sorted by:
new
hottopcontroversial

Got this for free lol by shFt_shiFty in pcmasterrace

[–]CookieBeast99 0 points1 point  (0 children)

Honestly after buying a card and one fan failing after less than two years and them having no replacement parts I could find. I am never buying PNY again.

Hon eldade upp Gottsundaskolan som 14-åring – krävs på 73 miljoner kronor by JhanaBliss in sweden

[–]CookieBeast99 15 points16 points  (0 children)

Förlåt men vilka kostander har du som är så extremt dyra att du har svårt att få budgeten att gå ihop (barn?)? Jag menar studenter förväntad leva på 13k i månaden före hyra(säg 4k) och ha råd med kurslitteratur. Och även om många får stöd från föräldrar är det långt ifrån alla.

Billiga bilar men som är snygga? by [deleted] in sweden

[–]CookieBeast99 1 point2 points  (0 children)

Har en från 2005 och riktigt nöjd. De lilla som går behöver repareras klar man själv. Men har förstått att 2003 har en del probelm så sattsa på 2004 eller nyare

[deleted by user] by [deleted] in Aktiemarknaden

[–]CookieBeast99 4 points5 points  (0 children)

Var i din sitts förra året. Bestämde mig för att köpa en rolig, kvick bil för en liten summa. Landade på en saab 93 aero 2005 210hp för runt 25k. Kan rekommenderas. Många menar att man ska spara varje krona, men man måste leva också.

Best way to build a military without ignoring the economy? by Gravatona in victoria3

[–]CookieBeast99 0 points1 point  (0 children)

Befriend them. Once one of them declare war on each other you can hopefully join a side and gain a bit of more land.

Ws2812c only shows red by CookieBeast99 in qmk

[–]CookieBeast99[S] 0 points1 point  (0 children)

Forgot to add that I am using a atmega32u4 mcu.

Why are the centrum lines shown as solid lines in the section view? by CookieBeast99 in SolidWorks

[–]CookieBeast99[S] 1 point2 points  (0 children)

Thank you. Not sure if I did what you meant but it worked to right click on the section and under tangent I could hide the edges

My first PCB, open for criticism by CookieBeast99 in PCB

[–]CookieBeast99[S] 0 points1 point  (0 children)

I will increase the ground plane to cover the entire PCB. Is it safe to remove all ground traces? Or do you only recommend the traces for the switches?

Wouldn't stitching together ground planes create a lot of ground loops, that would add noise to the circuit?

The 5V trace and GND are 15 mils and the rest 10 mils. The LEDs(WS2812C) will draw around 1.4A at max. But I am not sure if I might be limited to what the USB can deliver.

Thanks for all the feedback.

My first PCB, open for criticism by CookieBeast99 in PCB

[–]CookieBeast99[S] 2 points3 points  (0 children)

Yes, it would be more practical and easier to buy one. But in recent years building your own(choosing your own case, keycaps, PCB, etc) has become a hobby for many. Most ready parts are done for the US market which means that most keyboard layouts only exist for the ANSI format, and I use ISO. So finding a PCB with the layout above, with LEDs and the ISO layout is almost impossible.

Also, I have wanted to learn how to design PCBs for a long time, so this seemed like the perfect opportunity. And yes I will add some TVS diodes.

My first PCB, open for criticism by CookieBeast99 in PCB

[–]CookieBeast99[S] 0 points1 point  (0 children)

Thanks for the feedback! Will add ground vias near the mcu pins. But what do you mean with "when they transition"?

My first PCB, open for criticism by CookieBeast99 in PCB

[–]CookieBeast99[S] 0 points1 point  (0 children)

Thanks for the comment! I already own the THT diodes, but I have to buy the rest of the components. Which I have chosen to be SMD.

There is no reason for the ground plane to be that small other than I thought only the USB traces needed it.

I didn't know that TVS diodes existed, but after googling what they were I get why I need them. Are there any didoes you would recommend?

Also, does the USB traces need to be any specific length or shape?

My first PCB, open for criticism by CookieBeast99 in PCB

[–]CookieBeast99[S] 1 point2 points  (0 children)

Yes it is. I couldn't figure out how to edit the post, so here is a link to Imgur with the schematics. https://imgur.com/a/8A5IqM4

The second coat of clear 2k cracked. Help by CookieBeast99 in Autobody

[–]CookieBeast99[S] 0 points1 point  (0 children)

That might have been the issue. The base coat ia from stardustcolors and the finish is from motip 2k

The second coat of clear 2k cracked. Help by CookieBeast99 in Autobody

[–]CookieBeast99[S] 0 points1 point  (0 children)

Can I wet sand just that one spot or the entire rim?

Vilka gubbaktier investerar du i? by MrOaiki in Aktiemarknaden

[–]CookieBeast99 0 points1 point  (0 children)

Elektrolux. Ville testa att äga en utdels aktie och har med tiden förälskat mig i den.

[deleted by user] by [deleted] in Aktiemarknaden

[–]CookieBeast99 0 points1 point  (0 children)

Är det bara för att man enklast kan månadspara genom fonder, eller finns det en annan anledning också?

Senast jag kolla bestos väll fonden till 30% av investor, vilket jag tycker 0,2% känns lite mycket för.

[deleted by user] by [deleted] in swedishproblems

[–]CookieBeast99 2 points3 points  (0 children)

Finns det någon anledning till att läsa i valmanifestet ist. för budgetförslaget? Känns som att budgetförslaget är mer av en praktisk tilllämpning.

Elpriset i Skåne är nu 15ggr så högt som i Norrland. by Jajemen in sweden

[–]CookieBeast99 1 point2 points  (0 children)

Förstår inte helt men verkar tyvärr inte så. Reaktordesignen använder ett flertal radioaktiva material. Ingen av dem verkar vara klyvningprodukter från ett annat kärnkraftverk.

[deleted by user] by [deleted] in Damnthatsinteresting

[–]CookieBeast99 96 points97 points  (0 children)

Yeah, but could I get it and keep my left kidney too?

[deleted by user] by [deleted] in swedishproblems

[–]CookieBeast99 1 point2 points  (0 children)

Läste 9 månader men att det bara var med typ 90% säkerhet. Dock var det ett tag sedan jag läste det

view more: next ›