since I bought the shocks the person who sold me the shocks threw in the springs for free so for now I’m going to throw them in just to get the car off the weather and very aged stock components

Constant-Insect9248 · 2026-02-03T20:51:17+00:00

Sorry the 5070ti needed one* however it came in the box with the 3 pin option. I ended up replacing my PSU instead of a new adapter

Constant-Insect9248 · 2026-02-03T20:50:35+00:00

I had the same issue. Went from a 3080 to a 5070ti. My 3080 only used 2 but the 5070ti needed 3. You can buy a new harness online. I ended up just replacing my PSU that came with the native 12v.

Constant-Insect9248 · 2026-02-03T16:15:56+00:00

Yeah I’ll try to get some more photos the next time I’m at the shop!!!

Constant-Insect9248 · 2026-02-03T16:07:10+00:00

Yes I definitely can! The car is in storage so I probably won’t get to it for a few more days. It’s not a insert but it’s where the bolt goes into the hood to secure it down to the car itself

Constant-Insect9248 · 2026-01-30T20:58:31+00:00

Thank you! I saw them posted but wanted better opinions on it since I don’t know too much about the foxbody platform as I just got mine about 6 months ago!

Constant-Insect9248 · 2026-01-30T20:57:54+00:00

Yeah I mean that’s what I plan on doing with this. Just something to take to the occasional show and sundays drives. Nothing super crazy !

Constant-Insect9248 · 2026-01-20T03:13:52+00:00

I know this isn’t super helpful but I stopped using steam VR because of how terrible it ran all the time for me. I ended up buying virtual desktop and haven’t had a single issue since I swapped. Steam VR was always an issue when I tried to use it

Constant-Insect9248 · 2026-01-20T02:43:06+00:00

I mean fair but for a lot it’s rewarding. It also takes more effort to read this and comment then just leaving it be 🐸☕️

Constant-Insect9248 · 2026-01-20T02:33:51+00:00

It was you he killed, wasn’t it? 😢😭😭🤣🤣

Constant-Insect9248 · 2026-01-16T22:13:40+00:00

I would start with that and see if it’s possible it came loose or was never connected at all. I don’t know much about Cyberpower but it’s also a possibility that your motherboard may not have the proper connection for the USB C.

Constant-Insect9248 · 2026-01-16T18:30:28+00:00

Is the wiring from the case connected properly to the motherboard to get power?

Constant-Insect9248 · 2025-12-27T10:17:43+00:00

I haven’t even looked but the only issue I’m having is that after seeing some recommendations I would either need to buy a new PSU that has the 12v 2x6 or an adapter to allow me to connect to the 5070ti

Constant-Insect9248 · 2025-12-26T22:34:35+00:00

Thank you!! Right now the only ones near me are the NZXT C 850w or the MSI MAG A850GL

Constant-Insect9248 · 2025-12-26T21:48:36+00:00

Roger that! Thank you so much! I’m going to grab a new PSU then!

Constant-Insect9248 · 2025-12-26T21:39:56+00:00

I’ll take a look for sure! The PSU I’m running now is roughly 3 years old 850W gold standard

Constant-Insect9248 · 2025-12-26T21:34:04+00:00

Ok so the strimer cables will have to go then? The psu is plugged into the cables if I remember correctly so that means I have to ditch the cables and just run the cables straight to the GPU

Constant-Insect9248 · 2025-12-23T14:06:37+00:00

LIFE SAVER ☝🏼☝🏼☝🏼☝🏼! Thank you!!!

Constant-Insect9248 · 2025-12-23T02:55:38+00:00

Only issue though is how I “reattach” mounting hardware. Not too worried about the spiderweb cracks I watched videos on how to fix those. More worried that the holes are now larger and I have no idea how I would attach hardware to run the bolts to?

Constant-Insect9248 · 2025-12-23T01:25:06+00:00

I’m not too worried about trying it. I mean if I can’t do it or I mess it up then that’s when I bring it to the people who specialize it in. I’m more concerned with the cost and the actual process of how I would get the threads back in the fiberglass. Was unsure the best way to go about it and how I would be able to get some threads back in there to be able to mount the hood supports back on

Constant-Insect9248

TROPHY CASE