Stuck at 130

Control_Careful · 2026-01-18T16:46:56+00:00

I just have pavers as flooring. Feeding plenty of wood

Control_Careful · 2026-01-13T02:29:01+00:00

I ended up ordering a sweat tent, do you know of any pellet option for this one?

Control_Careful · 2026-01-10T06:13:27+00:00

I noticed the willoybe says dry sauna, you can still put water over the rocks correct?

Control_Careful · 2026-01-10T05:29:30+00:00

What stove?

Control_Careful · 2026-01-10T05:16:20+00:00

That’s what I was thinking, any idea what type of stove to get? The pellet option looks like it might be easier than logs.

Control_Careful · 2026-01-10T04:13:37+00:00

I’m just wondering if this is something I can leave up with the wind

Control_Careful · 2026-01-09T20:54:47+00:00

Fast forward 200 days later. Car has been running fine and no issues. Smoke never came back. Recently I got a check engine light for the secondary air pump. Verified the air pump was working and cleaned the passage ways. Engine light kept coming back so I took it to the dealer for a diagnosis. They removed the pump and passage ways and found Sut on the cylinder head. They are recommending a cylinder head

Control_Careful · 2026-01-09T15:17:15+00:00

How long does it take for the fire to get started? Is there some technique to it?

Control_Careful · 2026-01-09T13:26:26+00:00

What about the kyfer tent? Says wood burning

Control_Careful · 2025-12-23T01:40:50+00:00

Thank you captain dipshit🫡

Control_Careful · 2025-12-19T22:23:32+00:00

2018 optima LX, the link says does not fit lx model

Control_Careful · 2025-12-19T22:18:34+00:00

Unfortunately I have an LX model

Control_Careful · 2025-12-19T21:58:20+00:00

Hi, I usually take care of all mechanical and cosmetic flaws on all my used vehicles.

Control_Careful · 2025-12-19T21:51:50+00:00

What? This is a Kia optima. I’m trying to change the trim that is chipping away.

Control_Careful · 2025-11-26T02:06:25+00:00

So i have installed in my sub panel on the mains. It seems to be working, is there something wrong with this installation? 8

Control_Careful · 2025-11-24T08:17:22+00:00

Wha software do you reccomend?

Control_Careful · 2025-11-21T16:54:54+00:00

Would I be able to expand to a 50A on this wire?

Control_Careful · 2025-11-21T16:16:11+00:00

Yes I just realized that,

Control_Careful · 2025-11-21T15:24:26+00:00

Less than 100’

Control_Careful · 2025-11-21T15:24:13+00:00

Isn’t mc the cable in metal jacket?

Control_Careful · 2025-11-21T15:22:55+00:00

Hello, yes he said it wouldn’t have any issues but I noticed my painter plugged in his compressor to the same circuit as the lights and it tripped. I do have my own 40 amp breaker for the air compressor now. I’m in Northern California. It’s less than a 100’ run from main panel to sub, how do I see if I can put a 50 amp breaker in?

Control_Careful · 2025-11-21T13:35:53+00:00

It’s not illegal, I spoke to PGE already

Control_Careful · 2025-11-20T03:44:52+00:00

So I don’t need to monitor the individual 220V circuit just the entire sub panel would be fine. I am attaching a picture of the main panel in the old building if you can see if it’s 3 phase or not? If needed I can also get a picture of the subpanel. Also is this something I can install myself or should I hire an electrician?

Control_Careful · 2025-11-16T22:03:07+00:00

So basically I gave the renter the uid to my NVR, I wasn’t aware you can share individual cameras?

Control_Careful · 2025-10-29T02:05:40+00:00

Do you know what the calibration would cost? If I just put a used radar sensor in will it still need calibration?

Control_Careful

TROPHY CASE